blob: 1c961875ee8f61703adbe4c138109878c2e6ba69 [file] [log] [blame] [raw]
/* sds_lp.c: SDS 940 line printer simulator
Copyright (c) 2001-2008, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
lpt line printer
24-Nov-08 RMS Fixed loss of carriage control position on space op
19-Jan-07 RMS Added UNIT_TEXT flag
25-Apr-03 RMS Revised for extended file support
*/
#include "sds_defs.h"
#define LPT_V_LN 9
#define LPT_M_LN 07
#define LPT_GETLN(x) (((x) >> LPT_V_LN) & LPT_M_LN)
#define CHP(ch,val) ((val) & (1 << (ch))) /* CCL chan test */
#define SET_XFR 1 /* set xfr */
#define SET_EOR 2 /* print, set eor */
#define SET_SPC 4 /* space */
extern uint32 xfr_req;
extern int32 stop_invins, stop_invdev, stop_inviop;
int32 lpt_spc = 0; /* space instr */
int32 lpt_sta = 0; /* timeout state */
int32 lpt_bptr = 0; /* line buf ptr */
int32 lpt_err = 0; /* error */
int32 lpt_ccl = 1, lpt_ccp = 0; /* cctl lnt, ptr */
int32 lpt_ctime = 10; /* char time */
int32 lpt_ptime = 1000; /* print time */
int32 lpt_stime = 10000; /* space time */
int32 lpt_stopioe = 1; /* stop on err */
char lpt_buf[LPT_WIDTH + 1] = { 0 }; /* line buffer */
uint8 lpt_cct[CCT_LNT] = { 0377 }; /* car ctl tape */
DSPT lpt_tplt[] = { /* template */
{ 1, 0 },
{ 0, 0 }
};
DEVICE lpt_dev;
t_stat lpt_svc (UNIT *uptr);
t_stat lpt_reset (DEVICE *dptr);
t_stat lpt_attach (UNIT *uptr, char *cptr);
t_stat lpt_crctl (UNIT *uptr, int32 ch);
t_stat lpt_space (UNIT *uptr, int32 cnt);
t_stat lpt_status (UNIT *uptr);
t_stat lpt_bufout (UNIT *uptr);
void lpt_end_op (int32 fl);
t_stat lpt (uint32 fnc, uint32 inst, uint32 *dat);
int8 sds_to_ascii(int8 c);
/* LPT data structures
lpt_dev LPT device descriptor
lpt_unit LPT unit descriptor
lpt_reg LPT register list
*/
DIB lpt_dib = { CHAN_W, DEV_LPT, XFR_LPT, lpt_tplt, &lpt };
UNIT lpt_unit = {
UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_TEXT, 0)
};
REG lpt_reg[] = {
{ BRDATA (BUF, lpt_buf, 8, 8, LPT_WIDTH) },
{ DRDATA (BPTR, lpt_bptr, 8), PV_LEFT },
{ FLDATA (XFR, xfr_req, XFR_V_LPT) },
{ FLDATA (ERR, lpt_err, 0) },
{ ORDATA (STA, lpt_sta, 3) },
{ BRDATA (CCT, lpt_cct, 8, 8, CCT_LNT) },
{ DRDATA (CCTP, lpt_ccp, 8), PV_LEFT },
{ DRDATA (CCTL, lpt_ccl, 8), REG_RO + PV_LEFT },
{ ORDATA (SPCINST, lpt_spc, 24) },
{ DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (CTIME, lpt_ctime, 24), REG_NZ + PV_LEFT },
{ DRDATA (PTIME, lpt_ptime, 24), REG_NZ + PV_LEFT },
{ DRDATA (STIME, lpt_stime, 24), REG_NZ + PV_LEFT },
{ FLDATA (STOP_IOE, lpt_stopioe, 0) },
{ NULL }
};
MTAB lpt_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "CHANNEL", "CHANNEL",
&set_chan, &show_chan, NULL },
{ 0 }
};
DEVICE lpt_dev = {
"LPT", &lpt_unit, lpt_reg, lpt_mod,
1, 10, 31, 1, 8, 7,
NULL, NULL, &lpt_reset,
NULL, &lpt_attach, NULL,
&lpt_dib, DEV_DISABLE
};
/* Line printer routine
conn - inst = EOM0, dat = NULL
eom1 - inst = EOM1, dat = NULL
sks - inst = SKS, dat = ptr to result
disc - inst = device number, dat = NULL
wreor - inst = device number, dat = NULL
read - inst = device number, dat = ptr to data
write - inst = device number, dat = ptr to result
The line printer is an asynchronous output device, that is, it
can never set the channel rate error flag.
*/
t_stat lpt (uint32 fnc, uint32 inst, uint32 *dat)
{
int32 i, t, new_ch;
char asc;
switch (fnc) { /* case function */
case IO_CONN: /* connect */
new_ch = I_GETEOCH (inst); /* get new chan */
if (new_ch != lpt_dib.chan) /* wrong chan? */
return SCPE_IERR;
for (i = 0; i < LPT_WIDTH; i++) /* clr buffer */
lpt_buf[i] = 0;
lpt_bptr = 0; /* clr buf ptr */
lpt_err = 0; /* err = 0 */
xfr_req = xfr_req & ~XFR_LPT; /* clr xfr flag */
lpt_sta = lpt_sta | SET_XFR; /* need xfr */
sim_activate (&lpt_unit, lpt_ctime); /* start timer */
break;
case IO_EOM1: /* EOM mode 1 */
new_ch = I_GETEOCH (inst); /* get new chan */
if (new_ch != lpt_dib.chan) /* wrong chan? */
CRETIOP;
if (inst & 0400) { /* space? */
lpt_spc = inst; /* save instr */
lpt_sta = lpt_sta | SET_SPC; /* need space */
sim_cancel (&lpt_unit); /* cancel timer */
sim_activate (&lpt_unit, lpt_stime); /* start timer */
}
break;
case IO_DISC: /* disconnect */
lpt_end_op (0); /* normal term */
return lpt_bufout (&lpt_unit); /* dump output */
case IO_WREOR: /* write eor */
lpt_sta = (lpt_sta | SET_EOR) & ~SET_XFR; /* need eor */
sim_activate (&lpt_unit, lpt_ptime); /* start timer */
break;
case IO_SKS: /* SKS */
new_ch = I_GETSKCH (inst); /* sks chan */
if (new_ch != lpt_dib.chan) /* wrong chan? */
return SCPE_IERR;
t = I_GETSKCND (inst); /* sks cond */
if (((t == 020) && (!CHP (7, lpt_cct[lpt_ccp]))) || /* 14062: !ch 7 */
((t == 010) && (lpt_unit.flags & UNIT_ATT)) || /* 12062: !online */
((t == 004) && !lpt_err)) /* 11062: !err */
*dat = 1;
break;
case IO_WRITE: /* write */
asc = sds_to_ascii(*dat); /* convert data */
xfr_req = xfr_req & ~XFR_LPT; /* clr xfr flag */
if (lpt_bptr < LPT_WIDTH) /* store data */
lpt_buf[lpt_bptr++] = asc;
lpt_sta = lpt_sta | SET_XFR; /* need xfr */
sim_activate (&lpt_unit, lpt_ctime); /* start ch timer */
break;
default:
CRETINS;
}
return SCPE_OK;
}
/* Unit service and write */
t_stat lpt_svc (UNIT *uptr)
{
t_stat r = SCPE_OK;
if (lpt_sta & SET_XFR) /* need lpt xfr? */
chan_set_ordy (lpt_dib.chan);
if (lpt_sta & SET_EOR) { /* printing? */
chan_set_flag (lpt_dib.chan, CHF_EOR); /* set eor flg */
r = lpt_bufout (uptr); /* output buf */
}
if (lpt_sta & SET_SPC) { /* spacing? */
if (uptr->flags & UNIT_ATT) { /* attached? */
int32 ln = LPT_GETLN (lpt_spc); /* get lines, ch */
if (lpt_spc & 0200) /* n lines? */
lpt_space (uptr, ln); /* upspace */
else lpt_crctl (uptr, ln); /* carriage ctl */
}
r = lpt_status (uptr); /* update status */
}
lpt_sta = 0; /* clear state */
return r;
}
/* Trim and output buffer */
t_stat lpt_bufout (UNIT *uptr)
{
int32 i;
if ((uptr->flags & UNIT_ATT) && lpt_bptr) { /* attached? */
for (i = LPT_WIDTH - 1; (i >= 0) && (lpt_buf[i] == ' '); i--)
lpt_buf[i] = 0; /* trim line */
fputs (lpt_buf, uptr->fileref); /* write line */
lpt_bptr = 0;
}
return lpt_status (uptr); /* return status */
}
/* Status update after I/O */
t_stat lpt_status (UNIT *uptr)
{
if (uptr->flags & UNIT_ATT) { /* attached? */
uptr->pos = ftell (uptr->fileref); /* update position */
if (ferror (uptr->fileref)) { /* I/O error? */
lpt_end_op (CHF_EOR | CHF_ERR); /* set err, disc */
sim_perror ("LPT I/O error"); /* print msg */
clearerr (uptr->fileref);
return SCPE_IOERR; /* ret error */
}
}
else {
lpt_end_op (CHF_EOR | CHF_ERR); /* set err, disc */
CRETIOE (lpt_stopioe, SCPE_UNATT); /* ret error */
}
return SCPE_OK;
}
/* Terminate LPT operation */
void lpt_end_op (int32 fl)
{
if (fl) /* set flags */
chan_set_flag (lpt_dib.chan, fl);
xfr_req = xfr_req & ~XFR_LPT; /* clear xfr */
sim_cancel (&lpt_unit); /* stop */
if (fl & CHF_ERR) { /* error? */
chan_disc (lpt_dib.chan); /* disconnect */
lpt_err = 1; /* set lpt err */
}
return;
}
/* Carriage control */
t_stat lpt_crctl (UNIT *uptr, int32 ch)
{
int32 i, j;
if ((ch == 1) && CHP (ch, lpt_cct[0])) { /* top of form? */
fputs ("\f\n", uptr->fileref); /* ff + nl */
lpt_ccp = 0; /* top of page */
return SCPE_OK;
}
for (i = 1; i < lpt_ccl + 1; i++) { /* sweep thru cct */
lpt_ccp = (lpt_ccp + 1) % lpt_ccl; /* adv pointer */
if (CHP (ch, lpt_cct[lpt_ccp])) { /* chan punched? */
for (j = 0; j < i; j++)
fputc ('\n', uptr->fileref);
return SCPE_OK;
}
}
return STOP_CCT; /* runaway channel */
}
/* Spacing */
t_stat lpt_space (UNIT *uptr, int32 cnt)
{
int32 i;
if (cnt == 0)
fputc ('\r', uptr->fileref);
else {
for (i = 0; i < cnt; i++)
fputc ('\n', uptr->fileref);
lpt_ccp = (lpt_ccp + cnt) % lpt_ccl;
}
return SCPE_OK;
}
/* Reset routine */
t_stat lpt_reset (DEVICE *dptr)
{
chan_disc (lpt_dib.chan); /* disconnect */
lpt_spc = 0; /* clr state */
lpt_sta = 0;
xfr_req = xfr_req & ~XFR_LPT; /* clr xfr flag */
sim_cancel (&lpt_unit); /* deactivate */
return SCPE_OK;
}
/* Attach routine */
t_stat lpt_attach (UNIT *uptr, char *cptr)
{
lpt_ccp = 0; /* top of form */
return attach_unit (uptr, cptr);
}