| /* 3b2_mmu.c: AT&T 3B2 Model 400 MMU (WE32101) Implementation | |
| Copyright (c) 2017, Seth J. Morabito | |
| Permission is hereby granted, free of charge, to any person | |
| obtaining a copy of this software and associated documentation | |
| files (the "Software"), to deal in the Software without | |
| restriction, including without limitation the rights to use, copy, | |
| modify, merge, publish, distribute, sublicense, and/or sell copies | |
| of the Software, and to permit persons to whom the Software is | |
| furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be | |
| included in all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
| BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
| ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| SOFTWARE. | |
| Except as contained in this notice, the name of the author shall | |
| not be used in advertising or otherwise to promote the sale, use or | |
| other dealings in this Software without prior written authorization | |
| from the author. | |
| */ | |
| #include "3b2_mmu.h" | |
| UNIT mmu_unit = { UDATA(NULL, 0, 0) }; | |
| MMU_STATE mmu_state; | |
| REG mmu_reg[] = { | |
| { HRDATAD (ENABLE, mmu_state.enabled, 1, "Enabled?") }, | |
| { HRDATAD (CONFIG, mmu_state.conf, 32, "Configuration") }, | |
| { HRDATAD (VAR, mmu_state.var, 32, "Virtual Address") }, | |
| { HRDATAD (FCODE, mmu_state.fcode, 32, "Fault Code") }, | |
| { HRDATAD (FADDR, mmu_state.faddr, 32, "Fault Address") }, | |
| { BRDATA (SDCL, mmu_state.sdcl, 16, 32, MMU_SDCS) }, | |
| { BRDATA (SDCR, mmu_state.sdch, 16, 32, MMU_SDCS) }, | |
| { BRDATA (PDCLL, mmu_state.pdcll, 16, 32, MMU_PDCS) }, | |
| { BRDATA (PDCLH, mmu_state.pdclh, 16, 32, MMU_PDCS) }, | |
| { BRDATA (PDCRL, mmu_state.pdcrl, 16, 32, MMU_PDCS) }, | |
| { BRDATA (PDCRH, mmu_state.pdcrh, 16, 32, MMU_PDCS) }, | |
| { BRDATA (SRAMA, mmu_state.sra, 16, 32, MMU_SRS) }, | |
| { BRDATA (SRAMB, mmu_state.srb, 16, 32, MMU_SRS) }, | |
| { NULL } | |
| }; | |
| DEVICE mmu_dev = { | |
| "MMU", &mmu_unit, mmu_reg, NULL, | |
| 1, 16, 8, 4, 16, 32, | |
| NULL, NULL, &mmu_init, | |
| NULL, NULL, NULL, NULL, | |
| DEV_DEBUG, 0, sys_deb_tab | |
| }; | |
| t_stat mmu_init(DEVICE *dptr) | |
| { | |
| flush_caches(); | |
| return SCPE_OK; | |
| } | |
| uint32 mmu_read(uint32 pa, size_t size) | |
| { | |
| uint32 offset; | |
| uint32 data = 0; | |
| offset = (pa >> 2) & 0x1f; | |
| switch ((pa >> 8) & 0xf) { | |
| case MMU_SDCL: | |
| data = mmu_state.sdcl[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_SDCL[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_SDCH: | |
| data = mmu_state.sdch[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_SDCH[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_PDCRL: | |
| data = mmu_state.pdcrl[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_PDCRL[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_PDCRH: | |
| data = mmu_state.pdcrh[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_PDCRH[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_PDCLL: | |
| data = mmu_state.pdcll[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_PDCLL[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_PDCLH: | |
| data = mmu_state.pdclh[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "MMU_PDCLH[%d] = %08x\n", | |
| offset, data); | |
| break; | |
| case MMU_SRAMA: | |
| data = mmu_state.sra[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] MMU_SRAMA[%d] = %08x\n", | |
| R[NUM_PC], offset, data); | |
| break; | |
| case MMU_SRAMB: | |
| data = mmu_state.srb[offset]; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] MMU_SRAMB[%d] = %08x\n", | |
| R[NUM_PC], offset, data); | |
| break; | |
| case MMU_FC: | |
| data = mmu_state.fcode; | |
| break; | |
| case MMU_FA: | |
| data = mmu_state.faddr; | |
| break; | |
| case MMU_CONF: | |
| data = mmu_state.conf & 0x7; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] MMU_CONF = %08x\n", | |
| R[NUM_PC], data); | |
| break; | |
| case MMU_VAR: | |
| data = mmu_state.var; | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] MMU_VAR = %08x\n", | |
| R[NUM_PC], data); | |
| break; | |
| } | |
| return data; | |
| } | |
| void mmu_write(uint32 pa, uint32 val, size_t size) | |
| { | |
| uint32 offset; | |
| offset = (pa >> 2) & 0x1f; | |
| switch ((pa >> 8) & 0xf) { | |
| case MMU_SDCL: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_SDCL[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.sdcl[offset] = val; | |
| break; | |
| case MMU_SDCH: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_SDCH[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.sdch[offset] = val; | |
| break; | |
| case MMU_PDCRL: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_PDCRL[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.pdcrl[offset] = val; | |
| break; | |
| case MMU_PDCRH: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_PDCRH[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.pdcrh[offset] = val; | |
| break; | |
| case MMU_PDCLL: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_PDCLL[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.pdcll[offset] = val; | |
| break; | |
| case MMU_PDCLH: | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "MMU_PDCLH[%d] = %08x\n", | |
| offset, val); | |
| mmu_state.pdclh[offset] = val; | |
| break; | |
| case MMU_SRAMA: | |
| offset = offset & 3; | |
| mmu_state.sra[offset] = val; | |
| mmu_state.sec[offset].addr = val & 0xffffffe0; | |
| /* We flush the entire section on writing SRAMA */ | |
| flush_cache_sec((uint8) offset); | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] MMU_SRAMA[%d] = %08x (addr=%08x)\n", | |
| R[NUM_PC], offset, val, mmu_state.sec[offset].addr); | |
| break; | |
| case MMU_SRAMB: | |
| offset = offset & 3; | |
| mmu_state.srb[offset] = val; | |
| mmu_state.sec[offset].len = (val >> 10) & 0x1fff; | |
| /* We do not flush the cache on writing SRAMB */ | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] MMU_SRAMB[%d] = %08x (len=%06x)\n", | |
| R[NUM_PC], offset, val, mmu_state.sec[offset].len); | |
| break; | |
| case MMU_FC: | |
| mmu_state.fcode = val; | |
| break; | |
| case MMU_FA: | |
| mmu_state.faddr = val; | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] MMU_FAULT_ADDR = %08x\n", | |
| R[NUM_PC], val); | |
| break; | |
| case MMU_CONF: | |
| mmu_state.conf = val & 0x7; | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] MMU_CONF = %08x\n", | |
| R[NUM_PC], val); | |
| break; | |
| case MMU_VAR: | |
| mmu_state.var = val; | |
| flush_sdce(val); | |
| flush_pdce(val); | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] MMU_VAR = %08x\n", | |
| R[NUM_PC], val); | |
| break; | |
| } | |
| } | |
| t_bool addr_is_rom(uint32 pa) | |
| { | |
| return (pa < BOOT_CODE_SIZE); | |
| } | |
| t_bool addr_is_mem(uint32 pa) | |
| { | |
| return (pa >= PHYS_MEM_BASE && | |
| pa < (PHYS_MEM_BASE + MEM_SIZE)); | |
| } | |
| t_bool addr_is_io(uint32 pa) | |
| { | |
| return ((pa >= IO_BASE && pa < IO_BASE + IO_SIZE) || | |
| (pa >= IOB_BASE && pa < IOB_BASE + IOB_SIZE)); | |
| } | |
| /* | |
| * Raw physical reads and writes. | |
| * | |
| * The WE32100 is a BIG-endian machine, meaning that words are | |
| * arranged in increasing address from most-significant byte to | |
| * least-significant byte. | |
| */ | |
| /* | |
| * Read Word (Physical Address) | |
| */ | |
| uint32 pread_w(uint32 pa) | |
| { | |
| uint32 *m; | |
| uint32 index; | |
| if (pa & 3) { | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] Cannot read physical address. ALIGNMENT ISSUE: %08x\n", | |
| R[NUM_PC], pa); | |
| csr_data |= CSRALGN; | |
| cpu_abort(NORMAL_EXCEPTION, EXTERNAL_MEMORY_FAULT); | |
| } | |
| if (addr_is_io(pa)) { | |
| return io_read(pa, 32); | |
| } | |
| if (addr_is_rom(pa)) { | |
| m = ROM; | |
| index = pa >> 2; | |
| } else if (addr_is_mem(pa)) { | |
| m = RAM; | |
| index = (pa - PHYS_MEM_BASE) >> 2; | |
| } else { | |
| return 0; | |
| } | |
| return m[index]; | |
| } | |
| /* | |
| * Write Word (Physical Address) | |
| */ | |
| void pwrite_w(uint32 pa, uint32 val) | |
| { | |
| if (pa & 3) { | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] Cannot write physical address. ALIGNMENT ISSUE: %08x\n", | |
| R[NUM_PC], pa); | |
| csr_data |= CSRALGN; | |
| cpu_abort(NORMAL_EXCEPTION, EXTERNAL_MEMORY_FAULT); | |
| } | |
| if (addr_is_io(pa)) { | |
| io_write(pa, val, 32); | |
| return; | |
| } | |
| if (addr_is_mem(pa)) { | |
| RAM[(pa - PHYS_MEM_BASE) >> 2] = val; | |
| return; | |
| } | |
| } | |
| /* | |
| * Read Halfword (Physical Address) | |
| */ | |
| uint16 pread_h(uint32 pa) | |
| { | |
| uint32 *m; | |
| uint32 index; | |
| if (pa & 1) { | |
| sim_debug(READ_MSG, &mmu_dev, | |
| "[%08x] Cannot read physical address. ALIGNMENT ISSUE %08x\n", | |
| R[NUM_PC], pa); | |
| csr_data |= CSRALGN; | |
| cpu_abort(NORMAL_EXCEPTION, EXTERNAL_MEMORY_FAULT); | |
| } | |
| if (addr_is_io(pa)) { | |
| return (uint16) io_read(pa, 16); | |
| } | |
| if (addr_is_rom(pa)) { | |
| m = ROM; | |
| index = pa >> 2; | |
| } else if (addr_is_mem(pa)) { | |
| m = RAM; | |
| index = (pa - PHYS_MEM_BASE) >> 2; | |
| } else { | |
| return 0; | |
| } | |
| if (pa & 2) { | |
| return m[index] & HALF_MASK; | |
| } else { | |
| return (m[index] >> 16) & HALF_MASK; | |
| } | |
| } | |
| /* | |
| * Write Halfword (Physical Address) | |
| */ | |
| void pwrite_h(uint32 pa, uint16 val) | |
| { | |
| uint32 *m; | |
| uint32 index; | |
| uint32 wval = (uint32)val; | |
| if (pa & 1) { | |
| sim_debug(WRITE_MSG, &mmu_dev, | |
| "[%08x] Cannot write physical address %08x, ALIGNMENT ISSUE\n", | |
| R[NUM_PC], pa); | |
| csr_data |= CSRALGN; | |
| cpu_abort(NORMAL_EXCEPTION, EXTERNAL_MEMORY_FAULT); | |
| } | |
| if (addr_is_io(pa)) { | |
| io_write(pa, val, 16); | |
| return; | |
| } | |
| if (addr_is_mem(pa)) { | |
| m = RAM; | |
| index = (pa - PHYS_MEM_BASE) >> 2; | |
| } else { | |
| return; | |
| } | |
| if (pa & 2) { | |
| m[index] = (m[index] & ~HALF_MASK) | wval; | |
| } else { | |
| m[index] = (m[index] & HALF_MASK) | (wval << 16); | |
| } | |
| } | |
| /* | |
| * Read Byte (Physical Address) | |
| */ | |
| uint8 pread_b(uint32 pa) | |
| { | |
| uint32 data; | |
| int32 sc = (~(pa & 3) << 3) & 0x1f; | |
| if (addr_is_io(pa)) { | |
| return (uint8)(io_read(pa, 8)); | |
| } | |
| if (addr_is_rom(pa)) { | |
| data = ROM[pa >> 2]; | |
| } else if (addr_is_mem(pa)) { | |
| data = RAM[(pa - PHYS_MEM_BASE) >> 2]; | |
| } else { | |
| return 0; | |
| } | |
| return (data >> sc) & BYTE_MASK; | |
| } | |
| /* | |
| * Write Byte (Physical Address) | |
| */ | |
| void pwrite_b(uint32 pa, uint8 val) | |
| { | |
| uint32 *m; | |
| int32 index; | |
| int32 sc = (~(pa & 3) << 3) & 0x1f; | |
| uint32 mask = 0xffu << sc; | |
| if (addr_is_io(pa)) { | |
| io_write(pa, val, 8); | |
| return; | |
| } | |
| if (addr_is_mem(pa)) { | |
| m = RAM; | |
| index = (pa - PHYS_MEM_BASE) >> 2; | |
| m[index] = (m[index] & ~mask) | (uint32) (val << sc); | |
| return; | |
| } | |
| } | |
| /* Helper functions for MMU decode. */ | |
| /* | |
| * Get the Segment Descriptor for a virtual address on a cache miss. | |
| * | |
| * Returns SCPE_OK on success, SCPE_NXM on failure. | |
| * | |
| * If SCPE_NXM is returned, a failure code and fault address will be | |
| * set in the appropriate registers. | |
| * | |
| * As always, the flag 'fc' may be set to FALSE to avoid certain | |
| * typses of fault checking. | |
| * | |
| */ | |
| t_stat mmu_get_sd(uint32 va, uint8 r_acc, t_bool fc, | |
| uint32 *sd0, uint32 *sd1) | |
| { | |
| /* We immediately do some bounds checking (fc flag is not checked | |
| * because this is a fatal error) */ | |
| if (SSL(va) > SRAMB_LEN(va)) { | |
| MMU_FAULT(MMU_F_SDTLEN); | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] SDT Length Fault. sramb_len=%x ssl=%x va=%08x\n", | |
| R[NUM_PC], SRAMB_LEN(va), SSL(va), va); | |
| return SCPE_NXM; | |
| } | |
| /* sd0 contains the segment descriptor, sd1 contains a pointer to | |
| the PDT or Segment */ | |
| *sd0 = pread_w(SD_ADDR(va)); | |
| *sd1 = pread_w(SD_ADDR(va) + 4); | |
| if (!SD_VALID(*sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Invalid Segment Descriptor. va=%08x sd0=%08x\n", | |
| R[NUM_PC], va, *sd0); | |
| MMU_FAULT(MMU_F_INV_SD); | |
| return SCPE_NXM; | |
| } | |
| /* TODO: Handle indirect lookups. */ | |
| if (SD_INDIRECT(*sd0)) { | |
| stop_reason = STOP_MMU; | |
| return SCPE_NXM; | |
| } | |
| /* If the segment descriptor isn't present, we need to | |
| * fail out */ | |
| if (!SD_PRESENT(*sd0)) { | |
| if (SD_CONTIG(*sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Segment Not Present. va=%08x", | |
| R[NUM_PC], va); | |
| MMU_FAULT(MMU_F_SEG_NOT_PRES); | |
| return SCPE_NXM; | |
| } else { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] PDT Not Present. va=%08x", | |
| R[NUM_PC], va); | |
| MMU_FAULT(MMU_F_PDT_NOT_PRES); | |
| return SCPE_NXM; | |
| } | |
| } | |
| if (SHOULD_CACHE_SD(*sd0)) { | |
| put_sdce(va, *sd0, *sd1); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* | |
| * Load a page descriptor from memory | |
| */ | |
| t_stat mmu_get_pd(uint32 va, uint8 r_acc, t_bool fc, | |
| uint32 sd0, uint32 sd1, | |
| uint32 *pd, uint8 *pd_acc) | |
| { | |
| uint32 pd_addr; | |
| /* Where do we find the page descriptor? */ | |
| pd_addr = SD_SEG_ADDR(sd1) + (PSL(va) * 4); | |
| /* Bounds checking on length */ | |
| if ((PSL(va) * 4) > MAX_OFFSET(sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] PDT Length Fault. " | |
| "PDT Offset=%08x Max Offset=%08x va=%08x\n", | |
| R[NUM_PC], (PSL(va) * 4), | |
| MAX_OFFSET(sd0), va); | |
| MMU_FAULT(MMU_F_PDTLEN); | |
| return SCPE_NXM; | |
| } | |
| *pd = pread_w(pd_addr); | |
| /* Copy the access flags from the SD */ | |
| *pd_acc = SD_ACC(sd0); | |
| /* Cache it */ | |
| if (SHOULD_CACHE_PD(*pd)) { | |
| put_pdce(va, sd0, *pd); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* | |
| * Decode an address from a contiguous segment. | |
| */ | |
| t_stat mmu_decode_contig(uint32 va, uint8 r_acc, | |
| uint32 sd0, uint32 sd1, | |
| t_bool fc, uint32 *pa) | |
| { | |
| if (fc) { | |
| /* Verify permissions */ | |
| if (mmu_check_perm(SD_ACC(sd0), r_acc) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] SEGMENT: NO ACCESS TO MEMORY AT %08x.\n" | |
| "\t\tcpu_cm=%d acc_req=%x sd_acc=%02x\n", | |
| R[NUM_PC], va, CPU_CM, r_acc, SD_ACC(sd0)); | |
| MMU_FAULT(MMU_F_ACC); | |
| return SCPE_NXM; | |
| } | |
| } | |
| /* Do max segment offset check outside any 'fc' checks because we | |
| want this to fail even if fc is false. */ | |
| if (SOT(va) > MAX_OFFSET(sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] CONTIGUOUS: Segment Offset Fault. " | |
| "sd0=%08x SOT=%08x len=%08x va=%08x\n", | |
| R[NUM_PC], sd0, SOT(va), | |
| (SD_MAX_OFF(sd0) * 8), va); | |
| MMU_FAULT(MMU_F_SEG_OFFSET); | |
| return SCPE_NXM; | |
| } | |
| /* TODO: It's possible to have BOTH a segment offset violation AND | |
| an access violation. We need to cover that instance. */ | |
| if (fc) { | |
| /* Update R and M bits if configured */ | |
| if (SHOULD_UPDATE_SD_R_BIT(sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Updating R bit in SD\n", | |
| R[NUM_PC]); | |
| mmu_update_sd(va, SD_R_MASK); | |
| } | |
| if (SHOULD_UPDATE_SD_M_BIT(sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Updating M bit in SD\n", | |
| R[NUM_PC]); | |
| mmu_update_sd(va, SD_M_MASK); | |
| } | |
| /* Generate object trap if needed */ | |
| if (SD_TRAP(sd0)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Object Trap. va=%08x", | |
| R[NUM_PC], va); | |
| MMU_FAULT(MMU_F_OTRAP); | |
| return SCPE_NXM; | |
| } | |
| } | |
| *pa = SD_SEG_ADDR(sd1) + SOT(va); | |
| return SCPE_OK; | |
| } | |
| t_stat mmu_decode_paged(uint32 va, uint8 r_acc, t_bool fc, | |
| uint32 sd1, uint32 pd, | |
| uint8 pd_acc, uint32 *pa) | |
| { | |
| if (fc && mmu_check_perm(pd_acc, r_acc) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] PAGE: NO ACCESS TO MEMORY AT %08x.\n" | |
| "\t\tcpu_cm=%d r_acc=%x pd_acc=%02x\n" | |
| "\t\tpd=%08x psw=%08x\n", | |
| R[NUM_PC], va, CPU_CM, r_acc, pd_acc, | |
| pd, R[NUM_PSW]); | |
| MMU_FAULT(MMU_F_ACC); | |
| return SCPE_NXM; | |
| } | |
| /* If the PD is not marked present, fail */ | |
| if (!PD_PRESENT(pd)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Page Not Present. " | |
| "pd=%08x r_acc=%x va=%08x\n", | |
| R[NUM_PC], pd, r_acc, va); | |
| MMU_FAULT(MMU_F_PAGE_NOT_PRES); | |
| return SCPE_NXM; | |
| } | |
| if (fc) { | |
| /* If this is a write or interlocked read access, and | |
| the 'W' bit is set, trigger a write fault */ | |
| if ((r_acc == ACC_W || r_acc == ACC_IR) && PD_WFAULT(pd)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Page Write Fault. va=%08x\n", | |
| R[NUM_PC], va); | |
| MMU_FAULT(MMU_F_PW); | |
| return SCPE_NXM; | |
| } | |
| /* If this is a write, modify the M bit */ | |
| if (SHOULD_UPDATE_PD_M_BIT(pd)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Updating M bit in PD\n", | |
| R[NUM_PC]); | |
| mmu_update_pd(va, PD_LOC(sd1, va), PD_M_MASK); | |
| } | |
| /* Modify the R bit and write it back */ | |
| if (SHOULD_UPDATE_PD_R_BIT(pd)) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Updating R bit in PD\n", | |
| R[NUM_PC]); | |
| mmu_update_pd(va, PD_LOC(sd1, va), PD_R_MASK); | |
| } | |
| } | |
| *pa = PD_ADDR(pd) + POT(va); | |
| return SCPE_OK; | |
| } | |
| /* | |
| * Translate a virtual address into a physical address. | |
| * | |
| * If "fc" is false, this function will bypass: | |
| * | |
| * - Access flag checks | |
| * - Cache insertion | |
| * - Setting MMU fault registers | |
| * - Modifying segment and page descriptor bits | |
| */ | |
| t_stat mmu_decode_va(uint32 va, uint8 r_acc, t_bool fc, uint32 *pa) | |
| { | |
| uint32 sd0, sd1, pd; | |
| uint8 pd_acc; | |
| t_stat sd_cached, pd_cached; | |
| if (!mmu_state.enabled) { | |
| *pa = va; | |
| return SCPE_OK; | |
| } | |
| /* We must check both caches first to determine what kind of miss | |
| processing to do. */ | |
| sd_cached = get_sdce(va, &sd0, &sd1); | |
| pd_cached = get_pdce(va, &pd, &pd_acc); | |
| /* Now, potentially, do miss processing */ | |
| if (sd_cached != SCPE_OK && pd_cached != SCPE_OK) { | |
| /* Full miss processing. We have to load both the SD and PD | |
| * from main memory, and potentially cache them. */ | |
| if (mmu_get_sd(va, r_acc, fc, &sd0, &sd1) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Could not get SD (full miss). r_acc=%d, fc=%d, va=%08x\n", | |
| R[NUM_PC], r_acc, fc, va); | |
| return SCPE_NXM; | |
| } | |
| if (!SD_CONTIG(sd0)) { | |
| if (mmu_get_pd(va, r_acc, fc, sd0, sd1, &pd, &pd_acc) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Could not get PD (full miss). r_acc=%d, fc=%d, va=%08x\n", | |
| R[NUM_PC], r_acc, fc, va); | |
| return SCPE_NXM; | |
| } | |
| } | |
| } else if (sd_cached == SCPE_OK && pd_cached != SCPE_OK && !SD_CONTIG(sd0)) { | |
| /* Partial miss processing - SDC hit and PDC miss - but only | |
| * if segment is paged. */ | |
| if (mmu_get_pd(va, r_acc, fc, sd0, sd1, &pd, &pd_acc) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Could not get PD (partial miss). r_acc=%d, fc=%d, va=%08x\n", | |
| R[NUM_PC], r_acc, fc, va); | |
| return SCPE_NXM; | |
| } | |
| } else if (sd_cached != SCPE_OK && pd_cached == SCPE_OK) { | |
| /* Partial miss processing - SDC miss and PDC hit. This is | |
| * always paged translation */ | |
| /* First we must bring the SD into cache so that the SD | |
| * R & M bits may be updated, if needed. */ | |
| if (mmu_get_sd(va, r_acc, fc, &sd0, &sd1) != SCPE_OK) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Could not get SD (partial miss). r_acc=%d, fc=%d, va=%08x\n", | |
| R[NUM_PC], r_acc, fc, va); | |
| return SCPE_NXM; | |
| } | |
| /* If the 'L' bit is set in the page descriptor, we need to | |
| * do some bounds checking */ | |
| if (PD_LAST(pd)) { | |
| if ((PD_ADDR(pd) + POT(va)) > (SD_SEG_ADDR(sd1) + MAX_OFFSET(sd0))) { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] PAGED: Segment Offset Fault.\n", | |
| R[NUM_PC]); | |
| MMU_FAULT(MMU_F_SEG_OFFSET); | |
| return SCPE_NXM; | |
| } | |
| } | |
| return mmu_decode_paged(va, r_acc, fc, sd1, pd, pd_acc, pa); | |
| } | |
| if (SD_CONTIG(sd0)) { | |
| return mmu_decode_contig(va, r_acc, sd0, sd1, fc, pa); | |
| } else { | |
| return mmu_decode_paged(va, r_acc, fc, sd1, pd, pd_acc, pa); | |
| } | |
| } | |
| t_stat examine(uint32 va, uint8 *val) { | |
| uint32 pa; | |
| t_stat succ; | |
| succ = mmu_decode_va(va, 0, FALSE, &pa); | |
| if (succ == SCPE_OK) { | |
| if (addr_is_rom(pa) || addr_is_io(pa) || addr_is_mem(pa)) { | |
| *val = pread_b(pa); | |
| return SCPE_OK; | |
| } else { | |
| *val = 0; | |
| return SCPE_NXM; | |
| } | |
| } else { | |
| *val = 0; | |
| return succ; | |
| } | |
| } | |
| t_stat deposit(uint32 va, uint8 val) { | |
| uint32 pa; | |
| t_stat succ; | |
| succ = mmu_decode_va(va, 0, FALSE, &pa); | |
| if (succ == SCPE_OK) { | |
| if (addr_is_mem(pa) || addr_is_io(pa)) { | |
| pwrite_b(pa, val); | |
| return SCPE_OK; | |
| } else { | |
| return SCPE_NXM; | |
| } | |
| } else { | |
| return succ; | |
| } | |
| } | |
| t_stat read_operand(uint32 va, uint8 *val) { | |
| uint32 pa; | |
| t_stat succ; | |
| succ = mmu_decode_va(va, ACC_OF, TRUE, &pa); | |
| if (succ == SCPE_OK) { | |
| *val = pread_b(pa); | |
| } else { | |
| *val = 0; | |
| } | |
| return succ; | |
| } | |
| uint32 mmu_xlate_addr(uint32 va, uint8 r_acc) | |
| { | |
| uint32 pa; | |
| t_stat succ; | |
| succ = mmu_decode_va(va, r_acc, TRUE, &pa); | |
| if (succ == SCPE_OK) { | |
| mmu_state.var = va; | |
| return pa; | |
| } else { | |
| cpu_abort(NORMAL_EXCEPTION, EXTERNAL_MEMORY_FAULT); | |
| return 0; | |
| } | |
| } | |
| void mmu_enable() | |
| { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Enabling MMU.\n", | |
| R[NUM_PC]); | |
| mmu_state.enabled = TRUE; | |
| } | |
| void mmu_disable() | |
| { | |
| sim_debug(EXECUTE_MSG, &mmu_dev, | |
| "[%08x] Disabling MMU.\n", | |
| R[NUM_PC]); | |
| mmu_state.enabled = FALSE; | |
| } | |
| /* | |
| * MMU Virtual Read and Write Functions | |
| */ | |
| uint8 read_b(uint32 va, uint8 r_acc) | |
| { | |
| return pread_b(mmu_xlate_addr(va, r_acc)); | |
| } | |
| uint16 read_h(uint32 va, uint8 r_acc) | |
| { | |
| return pread_h(mmu_xlate_addr(va, r_acc)); | |
| } | |
| uint32 read_w(uint32 va, uint8 r_acc) | |
| { | |
| return pread_w(mmu_xlate_addr(va, r_acc)); | |
| } | |
| void write_b(uint32 va, uint8 val) | |
| { | |
| pwrite_b(mmu_xlate_addr(va, ACC_W), val); | |
| } | |
| void write_h(uint32 va, uint16 val) | |
| { | |
| pwrite_h(mmu_xlate_addr(va, ACC_W), val); | |
| } | |
| void write_w(uint32 va, uint32 val) | |
| { | |
| pwrite_w(mmu_xlate_addr(va, ACC_W), val); | |
| } |