blob: 4b08043de5059003d11058a0a5db8109e9ca13c7 [file] [log] [blame] [raw]
/* i8255.c: Intel i8255 PIO adapter
Copyright (c) 2010, William A. Beech
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
WILLIAM A. BEECH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of William A. Beech shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from William A. Beech.
These functions support a simulated i8255 interface device on an iSBC.
The device has threee physical 8-bit I/O ports which could be connected
to any parallel I/O device.
All I/O is via programmed I/O. The i8255 has a control port (PIOS)
and three data ports (PIOA, PIOB, and PIOC).
The simulated device supports a select from I/O space and two address lines.
The data ports are at the lower addresses and the control port is at
the highest.
A write to the control port can configure the device:
Control Word
+---+---+---+---+---+---+---+---+
| D7 D6 D5 D4 D3 D2 D1 D0|
+---+---+---+---+---+---+---+---+
Group B
D0 Port C (lower) 1-Input, 0-Output
D1 Port B 1-Input, 0-Output
D2 Mode Selection 0-Mode 0, 1-Mode 1
Group A
D3 Port C (upper) 1-Input, 0-Output
D4 Port A 1-Input, 0-Output
D5-6 Mode Selection 00-Mode 0, 01-Mode 1, 1X-Mode 2
D7 Mode Set Flag 1=Active, 0=Bit Set
Mode 0 - Basic Input/Output
Mode 1 - Strobed Input/Output
Mode 2 - Bidirectional Bus
Bit Set - D7=0, D3:1 select port C bit, D0 1=set, 0=reset
A read to the data ports gets the current port value, a write
to the data ports writes the character to the device.
?? ??? 10 - Original file.
16 Dec 12 - Modified to use isbc_80_10.cfg file to set base and size.
*/
#include "system_defs.h"
extern int32 reg_dev(int32 (*routine)(int32, int32), int32 port);
/* function prototypes */
t_stat pata_reset (DEVICE *dptr, int32 base);
/* i8255 Standard I/O Data Structures */
UNIT pata_unit[] = {
{ UDATA (0, 0, 0) }
};
REG pata_reg[] = {
{ HRDATA (CONTROL0, pata_unit[0].u3, 8) },
{ HRDATA (PORTA0, pata_unit[0].u4, 8) },
{ HRDATA (PORTB0, pata_unit[0].u5, 8) },
{ HRDATA (PORTC0, pata_unit[0].u6, 8) },
{ NULL }
};
DEVICE pata_dev = {
"PATA", //name
pata_unit, //units
pata_reg, //registers
NULL, //modifiers
1, //numunits
16, //aradix
32, //awidth
1, //aincr
16, //dradix
8, //dwidth
NULL, //examine
NULL, //deposit
// &pata_reset, //reset
NULL, //reset
NULL, //boot
NULL, //attach
NULL, //detach
NULL, //ctxt
0, //flags
0, //dctrl
NULL, //debflags
NULL, //msize
NULL //lname
};
/* I/O instruction handlers, called from the CPU module when an
IN or OUT instruction is issued.
*/
int32 patas(int32 io, int32 data)
{
int32 bit;
if (io == 0) { /* read status port */
return pata_unit[0].u3;
} else { /* write status port */
if (data & 0x80) { /* mode instruction */
pata_unit[0].u3 = data;
sim_printf("PATA: 8255 Mode Instruction=%02X\n", data);
if (data & 0x64)
sim_printf(" Mode 1 and 2 not yet implemented\n");
} else { /* bit set */
bit = (data & 0x0E) >> 1; /* get bit number */
if (data & 0x01) { /* set bit */
pata_unit[0].u6 |= (0x01 << bit);
} else { /* reset bit */
pata_unit[0].u6 &= ~(0x01 << bit);
}
}
}
return 0;
}
int32 pataa(int32 io, int32 data)
{
if (io == 0) { /* read data port */
return (pata_unit[0].u4);
} else { /* write data port */
pata_unit[0].u4 = data;
sim_printf("PATA: 8255 Port A = %02X\n", data);
}
return 0;
}
int32 patab(int32 io, int32 data)
{
if (io == 0) { /* read data port */
return (pata_unit[0].u5);
} else { /* write data port */
pata_unit[0].u5 = data;
sim_printf("PATA: 8255 Port B = %02X\n", data);
}
return 0;
}
int32 patac(int32 io, int32 data)
{
if (io == 0) { /* read data port */
return (pata_unit[0].u6);
} else { /* write data port */
pata_unit[0].u6 = data;
sim_printf("PATA: 8255 Port C = %02X\n", data);
}
return 0;
}
/* Reset routine */
t_stat pata_reset (DEVICE *dptr, int32 base)
{
pata_unit[0].u3 = 0x9B; /* control */
pata_unit[0].u4 = 0xFF; /* Port A */
pata_unit[0].u5 = 0xFF; /* Port B */
pata_unit[0].u6 = 0xFF; /* Port C */
reg_dev(pataa, base);
reg_dev(patab, base + 1);
reg_dev(patac, base + 2);
reg_dev(patas, base + 3);
sim_printf(" PATA: Reset\n");
return SCPE_OK;
}