| /* b5500_mt.c: Burrioughs 5500 Magnetic tape controller | |
| Copyright (c) 2016, Richard Cornwell | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| RICHARD CORNWELL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Magnetic tapes are represented as a series of variable records | |
| of the form: | |
| 32b byte count | |
| byte 0 | |
| byte 1 | |
| : | |
| byte n-2 | |
| byte n-1 | |
| 32b byte count | |
| If the byte count is odd, the record is padded with an extra byte | |
| of junk. File marks are represented by a byte count of 0. | |
| */ | |
| #include "b5500_defs.h" | |
| #include "sim_tape.h" | |
| #if (NUM_DEVS_MT > 0) | |
| #define BUFFSIZE 10240 | |
| #define UNIT_MT UNIT_ATTABLE | UNIT_DISABLE | UNIT_ROABLE | |
| #define HT 500 /* Time per char high density */ | |
| /* in u3 is device address */ | |
| /* in u4 is current buffer position */ | |
| /* in u5 Bits 30-16 of W */ | |
| #define URCSTA_SKIP 000017 /* Skip mask */ | |
| #define URCSTA_SINGLE 000020 /* Single space skip. */ | |
| #define URCSTA_DOUBLE 000040 /* Double space skip */ | |
| #define URCSTA_READ 000400 /* Read flag */ | |
| #define URCSTA_WC 001000 /* Use word count */ | |
| #define URCSTA_DIRECT 002000 /* Direction, Long line */ | |
| #define URCSTA_BINARY 004000 /* Binary transfer */ | |
| #define URCSTA_INHIBIT 040000 /* Inhibit transfer to memory */ | |
| #define MT_CHAN 0000003 /* Channel active on */ | |
| #define MT_BIN 0000004 /* Binary/BCD */ | |
| #define MT_BACK 0000010 /* Backwards */ | |
| #define MT_CMD 0000070 /* Command to tape drive */ | |
| #define MT_INT 0000010 /* Interrogate */ | |
| #define MT_RD 0000020 /* Reading */ | |
| #define MT_RDBK 0000030 /* Reading Backwards */ | |
| #define MT_WR 0000040 /* Writing */ | |
| #define MT_REW 0000050 /* Rewind */ | |
| #define MT_FSR 0000060 /* Space Forward */ | |
| #define MT_BSR 0000070 /* Space Backward record */ | |
| #define MT_RDY 0000100 /* Device is ready for command */ | |
| #define MT_IDLE 0000200 /* Tape still in motion */ | |
| #define MT_MARK 0001000 /* Hit tape mark */ | |
| #define MT_EOT 0002000 /* At End Of Tape */ | |
| #define MT_BOT 0004000 /* At Beginning Of Tape */ | |
| #define MT_EOR 0010000 /* Set EOR on next record */ | |
| #define MT_BSY 0020000 /* Tape busy after operation */ | |
| #define MT_LOADED 0040000 /* Tape loaded, return ready */ | |
| #define BUF_EMPTY(u) (u->hwmark == 0xFFFFFFFF) | |
| #define CLR_BUF(u) u->hwmark = 0xFFFFFFFF | |
| t_stat mt_srv(UNIT *); | |
| t_stat mt_attach(UNIT *, CONST char *); | |
| t_stat mt_detach(UNIT *); | |
| t_stat mt_reset(DEVICE *); | |
| t_stat mt_help(FILE *, DEVICE *, UNIT *, int32, const char *); | |
| const char *mt_description(DEVICE *dptr); | |
| /* Channel level activity */ | |
| uint8 mt_chan[NUM_CHAN]; | |
| uint16 mt_busy = 0; /* Busy bits */ | |
| /* One buffer per channel */ | |
| uint8 mt_buffer[NUM_CHAN][BUFFSIZE]; | |
| UNIT mt_unit[] = { | |
| /* Controller 1 */ | |
| #if (NUM_DEVS_MT > 0) | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 0 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 1 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 2 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 3 */ | |
| #if (NUM_DEVS_MT > 3) | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 4 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 5 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 6 */ | |
| {UDATA(&mt_srv, UNIT_MT, 0), 0}, /* 7 */ | |
| #if (NUM_DEVS_MT > 7) | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 8 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 9 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 10 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 11 */ | |
| #if (NUM_DEVS_MT > 11) | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 12 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 13 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 14 */ | |
| {UDATA(&mt_srv, UNIT_MT|UNIT_DIS, 0), 0}, /* 15 */ | |
| #endif | |
| #endif | |
| #endif | |
| #endif | |
| }; | |
| MTAB mt_mod[] = { | |
| {MTUF_WLK, 0, "write enabled", "WRITEENABLED", NULL, NULL, NULL, | |
| "Write ring in place"}, | |
| {MTUF_WLK, MTUF_WLK, "write locked", "LOCKED", NULL, NULL, NULL, | |
| "no Write ring in place"}, | |
| {MTAB_XTD | MTAB_VUN, 0, "FORMAT", "FORMAT", | |
| &sim_tape_set_fmt, &sim_tape_show_fmt, NULL, | |
| "Set/Display tape format (SIMH, E11, TPC, P7B)" }, | |
| {MTAB_XTD | MTAB_VUN, 0, "LENGTH", "LENGTH", | |
| &sim_tape_set_capac, &sim_tape_show_capac, NULL, | |
| "Set unit n capacity to arg MB (0 = unlimited)" }, | |
| {MTAB_XTD | MTAB_VUN, 0, "DENSITY", "DENSITY", | |
| NULL, &sim_tape_show_dens, NULL}, | |
| {0} | |
| }; | |
| DEVICE mt_dev = { | |
| "MT", mt_unit, NULL, mt_mod, | |
| NUM_DEVS_MT, 8, 15, 1, 8, 8, | |
| NULL, NULL, &mt_reset, NULL, &mt_attach, &mt_detach, | |
| NULL, DEV_DISABLE | DEV_DEBUG | DEV_TAPE, 0, dev_debug, | |
| NULL, NULL, &mt_help, NULL, NULL, | |
| &mt_description | |
| }; | |
| /* Start off a mag tape command */ | |
| t_stat | |
| mt_cmd(uint16 cmd, uint16 dev, uint8 chan, uint16 *wc) | |
| { | |
| UNIT *uptr; | |
| int unit = dev >> 1; | |
| /* Make sure valid drive number */ | |
| if (unit > (NUM_DEVS_MT - 1) || unit < 0) | |
| return SCPE_NODEV; | |
| uptr = &mt_unit[unit]; | |
| /* If unit disabled return error */ | |
| if (uptr->flags & UNIT_DIS) | |
| return SCPE_NODEV; | |
| if ((uptr->flags & UNIT_ATT) == 0) | |
| return SCPE_UNATT; | |
| /* Not there until loading done */ | |
| if ((uptr->u5 & MT_LOADED)) | |
| return SCPE_UNATT; | |
| /* Check if drive is ready to recieve a command */ | |
| if ((uptr->u5 & MT_BSY) != 0) | |
| return SCPE_BUSY; | |
| /* Determine actual command */ | |
| uptr->u5 &= ~(MT_RDY|MT_CHAN|MT_CMD|MT_BIN); | |
| uptr->u5 |= chan; | |
| if (cmd & URCSTA_BINARY) | |
| uptr->u5 |= MT_BIN; | |
| if (cmd & URCSTA_READ) { | |
| if ((cmd & URCSTA_WC) && *wc == 0) | |
| uptr->u5 |= MT_FSR; | |
| else | |
| uptr->u5 |= MT_RD; | |
| } else { | |
| /* Erase gap not supported on sim, treat as | |
| write of null record */ | |
| if ((cmd & URCSTA_WC) && *wc == 0) | |
| uptr->u5 |= MT_INT; | |
| else | |
| uptr->u5 |= MT_WR; | |
| } | |
| *wc = 0; /* So no overide occurs */ | |
| /* Convert command to correct type */ | |
| if (cmd & URCSTA_DIRECT) | |
| uptr->u5 |= MT_BACK; | |
| uptr->u6 = 0; | |
| CLR_BUF(uptr); | |
| sim_debug(DEBUG_CMD, &mt_dev, "Command %d %o %o\n", unit, uptr->u5, cmd); | |
| if ((uptr->u5 & MT_IDLE) == 0) { | |
| sim_activate(uptr,50000); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Map simH errors into machine errors */ | |
| t_stat mt_error(UNIT * uptr, int chan, t_stat r, DEVICE * dptr) | |
| { | |
| switch (r) { | |
| case MTSE_OK: /* no error */ | |
| sim_debug(DEBUG_EXP, dptr, "OK "); | |
| break; | |
| case MTSE_EOM: /* end of medium */ | |
| sim_debug(DEBUG_EXP, dptr, "EOT "); | |
| if (uptr->u5 & MT_BOT) { | |
| chan_set_blank(chan); | |
| } else { | |
| uptr->u5 &= ~MT_BOT; | |
| uptr->u5 |= MT_EOT; | |
| chan_set_eot(chan); | |
| } | |
| break; | |
| case MTSE_TMK: /* tape mark */ | |
| sim_debug(DEBUG_EXP, dptr, "MARK "); | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| chan_set_eof(chan); | |
| break; | |
| case MTSE_WRP: /* write protected */ | |
| sim_debug(DEBUG_EXP, dptr, "WriteLocked "); | |
| chan_set_wrp(chan); | |
| break; | |
| case MTSE_INVRL: /* invalid rec lnt */ | |
| case MTSE_IOERR: /* IO error */ | |
| case MTSE_FMT: /* invalid format */ | |
| case MTSE_RECE: /* error in record */ | |
| chan_set_error(chan); /* Force redundency error */ | |
| sim_debug(DEBUG_EXP, dptr, "ERROR %d ", r); | |
| break; | |
| case MTSE_BOT: /* beginning of tape */ | |
| uptr->u5 &= ~MT_EOT; | |
| uptr->u5 |= MT_BOT; | |
| chan_set_bot(chan); /* Set flag */ | |
| sim_debug(DEBUG_EXP, dptr, "BOT "); | |
| break; | |
| case MTSE_UNATT: /* unattached */ | |
| default: | |
| sim_debug(DEBUG_EXP, dptr, "%d ", r); | |
| } | |
| uptr->u5 &= ~(MT_CMD|MT_BIN); | |
| uptr->u5 |= MT_RDY|MT_IDLE; | |
| chan_set_end(chan); | |
| return SCPE_OK; | |
| } | |
| /* Handle processing of tape requests. */ | |
| t_stat mt_srv(UNIT * uptr) | |
| { | |
| int chan = uptr->u5 & MT_CHAN; | |
| int unit = uptr - mt_unit; | |
| int cmd = uptr->u5 & MT_CMD; | |
| DEVICE *dptr = find_dev_from_unit(uptr); | |
| t_mtrlnt reclen; | |
| t_stat r = SCPE_ARG; /* Force error if not set */ | |
| uint8 ch; | |
| int mode; | |
| t_mtrlnt loc; | |
| /* Simulate tape load delay */ | |
| if (uptr->u5 & MT_LOADED) { | |
| uptr->u5 &= ~MT_LOADED; | |
| uptr->u5 |= MT_BSY|MT_RDY; | |
| sim_debug(DEBUG_DETAIL, dptr, "Unit=%d Loaded\n", unit); | |
| sim_activate(uptr, 50000); | |
| return SCPE_OK; | |
| } | |
| if (uptr->u5 & MT_BSY) { | |
| uptr->u5 &= ~MT_BSY; | |
| sim_debug(DEBUG_DETAIL, dptr, "Unit=%d Online\n", unit); | |
| iostatus |= 1 << (uptr - mt_unit); | |
| if (uptr->u5 & MT_IDLE) | |
| sim_activate(uptr, 50000); | |
| return SCPE_OK; | |
| } | |
| if (uptr->u5 & MT_IDLE) { | |
| uptr->u5 &= ~MT_IDLE; | |
| if (uptr->u5 & MT_RDY) { | |
| sim_debug(DEBUG_DETAIL, dptr, "Unit=%d idling\n", unit); | |
| return SCPE_OK; | |
| } | |
| sim_debug(DEBUG_DETAIL, dptr, "Unit=%d start %02o\n", unit, cmd); | |
| } | |
| switch (cmd) { | |
| /* Handle interrogate */ | |
| case MT_INT: | |
| if (sim_tape_wrp(uptr)) | |
| chan_set_wrp(chan); | |
| uptr->u5 &= ~(MT_CMD|MT_BIN); | |
| uptr->u5 |= MT_RDY; | |
| chan_set_end(chan); | |
| sim_debug(DEBUG_DETAIL, dptr, "Status\n"); | |
| return SCPE_OK; | |
| case MT_RD: /* Read */ | |
| /* If at end of record, fill buffer */ | |
| if (BUF_EMPTY(uptr)) { | |
| sim_debug(DEBUG_DETAIL, dptr, "Read unit=%d %s ", unit, | |
| (uptr->u5 & MT_BIN)? "bin": "bcd"); | |
| if (sim_tape_eot(uptr)) { | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_EOM, dptr); | |
| } | |
| r = sim_tape_rdrecf(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE); | |
| if (r != MTSE_OK) { | |
| if (r == MTSE_TMK) { | |
| sim_debug(DEBUG_DETAIL, dptr, "TM\n"); | |
| ch = 017; | |
| (void)chan_write_char(chan, &ch, 1); | |
| sim_activate(uptr, 4000); | |
| } else { | |
| sim_debug(DEBUG_DETAIL, dptr, "r=%d\n", r); | |
| sim_activate(uptr, 5000); | |
| } | |
| return mt_error(uptr, chan, r, dptr); | |
| } else { | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| uptr->hwmark = reclen; | |
| } | |
| sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark); | |
| uptr->u6 = 0; | |
| if ((uptr->u5 & MT_BIN) == 0) | |
| mode = 0100; | |
| else | |
| mode = 0; | |
| for (loc = 0; loc < reclen; loc++) { | |
| ch = mt_buffer[chan][loc] & 0177; | |
| if (((parity_table[ch & 077]) ^ (ch & 0100) ^ mode) == 0) { | |
| chan_set_error(chan); | |
| break; | |
| } | |
| } | |
| } | |
| ch = mt_buffer[chan][uptr->u6++] & 0177; | |
| /* 00 characters are not transfered in BCD mode */ | |
| if (ch == 0) { | |
| if (((uint32)uptr->u6) >= uptr->hwmark) { | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| } else { | |
| sim_activate(uptr, HT); | |
| return SCPE_OK; | |
| } | |
| } | |
| if (chan_write_char(chan, &ch, | |
| (((uint32)uptr->u6) >= uptr->hwmark) ? 1 : 0)) { | |
| sim_debug(DEBUG_DATA, dptr, "Read unit=%d %d EOR\n", unit, | |
| uptr->hwmark-uptr->u6); | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| } else { | |
| sim_debug(DEBUG_DATA, dptr, "Read data unit=%d %d %03o\n", | |
| unit, uptr->u6, ch); | |
| sim_activate(uptr, HT); | |
| } | |
| return SCPE_OK; | |
| case MT_RDBK: /* Read Backword */ | |
| /* If at end of record, fill buffer */ | |
| if (BUF_EMPTY(uptr)) { | |
| sim_debug(DEBUG_DETAIL, dptr, "Read back unit=%d %s ", unit, | |
| (uptr->u5 & MT_BIN)? "bin": "bcd"); | |
| if (sim_tape_bot(uptr)) { | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_BOT, dptr); | |
| } | |
| r = sim_tape_rdrecr(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE); | |
| if (r != MTSE_OK) { | |
| if (r == MTSE_TMK) { | |
| sim_debug(DEBUG_DETAIL, dptr, "TM\n"); | |
| ch = 017; | |
| (void)chan_write_char(chan, &ch, 1); | |
| sim_activate(uptr, 4000); | |
| } else { | |
| uptr->u5 |= MT_BSY; | |
| sim_debug(DEBUG_DETAIL, dptr, "r=%d\n", r); | |
| sim_activate(uptr, 100); | |
| } | |
| return mt_error(uptr, chan, r, dptr); | |
| } else { | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| uptr->hwmark = reclen; | |
| } | |
| sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark); | |
| uptr->u6 = uptr->hwmark; | |
| if ((uptr->u5 & MT_BIN) == 0) | |
| mode = 0100; | |
| else | |
| mode = 0; | |
| for (loc = 0; loc < reclen; loc++) { | |
| ch = mt_buffer[chan][loc] & 0177; | |
| if (((parity_table[ch & 077]) ^ (ch & 0100) ^ mode) == 0) { | |
| chan_set_error(chan); | |
| break; | |
| } | |
| } | |
| } | |
| ch = mt_buffer[chan][--uptr->u6] & 0177; | |
| /* 00 characters are not transfered in BCD mode */ | |
| if (ch == 0) { | |
| if (uptr->u6 <= 0) { | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| } else { | |
| sim_activate(uptr, HT); | |
| return SCPE_OK; | |
| } | |
| } | |
| if (chan_write_char(chan, &ch, (uptr->u6 > 0) ? 0 : 1)) { | |
| sim_debug(DEBUG_DATA, dptr, "Read back unit=%d %d EOR\n", | |
| unit, uptr->hwmark-uptr->u6); | |
| sim_activate(uptr, 100); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| } else { | |
| sim_debug(DEBUG_DATA, dptr, "Read back data unit=%d %d %03o\n", | |
| unit, uptr->u6, ch); | |
| sim_activate(uptr, HT); | |
| } | |
| return SCPE_OK; | |
| case MT_WR: /* Write */ | |
| /* Check if write protected */ | |
| if (uptr->u6 == 0 && sim_tape_wrp(uptr)) { | |
| sim_activate(uptr, 100); | |
| return mt_error(uptr, chan, MTSE_WRP, dptr); | |
| } | |
| if (chan_read_char(chan, &ch, | |
| (uptr->u6 > BUFFSIZE) ? 1 : 0)) { | |
| reclen = uptr->u6; | |
| /* If no transfer, then either erase */ | |
| if (reclen == 0) { | |
| sim_debug(DEBUG_DETAIL, dptr, "Erase\n"); | |
| r = MTSE_OK; | |
| } else if ((reclen == 1) && (cmd & MT_BIN) == 0 && | |
| (mt_buffer[chan][0] == 017)) { | |
| /* Check if write rtape mark */ | |
| sim_debug(DEBUG_DETAIL, dptr, "Write Mark unit=%d\n", unit); | |
| r = sim_tape_wrtmk(uptr); | |
| } else { | |
| sim_debug(DEBUG_DETAIL, dptr, | |
| "Write unit=%d Block %d %s chars\n", unit, reclen, | |
| (uptr->u5 & MT_BIN)? "bin": "bcd"); | |
| r = sim_tape_wrrecf(uptr, &mt_buffer[chan][0], reclen); | |
| } | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, r, dptr); /* Record errors */ | |
| } else { | |
| /* Copy data to buffer */ | |
| ch &= 077; | |
| ch |= parity_table[ch]; | |
| if ((uptr->u5 & MT_BIN)) | |
| ch ^= 0100; | |
| /* Don't write out even parity zeros */ | |
| if (ch != 0) | |
| mt_buffer[chan][uptr->u6++] = ch; | |
| sim_debug(DEBUG_DATA, dptr, "Write data unit=%d %d %03o\n", | |
| unit, uptr->u6, ch); | |
| uptr->hwmark = uptr->u6; | |
| } | |
| sim_activate(uptr, HT); | |
| return SCPE_OK; | |
| case MT_FSR: /* Space forward one record */ | |
| if (BUF_EMPTY(uptr)) { | |
| /* If at end of record, fill buffer */ | |
| sim_debug(DEBUG_DETAIL, dptr, "Space unit=%d ", unit); | |
| if (sim_tape_eot(uptr)) { | |
| uptr->u5 &= ~MT_BOT; | |
| sim_debug(DEBUG_DETAIL, dptr, "EOT\n"); | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_EOM, dptr); | |
| } | |
| r = sim_tape_rdrecf(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE); | |
| if (r != MTSE_OK) { | |
| if (r == MTSE_TMK) { | |
| sim_debug(DEBUG_DETAIL, dptr, "TM "); | |
| reclen = 1; | |
| chan_set_eof(chan); | |
| } else { | |
| sim_debug(DEBUG_DETAIL, dptr, "r=%d ", r); | |
| reclen = 10; | |
| } | |
| } | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| uptr->hwmark = reclen; | |
| sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark); | |
| sim_activate(uptr, uptr->hwmark * HT); | |
| return SCPE_OK; | |
| } | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| case MT_BSR: /* Backspace record */ | |
| if (BUF_EMPTY(uptr)) { | |
| /* If at end of record, fill buffer */ | |
| sim_debug(DEBUG_DETAIL, dptr, "backspace unit=%d ", unit); | |
| if (sim_tape_bot(uptr)) { | |
| sim_debug(DEBUG_DETAIL, dptr, "BOT\n"); | |
| sim_activate(uptr, 100); | |
| return mt_error(uptr, chan, MTSE_BOT, dptr); | |
| } | |
| r = sim_tape_rdrecr(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE); | |
| if (r != MTSE_OK) { | |
| if (r == MTSE_TMK) { | |
| sim_debug(DEBUG_DETAIL, dptr, "TM "); | |
| reclen = 1; | |
| chan_set_eof(chan); | |
| } else { | |
| reclen = 10; | |
| sim_debug(DEBUG_DETAIL, dptr, "r=%d ", r); | |
| } | |
| } | |
| uptr->u5 &= ~(MT_BOT|MT_EOT); | |
| uptr->hwmark = reclen; | |
| sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark); | |
| sim_activate(uptr, uptr->hwmark * HT); | |
| return SCPE_OK; | |
| } | |
| sim_activate(uptr, 4000); | |
| return mt_error(uptr, chan, MTSE_OK, dptr); | |
| case MT_REW: /* Rewind */ | |
| sim_debug(DEBUG_DETAIL, dptr, "Rewind unit=%d pos=%d\n", unit, | |
| uptr->pos); | |
| uptr->u5 &= ~(MT_CMD | MT_BIN | MT_IDLE | MT_RDY); | |
| uptr->u5 |= MT_BSY|MT_RDY; | |
| iostatus &= ~(1 << (uptr - mt_unit)); | |
| sim_activate(uptr, (uptr->pos/100) + 100); | |
| r = sim_tape_rewind(uptr); | |
| uptr->u5 &= ~MT_EOT; | |
| uptr->u5 |= MT_BOT; | |
| chan_set_end(chan); | |
| return r; | |
| } | |
| return mt_error(uptr, chan, r, dptr); | |
| } | |
| t_stat | |
| mt_attach(UNIT * uptr, CONST char *file) | |
| { | |
| t_stat r; | |
| if ((r = sim_tape_attach_ex(uptr, file, 0, 0)) != SCPE_OK) | |
| return r; | |
| uptr->u5 |= MT_LOADED|MT_BOT; | |
| sim_activate(uptr, 50000); | |
| return SCPE_OK; | |
| } | |
| t_stat | |
| mt_detach(UNIT * uptr) | |
| { | |
| uptr->u5 = 0; | |
| iostatus &= ~(1 << (uptr - mt_unit)); | |
| return sim_tape_detach(uptr); | |
| } | |
| t_stat | |
| mt_reset(DEVICE *dptr) | |
| { | |
| int i; | |
| /* Scan all devices and enable those that | |
| are loaded. This is to allow tapes that | |
| are mounted prior to boot to be recognized | |
| at later. Also disconnect all devices no | |
| longer connected. */ | |
| for ( i = 0; i < NUM_DEVS_MT; i++) { | |
| mt_unit[i].dynflags = MT_DENS_556 << UNIT_V_DF_TAPE; | |
| if ((mt_unit[i].flags & UNIT_ATT) == 0) | |
| iostatus &= ~(1 << i); | |
| else if (mt_unit[i].u5 & (MT_LOADED|MT_RDY)) { | |
| iostatus |= 1 << i; | |
| mt_unit[i].u5 &= ~(MT_LOADED); | |
| mt_unit[i].u5 |= MT_RDY; | |
| } | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat | |
| mt_help(FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| fprintf (st, "B422/B423 Magnetic tape unit\n\n"); | |
| fprintf (st, "The magnetic tape controller assumes that all tapes are 7 track\n"); | |
| fprintf (st, "with valid parity. Tapes are assumed to be 555.5 characters per\n"); | |
| fprintf (st, "inch. To simulate a standard 2400foot tape, do:\n"); | |
| fprintf (st, " sim> SET MTn LENGTH 15\n\n"); | |
| fprintf (st, "By default only 8 drives are enabled, additional units up to 15 supported.\n"); | |
| fprint_set_help(st, dptr); | |
| fprint_show_help(st, dptr); | |
| return SCPE_OK; | |
| } | |
| const char * | |
| mt_description(DEVICE *dptr) | |
| { | |
| return "B422/B423 Magnetic tape unit"; | |
| } | |
| #endif | |