| .TH vz 5 "12 Sep 2006" "OpenVZ" "Virtual Environments" |
| .SH NAME |
| vz \- global OpenVZ configuration file |
| .SH SYNOPSIS |
| /etc/vz/vz.conf |
| .SH DESCRIPTION |
| This is global configuration file for OpenVZ. |
| It consists of lines in the form |
| .PP |
| \fBPARAMETER\fR="\fIvalue\fR" |
| .PP |
| All parameter names and values are case-sensitive. |
| Quotes surrounding \fIvalue\fR are required if value contains spaces, and |
| are optional otherwise. Extra spaces are not allowed. All unrecognized lines |
| will be ignored. |
| .SS Global parameters |
| .IP \fBVIRTUOZZO\fR=\fByes\fR|\fBno\fR |
| This parameter can be set to \fByes\fR or \fBno\fR, and used by |
| \f(CW/etc/init.d/vz\fR script. In case it is not |
| set to \fByes\fR, nothing will be done to boot up OpenVZ on this node. |
| .IP "\fBLOCKDIR\fR=\fIdirectory\fR" |
| Set the directory to put lock files to. |
| .IP \fBVE0CPUUNITS\fR=\fInumber\fR |
| Value of this parameter sets \fBcpuunits\fR for VE0. |
| .IP "\fBLOGGING\fR=\fByes\fR|\fBno\fR" |
| Enables or disables logging. This parameter can be set to \fByes\fR or |
| \fBno\fR, default is \fByes\fR. |
| .IP \fBLOGFILE\fR=\fIfile\fR |
| Set location of log file, default is \f(CR/var/log/vzctl.log\fR. |
| .IP "\fBLOG_LEVEL\fR=\fInumber\fR" |
| Set the logging level. The more \fInumber\fR is, the more information will be |
| displayed. |
| .SS Disk quota parameters |
| .IP \fBDISK_QUOTA\fR=\fByes\fR|\fBno\fR |
| In case the value of this parameter is set to \fBno\fR, all disk |
| quota operations are disabled. |
| .IP \fBVZFASTBOOT\fR=\fByes\fR|\fBno\fR |
| This parameter is used by \f(CR/etc/init.d/vz start\fR script. In case the value |
| of this parameter is set to \fByes\fR, VE with incorrectly shutdown quota state |
| started without quota check and after all VEs started marked VEs restarted. |
| .SS Network interface parameters |
| .IP \fBVE_ROUTE_SRC_DEV\fR="\fIdevice\fR" |
| This parameter specifies the network device name which ip address will used for |
| source ip. If on HN configured > 1 network interfaces and needed to specify |
| the source ip address, set corresponding \fIdevice\fR. By default takes the |
| first in network device list. |
| .IP \fBTEMPLATE\fR=\fIdirectory\fR |
| Value of this parameter is a directory in which all VE template data are |
| stored. |
| .SS Defaults for VE |
| Below parameters are defaults for VE, and gets overwritten by parameters in |
| \fBvps.conf\fR(5) VE configuration file. |
| .IP \fBVE_ROOT\fR=\fIdirectory\fR |
| Value of this parameter is the \fIdirectory\fR which serves as VE root |
| mount point. Value must contain string \fI$VEID\fR, it gets substituted |
| with actual numeric VE ID. |
| .IP \fBVE_PRIVATE\fR=\fIdirectory\fR |
| Value of this parameter is the \fIdirectory\fR in which all the |
| files and directories specific to that VE are stored. Value must contain |
| string \fI$VEID\fR, it gets substituted with actual numeric VE ID. |
| .IP \fBCONFIGFILE\fR=\fIname\fR |
| Specified default configuration file on create action, corresponds to --config |
| option |
| .PP |
| Any other parameter that appears in per-PE configuration file \fBvps.conf\fR(5) |
| can be also set here. Still, it is recommended to keep \fBTEMPLATE\fR, |
| \fBVE_PRIVATE\fR and \fBVE_ROOT\fR in this configuration files, and all the |
| other VE-related parameters in per-VE configuration files. |
| .SH SEE ALSO |
| .BR vzctl (8), |
| .BR vps.conf (5). |
| .SH LICENSE |
| Copyright (C) 2000-2006, SWsoft. Licensed under GNU GPL. |