| .TH arpsend 8 "12 Sep 2006" "OpenVZ" "Virtual Environments" |
| .SH NAME |
| arpsend \- utility to send ARP requests. |
| .\" to detect or update neighbours ARP cashes with given IP. |
| .SH SYNOPSIS |
| arpsend < \fB-U\fR \fB-i\fR\ \fIsource_ip\fR |\ \fB-D\fR\ |
| \fB-e\fR\ \fItarget_ip\fR [\fB-e\fR\ \fItarget_ip\fR]\ ... > |
| [\fB-c\fR \fIcount\fR] [\fB-w\fR \fItimeout\fR] |
| \fIinterface\fR |
| .SH DESCRIPTION |
| Utility \fBarpsend\fR sends ARP packets on device \fIinterface\fR to detect |
| or update neighbours' ARP caches with a given IP. |
| .SH COMMANDS |
| Run utility with one of the following commands: |
| .TP |
| \fB-D\fR |
| Send broadcast ARP request to detect neighbours with |
| \fItarget_ip\fR. You have to specify \fItarget_ip\fR (\fB-e\fR option). |
| .TP |
| \fB-U\fR |
| Send broadcast ARP request to update neighbours' ARP caches with |
| \fIsource_ip\fR. You have to specify \fIsource_ip\fR (\fB-i\fR option). |
| .SH OPTIONS |
| .TP |
| \fB-c\fR \fIcount\fR |
| Number of packets to send. Default is infinity. |
| .TP |
| \fB-w\fR \fIinterval\fR |
| Interval between packets, in seconds. Default is 1 second. |
| .TP |
| \fB-i\fR \fIsource_ip_address\fR |
| Set source IP address field in ARP packet. |
| .TP |
| \fB-e\fR \fItarget_ip_address\fR |
| Set target IP address field in ARP packet. Note that you can specify |
| \fB-e\fR option multiple times to detect many IP addresses in one utility call. |
| .SH DIAGNOSTICS |
| \fBarpsend\fR returns 0 upon successful execution. If something goes wrong, it |
| returns an appropriate error code. |
| .IP "1 EXC_USAGE" |
| Usage error |
| .IP "2 EXC_SYSTEM" |
| System error |
| .IP "3 EXC_RECV" |
| ARP reply was received |
| .SH EXAMPLES |
| To send request on interface \fIeth0\fR to detect any neighbour |
| computers with IP \fI192.168.10.200\fR: |
| .br |
| \f(CW arpsend -D -e 192.168.10.200 eth0\fR |
| .P |
| To send request on interface \fIeth0\fR to update neighbours' |
| ARP caches with IP \fI192.168.10.200\fR: |
| .br |
| \f(CW arpsend -U -i 192.168.10.200 eth0\fR |
| .SH NOTES |
| Interface you use have to be arpable and not be loopback (i.e. |
| \fB/sbin/ip link show \fIinterface\fR should show neither \fBNOARP\fR |
| not \fBLOOPBACK\fR flags in interface parameters). |
| .SH SEE ALSO |
| .BR vzctl (8), |
| .SH LICENSE |
| Copyright (C) 2000-2006, SWsoft. Licensed under GNU GPL. |