etc/init.d/vz-gentoo.in - vzctl - Rivoreo Source Code Repositories

 #!/sbin/runscript
 # Copyright 1999-2005 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
 # $Header: /var/www/viewcvs.gentoo.org/raw_cvs/gentoo-x86/sys-cluster/vzctl/files/vz-3.0.10.initd,v 1.2 2006/07/09 10:29:24 phreak Exp $

 depend() {
 	after net vzeventd
 }

 check_config() {
 	# if we don't want openvz running, say so
 	[ "${VIRTUOZZO}" = "yes" ] || return 1

 	# set default values
 	: ${VZCTL:=@SBINDIR@/vzctl}
 	: ${VZQUOTA:=@SBINDIR@/vzquota}
 	: ${VZVEINFO:=/proc/vz/veinfo}
 	: ${VESTAT:=/proc/vz/vestat}
 	: ${VPSCONFDIR:=@VPSCONFDIR@}
 	: ${VZREBOOTDIR:=@VZREBOOTDIR@}
 	: ${VZDEV:=venet0}
 	: ${VZCONF:=@PKGCONFDIR@/vz.conf}
 	: ${VE_STOP_MODE:=suspend}

 	if [ "${MODULES_DISABLED}" != "yes" ]; then
 		: ${IPTABLES_MODULES:="${IPTABLES}"}
 		IPTABLES_MODULES="ip_tables ${IPTABLES_MODULES} xt_tcpudp"
 		: ${PRELOAD_MODULES:="af_packet"}
 		: ${MODULES:="vzmon vzdquota vzdev"}
 		: ${MIGRATE_MODULES:="vzcpt vzrst"}
 		: ${NET_MODULES="vznetdev vznet vzethdev"}
 		: ${PLOOP_MODULES="ploop pfmt_ploop1 pfmt_raw pio_direct pio_nfs"}

 		# check if you should load vzwdog module
 		[ "${VZWDOG}" = "yes" ] && MODULES="${MODULES} vzwdog"
 	fi

 	# we need a working vzctl
 	if [ ! -x "${VZCTL}" ]; then
 		eerror "vzctl missing (${VZCTL})"
 		return 1
 	fi

 	if [ -z "${VE0CPUUNITS}" ]; then
 		ewarn "VE0CPUUNITS is not set in /etc/conf.d/vz; using default value of 1000"
 		VE0CPUUNITS=1000
 	fi
 	return 0
 }

 mount_cgroups()
 {
 	local g
 	for g in beancounter container fairsched ; do
 		if [ -d /proc/vz/$g ]; then
 			mount -t cgroup $g /proc/vz/$g -o name=$g 2>/dev/null
 		fi
 	done
 }

 umount_cgroups()
 {
 	local g
 	for g in beancounter container fairsched ; do
 		umount /proc/vz/$g 2>/dev/null
 	done
 }

 setup_ve0() {
 	local msg ve0conf="${VPSCONFDIR}/0.conf"

 	mount_cgroups

 	msg=$(${VZCTL} set 0 --cpuunits ${VE0CPUUNITS} 2>&1)
 	[ $? -ne 0 ] && ewarn "vzctl set 0 --cpuunits ${VE0CPUUNITS} failed: ${msg}"

 	test -f ${ve0conf} || return
 	egrep -q '^ONBOOT=yes\|^ONBOOT=\"yes\"' ${ve0conf} || return

 	ebegin "Configuring hardware node UB resources"
 	msg=$(${VZCTL} set 0 --reset_ub 2>&1)
 	eend $? ${msg}
 }

 start_net() {
 	local mod

 	# load necessary modules
 	for mod in ${NET_MODULES}; do
 		modprobe ${mod} 2>/dev/null
 	done

 	if [ ! -f ${VZVEINFO} ]; then
 		return 0
 	fi

 	# we don't operate on a running interface
 	if ip addr list | grep -q "venet0:.*UP" 2>/dev/null; then
 		return 0
 	fi

 	# configure the device
 	ebegin "Bringing up interface ${VZDEV}"
 		ip link set ${VZDEV} up
 	eend $?

 	ip addr add 0.0.0.0/0 dev ${VZDEV}

 	ebegin "Configuring interface ${VZDEV}"
 		sysctl -q -w net.ipv4.conf.${VZDEV}.send_redirects=0
 	eend $?

 	if [ "x$(sysctl -n -e net.ipv4.ip_forward)" != "x1" ]; then
 		ewarn "It looks like you have ip forwarding disabled. To make networking"
 		ewarn "available for containers, please, run sysctl -w net.ipv4.ip_forward=1"
 	fi
 }

 stop_net() {
 	local mod

 	if ip addr list | grep -q "venet0:.*UP" 2>/dev/null; then
 		ebegin "Bringing down interface ${VZDEV}"
 			ip link set ${VZDEV} down 2>/dev/null
 		eend $?
 	fi

 	# remove all modules we probably loaded on start_net
 	for mod in ${NET_MODULES}; do
 		modprobe -r ${mod} > /dev/null 2>&1
 	done
 }

 start_ve() {
 	local veid velist msg need_restart=""

 	# CTs that were running before a reboot
 	velist=$(ls $VZREBOOTDIR)
 	rm -f $VZREBOOTDIR/*
 	# ... and not have ONBOOT=no
 	test -n "$velist" && velist=$(vzlist -aH -octid,onboot $velist |
 			awk '$2 != "no" {print $1}')
 	# ... plus ones with ONBOOT=yes
 	velist=$(echo "$velist"; vzlist -aH -octid,onboot |
 			awk '$2 == "yes" {print $1}')
 	# Then sort by bootorder
 	test -n "$velist" && velist=$(vzlist -aH -octid -s-bootorder $velist)

 	sysctl -q -w net.ipv4.route.src_check=0

 	for veid in ${velist}; do
 		ebegin "Starting CT ${veid}"
 		if [ "${VZFASTBOOT}" = "yes" -a "${DISK_QUOTA}" = "yes" ]; then
 			${VZQUOTA} stat ${veid} >/dev/null 2>&1
 			if [ $? -eq 6 ]; then
 				if ${VZQUOTA} show ${veid} 2>&1 | grep "vzquota : (warning) Quota is running" >/dev/null 2>&1; then
 					${VZQUOTA} on ${veid} --nocheck >/dev/null 2>&1
 					need_restart="${need_restart} ${veid}"
 				fi
 			fi
 		fi
 		rm -f $VZREBOOTDIR/$veid
 		msg=$(${VZCTL} start ${veid} 2>&1)
 		eend $? "${msg}"
 	done

 	for veid in ${need_restart}; do
 		ebegin "Stopping CT ${veid}"
 		msg=$(${VZCTL} stop ${veid})
 		eend $? "${msg}"

 		ebegin "Starting CT ${veid}"
 		msg=$($VZCTL start ${veid} 2>&1)
 		eend $? "${msg}"
 	done

 	# we're ok even if some CTs failed to start
 	return 0
 }

 get_parallel()
 {
 	[ -n "${PARALLEL}" ] && return
 	PARALLEL=`awk '
 BEGIN { num=0; }
 $1 == "processor" { num++; }
 END { print num * 4; }' /proc/cpuinfo`
 }

 stop_ve() {
 	local veid velist i iter pid pids stage stages msg

 	if [ ! -f ${VESTAT} ]; then
 		return
 	fi

 	# Pre-stop stage
 	rm -f $VZREBOOTDIR/*
 	velist=$(vzlist -1 2>/dev/null)
 	for veid in $velist; do
 		# Equalize cpuunits for all CTs
 		$VZCTL set $veid --cpuunits 2000 >/dev/null 2>&1
 		# Save to vzreboot list
 		touch $VZREBOOTDIR/$veid
 	done
 	get_parallel
 	stages="stop"
 	[ "$VE_STOP_MODE" = "suspend" ] && stages="suspend stop"
 	for stage in $stages; do
 		case $stage in
 			suspend)
 				msg='Suspending CT'
 				;;
 			stop)
 				msg='Shutting down CT'
 				;;
 		esac
 		for ((i = 0; i <= 2; i++)); do
 			iter=0
 			pids=
 			velist=$(vzlist -H -o ctid -sbootorder 2>/dev/null)
 			for veid in ${velist}; do
 				ebegin "$msg $veid"
 				if [ "$stage" = "stop" ]; then
 					# Unset cpulimit for CT to stop fast
 					$VZCTL set $veid --cpulimit 0 >/dev/null 2>&1
 				fi
 				${VZCTL} --skiplock $stage ${veid} >/dev/null 2>&1 &
 				pids="${pids} $!"
 				let iter++
 				if [ ${iter} -gt ${PARALLEL} ]; then
 					for pid in ${pids}; do
 						wait ${pid}
 					done
 					pids=
 					iter=0
 				fi
 			done

 			for pid in ${pids}; do
 				wait ${pid}
 			done
 		done
 	done
 }

 umount_ve() {
 	local iter=0
 	local fail=1
 	local m mounts msg quota

 	while [ ${iter} -lt 5 -a ${fail} -ne 0 ]; do
 		fail=0
 		mounts=$(awk '{if ($3=="simfs") print $2}' /proc/mounts)

 		for m in ${mounts}; do
 			ebegin "Unmounting CT area ${m}"
 			msg=$(umount ${m} 2>&1)
 			eend $? "${msg}"
 			if [ $? -ne 0 ]; then
 				let fail++
 				fuser -k -m ${m} > /dev/null 2>&1
 			fi
 		done

 		let iter++
 	done

 	# turn quota off
 	quota=$(awk -F: '/^[0-9]+:/{print $1}' /proc/vz/vzquota 2>/dev/null)

 	for m in ${quota}; do
 		ebegin "Turning quota off for CT ${m}"
 		msg=$(vzquota off ${m} 2>&1)
 		eend $? "${msg}"
 	done
 }

 modify_vzconf()
 {
 	# For vswap-enabled kernel (like RHEL6 042test or greater),
 	# use vswap config for CT. Don't do it if CONFIGFILE= is modified

 	egrep -q 'test|stab' /proc/vz/version 2>/dev/null || return 0

 	local cfg_old='^CONFIGFILE="basic" # Use vswap-256m on RHEL6 kernel$'
 	local cfg_new='CONFIGFILE="vswap-256m"'
 	local kv=$(cat /proc/vz/version | sed 's/\(test\|stab\).*$//')
 	if test $kv -ge 42; then
 		if grep -q "$cfg_old" $VZCONF; then
 			sed -i "s/${cfg_old}/${cfg_new}/" $VZCONF
 			ewarn "Setting $cfg_new in $VZCONF"
 		fi
 	fi
 }


 start() {
 	check_config || return

 	local mod rc

 	ebegin "Loading OpenVZ modules"
 	for mod in ${IPTABLES_MODULES}; do
 		modprobe ${mod} >/dev/null 2>&1
 	done

 	for mod in ${PRELOAD_MODULES}; do
 		modprobe -r ${mod} >/dev/null 2>&1
 		modprobe ${mod} >/dev/null 2>&1
 	done

 	for mod in ${MODULES}; do
 		modprobe ${mod} >/dev/null 2>&1
 		rc=$?
 		if [ ${rc} -ne 0 ]; then
 			eend ${rc} "failed to load module ${mod}"
 			return ${rc}
 		fi
 	done

 	for mod in ${MIGRATE_MODULES} ${PLOOP_MODULES}; do
 		modprobe ${mod} >/dev/null 2>&1
 	done
 	eend

 	if [ ! -e /dev/vzctl ]; then
 		eerror "Missing device node /dev/vzctl"
 		einfo
 		einfo "Please create the vzctl device node using the following command:"
 		einfo "   /bin/mknod /dev/vzctl c 126 0"
 		einfo
 		return 1
 	fi

 	if [ -f /proc/vz/oom_score_adj ]; then
 		ebegin "Applying OOM adjustments"
 		cat /etc/vz/oom-groups.conf > /proc/vz/oom_score_adj
 		eend $?
 	fi

 	start_net
 	setup_ve0
 	modify_vzconf
 	start_ve
 }

 stop() {
 	check_config || return

 	# Avoid stop action inside a CT, check we are in CT0
 	if test -r /proc/user_beancounters; then
 		if ! egrep -q '^[[:space:]]*0:[[:space:]]' \
 				/proc/user_beancounters; then
 			eerror "Looks like we are inside a container!"
 			return 1
 		fi
 	fi

 	local mod

 	stop_ve
 	umount_ve
 	umount_cgroups
 	stop_net

 	for mod in ${MIGRATE_MODULES} ${PLOOP_MODULES}; do
 		modprobe -r ${mod} > /dev/null 2>&1
 	done

 	for mod in ${MODULES}; do
 		modprobe -r ${mod} > /dev/null 2>&1
 	done

 	for mod in ${PRELOAD_MODULES}; do
 		modprobe -r ${mod} > /dev/null 2>&1
 	done

 	# Even if some modules failed to unload (say they were not loaded)
 	# we return 0 for the service to be marked as stopped.
 	return 0
 }
	#!/sbin/runscript
	# Copyright 1999-2005 Gentoo Foundation
	# Distributed under the terms of the GNU General Public License v2
	# $Header: /var/www/viewcvs.gentoo.org/raw_cvs/gentoo-x86/sys-cluster/vzctl/files/vz-3.0.10.initd,v 1.2 2006/07/09 10:29:24 phreak Exp $

	depend() {
	after net vzeventd
	}

	check_config() {
	# if we don't want openvz running, say so
	[ "${VIRTUOZZO}" = "yes" ] \|\| return 1

	# set default values
	: ${VZCTL:=@SBINDIR@/vzctl}
	: ${VZQUOTA:=@SBINDIR@/vzquota}
	: ${VZVEINFO:=/proc/vz/veinfo}
	: ${VESTAT:=/proc/vz/vestat}
	: ${VPSCONFDIR:=@VPSCONFDIR@}
	: ${VZREBOOTDIR:=@VZREBOOTDIR@}
	: ${VZDEV:=venet0}
	: ${VZCONF:=@PKGCONFDIR@/vz.conf}
	: ${VE_STOP_MODE:=suspend}

	if [ "${MODULES_DISABLED}" != "yes" ]; then
	: ${IPTABLES_MODULES:="${IPTABLES}"}
	IPTABLES_MODULES="ip_tables ${IPTABLES_MODULES} xt_tcpudp"
	: ${PRELOAD_MODULES:="af_packet"}
	: ${MODULES:="vzmon vzdquota vzdev"}
	: ${MIGRATE_MODULES:="vzcpt vzrst"}
	: ${NET_MODULES="vznetdev vznet vzethdev"}
	: ${PLOOP_MODULES="ploop pfmt_ploop1 pfmt_raw pio_direct pio_nfs"}

	# check if you should load vzwdog module
	[ "${VZWDOG}" = "yes" ] && MODULES="${MODULES} vzwdog"
	fi

	# we need a working vzctl
	if [ ! -x "${VZCTL}" ]; then
	eerror "vzctl missing (${VZCTL})"
	return 1
	fi

	if [ -z "${VE0CPUUNITS}" ]; then
	ewarn "VE0CPUUNITS is not set in /etc/conf.d/vz; using default value of 1000"
	VE0CPUUNITS=1000
	fi
	return 0
	}

	mount_cgroups()
	{
	local g
	for g in beancounter container fairsched ; do
	if [ -d /proc/vz/$g ]; then
	mount -t cgroup $g /proc/vz/$g -o name=$g 2>/dev/null
	fi
	done
	}

	umount_cgroups()
	{
	local g
	for g in beancounter container fairsched ; do
	umount /proc/vz/$g 2>/dev/null
	done
	}

	setup_ve0() {
	local msg ve0conf="${VPSCONFDIR}/0.conf"

	mount_cgroups

	msg=$(${VZCTL} set 0 --cpuunits ${VE0CPUUNITS} 2>&1)
	[ $? -ne 0 ] && ewarn "vzctl set 0 --cpuunits ${VE0CPUUNITS} failed: ${msg}"

	test -f ${ve0conf} \|\| return
	egrep -q '^ONBOOT=yes\\|^ONBOOT=\"yes\"' ${ve0conf} \|\| return

	ebegin "Configuring hardware node UB resources"
	msg=$(${VZCTL} set 0 --reset_ub 2>&1)
	eend $? ${msg}
	}

	start_net() {
	local mod

	# load necessary modules
	for mod in ${NET_MODULES}; do
	modprobe ${mod} 2>/dev/null
	done

	if [ ! -f ${VZVEINFO} ]; then
	return 0
	fi

	# we don't operate on a running interface
	if ip addr list \| grep -q "venet0:.*UP" 2>/dev/null; then
	return 0
	fi

	# configure the device
	ebegin "Bringing up interface ${VZDEV}"
	ip link set ${VZDEV} up
	eend $?

	ip addr add 0.0.0.0/0 dev ${VZDEV}

	ebegin "Configuring interface ${VZDEV}"
	sysctl -q -w net.ipv4.conf.${VZDEV}.send_redirects=0
	eend $?

	if [ "x$(sysctl -n -e net.ipv4.ip_forward)" != "x1" ]; then
	ewarn "It looks like you have ip forwarding disabled. To make networking"
	ewarn "available for containers, please, run sysctl -w net.ipv4.ip_forward=1"
	fi
	}

	stop_net() {
	local mod

	if ip addr list \| grep -q "venet0:.*UP" 2>/dev/null; then
	ebegin "Bringing down interface ${VZDEV}"
	ip link set ${VZDEV} down 2>/dev/null
	eend $?
	fi

	# remove all modules we probably loaded on start_net
	for mod in ${NET_MODULES}; do
	modprobe -r ${mod} > /dev/null 2>&1
	done
	}

	start_ve() {
	local veid velist msg need_restart=""

	# CTs that were running before a reboot
	velist=$(ls $VZREBOOTDIR)
	rm -f $VZREBOOTDIR/*
	# ... and not have ONBOOT=no
	test -n "$velist" && velist=$(vzlist -aH -octid,onboot $velist \|
	awk '$2 != "no" {print $1}')
	# ... plus ones with ONBOOT=yes
	velist=$(echo "$velist"; vzlist -aH -octid,onboot \|
	awk '$2 == "yes" {print $1}')
	# Then sort by bootorder
	test -n "$velist" && velist=$(vzlist -aH -octid -s-bootorder $velist)

	sysctl -q -w net.ipv4.route.src_check=0

	for veid in ${velist}; do
	ebegin "Starting CT ${veid}"
	if [ "${VZFASTBOOT}" = "yes" -a "${DISK_QUOTA}" = "yes" ]; then
	${VZQUOTA} stat ${veid} >/dev/null 2>&1
	if [ $? -eq 6 ]; then
	if ${VZQUOTA} show ${veid} 2>&1 \| grep "vzquota : (warning) Quota is running" >/dev/null 2>&1; then
	${VZQUOTA} on ${veid} --nocheck >/dev/null 2>&1
	need_restart="${need_restart} ${veid}"
	fi
	fi
	fi
	rm -f $VZREBOOTDIR/$veid
	msg=$(${VZCTL} start ${veid} 2>&1)
	eend $? "${msg}"
	done

	for veid in ${need_restart}; do
	ebegin "Stopping CT ${veid}"
	msg=$(${VZCTL} stop ${veid})
	eend $? "${msg}"

	ebegin "Starting CT ${veid}"
	msg=$($VZCTL start ${veid} 2>&1)
	eend $? "${msg}"
	done

	# we're ok even if some CTs failed to start
	return 0
	}

	get_parallel()
	{
	[ -n "${PARALLEL}" ] && return
	PARALLEL=`awk '
	BEGIN { num=0; }
	$1 == "processor" { num++; }
	END { print num * 4; }' /proc/cpuinfo`
	}

	stop_ve() {
	local veid velist i iter pid pids stage stages msg

	if [ ! -f ${VESTAT} ]; then
	return
	fi

	# Pre-stop stage
	rm -f $VZREBOOTDIR/*
	velist=$(vzlist -1 2>/dev/null)
	for veid in $velist; do
	# Equalize cpuunits for all CTs
	$VZCTL set $veid --cpuunits 2000 >/dev/null 2>&1
	# Save to vzreboot list
	touch $VZREBOOTDIR/$veid
	done
	get_parallel
	stages="stop"
	[ "$VE_STOP_MODE" = "suspend" ] && stages="suspend stop"
	for stage in $stages; do
	case $stage in
	suspend)
	msg='Suspending CT'
	;;
	stop)
	msg='Shutting down CT'
	;;
	esac
	for ((i = 0; i <= 2; i++)); do
	iter=0
	pids=
	velist=$(vzlist -H -o ctid -sbootorder 2>/dev/null)
	for veid in ${velist}; do
	ebegin "$msg $veid"
	if [ "$stage" = "stop" ]; then
	# Unset cpulimit for CT to stop fast
	$VZCTL set $veid --cpulimit 0 >/dev/null 2>&1
	fi
	${VZCTL} --skiplock $stage ${veid} >/dev/null 2>&1 &
	pids="${pids} $!"
	let iter++
	if [ ${iter} -gt ${PARALLEL} ]; then
	for pid in ${pids}; do
	wait ${pid}
	done
	pids=
	iter=0
	fi
	done

	for pid in ${pids}; do
	wait ${pid}
	done
	done
	done
	}

	umount_ve() {
	local iter=0
	local fail=1
	local m mounts msg quota

	while [ ${iter} -lt 5 -a ${fail} -ne 0 ]; do
	fail=0
	mounts=$(awk '{if ($3=="simfs") print $2}' /proc/mounts)

	for m in ${mounts}; do
	ebegin "Unmounting CT area ${m}"
	msg=$(umount ${m} 2>&1)
	eend $? "${msg}"
	if [ $? -ne 0 ]; then
	let fail++
	fuser -k -m ${m} > /dev/null 2>&1
	fi
	done

	let iter++
	done

	# turn quota off
	quota=$(awk -F: '/^[0-9]+:/{print $1}' /proc/vz/vzquota 2>/dev/null)

	for m in ${quota}; do
	ebegin "Turning quota off for CT ${m}"
	msg=$(vzquota off ${m} 2>&1)
	eend $? "${msg}"
	done
	}

	modify_vzconf()
	{
	# For vswap-enabled kernel (like RHEL6 042test or greater),
	# use vswap config for CT. Don't do it if CONFIGFILE= is modified

	egrep -q 'test\|stab' /proc/vz/version 2>/dev/null \|\| return 0

	local cfg_old='^CONFIGFILE="basic" # Use vswap-256m on RHEL6 kernel$'
	local cfg_new='CONFIGFILE="vswap-256m"'
	local kv=$(cat /proc/vz/version \| sed 's/\(test\\|stab\).*$//')
	if test $kv -ge 42; then
	if grep -q "$cfg_old" $VZCONF; then
	sed -i "s/${cfg_old}/${cfg_new}/" $VZCONF
	ewarn "Setting $cfg_new in $VZCONF"
	fi
	fi
	}


	start() {
	check_config \|\| return

	local mod rc

	ebegin "Loading OpenVZ modules"
	for mod in ${IPTABLES_MODULES}; do
	modprobe ${mod} >/dev/null 2>&1
	done

	for mod in ${PRELOAD_MODULES}; do
	modprobe -r ${mod} >/dev/null 2>&1
	modprobe ${mod} >/dev/null 2>&1
	done

	for mod in ${MODULES}; do
	modprobe ${mod} >/dev/null 2>&1
	rc=$?
	if [ ${rc} -ne 0 ]; then
	eend ${rc} "failed to load module ${mod}"
	return ${rc}
	fi
	done

	for mod in ${MIGRATE_MODULES} ${PLOOP_MODULES}; do
	modprobe ${mod} >/dev/null 2>&1
	done
	eend

	if [ ! -e /dev/vzctl ]; then
	eerror "Missing device node /dev/vzctl"
	einfo
	einfo "Please create the vzctl device node using the following command:"
	einfo " /bin/mknod /dev/vzctl c 126 0"
	einfo
	return 1
	fi

	if [ -f /proc/vz/oom_score_adj ]; then
	ebegin "Applying OOM adjustments"
	cat /etc/vz/oom-groups.conf > /proc/vz/oom_score_adj
	eend $?
	fi

	start_net
	setup_ve0
	modify_vzconf
	start_ve
	}

	stop() {
	check_config \|\| return

	# Avoid stop action inside a CT, check we are in CT0
	if test -r /proc/user_beancounters; then
	if ! egrep -q '^[[:space:]]*0:[[:space:]]' \
	/proc/user_beancounters; then
	eerror "Looks like we are inside a container!"
	return 1
	fi
	fi

	local mod

	stop_ve
	umount_ve
	umount_cgroups
	stop_net

	for mod in ${MIGRATE_MODULES} ${PLOOP_MODULES}; do
	modprobe -r ${mod} > /dev/null 2>&1
	done

	for mod in ${MODULES}; do
	modprobe -r ${mod} > /dev/null 2>&1
	done

	for mod in ${PRELOAD_MODULES}; do
	modprobe -r ${mod} > /dev/null 2>&1
	done

	# Even if some modules failed to unload (say they were not loaded)
	# we return 0 for the service to be marked as stopped.
	return 0
	}