bin/vzmigrate.in - vzctl - Rivoreo Source Code Repositories

 #!/bin/bash
 #
 # vzmigrate is used for VE migration to another node
 # Copyright (C) 2000-2007 SWsoft. All rights reserved.
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License
 # as published by the Free Software Foundation; either version 2
 # of the License, or (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 #
 #
 # Usage:
 # vzmigrate [-r yes|no] [--ssh=<options>] [--keep-dst] [--online] [-v]
 #           destination_address VEID
 # Options:
 #	-r, --remove-area yes|no
 #		Whether to remove VE on source HN for successfully migrated VE.
 #	--ssh=<ssh options>
 #		Additional options that will be passed to ssh while establishing
 #		connection to destination HN. Please be careful with options
 #		passed, DO NOT pass destination hostname.
 #	--keep-dst
 #		Do not clean synced destination VE private area in case of some
 #		error. It makes sense to use this option on big VE migration to
 #		avoid syncing VE private area again in case some error
 #		(on VE stop for example) occurs during first migration attempt.
 #	--online
 #		Perform online (zero-downtime) migration: during the migration the
 #		VE hangs for a while and after the migration it continues working
 #		as though nothing has happened.
 #	-v
 #		Verbose mode. Causes vzmigrate to print debugging messages about
 #		its progress (including some time statistics).
 #
 # Examples:
 #	Online migration of VE #101 to foo.com:
 #		vzmigrate --online foo.com 101
 #	Migration of VE #102 to foo.com with downtime:
 #		vzmigrate foo.com 102
 # NOTE:
 #	This program uses ssh as a transport layer. You need to put ssh
 #	public key to destination node and be able to connect without
 #	entering a password.


 ACT_SCRIPTS_SFX="start stop mount umount"
 SSH_OPTIONS=""
 SSH="ssh $SSH_OPTIONS"
 SCP="scp $SSH_OPTIONS"

 online=0
 verbose=0
 remove_area=1
 keep_dst=0
 debug=0
 confdir="@PKGCONFDIR@/conf"
 vzconf="@PKGCONFDIR@/vz.conf"
 tmpdir="/var/tmp"
 act_scripts=

 # Errors:
 MIG_ERR_USAGE=1
 MIG_ERR_VPS_IS_STOPPED=2
 MIG_ERR_CANT_CONNECT=4
 MIG_ERR_COPY=6
 MIG_ERR_START_VPS=7
 MIG_ERR_STOP_SOURCE=8
 MIG_ERR_EXISTS=9
 MIG_ERR_NOEXIST=10
 MIG_ERR_IP_IN_USE=12
 MIG_ERR_QUOTA=13
 MIG_ERR_CHECKPOINT=$MIG_ERR_STOP_SOURCE
 MIG_ERR_MOUNT_VPS=$MIG_ERR_START_VPS
 MIG_ERR_RESTORE_VPS=$MIG_ERR_START_VPS
 MIG_ERR_OVZ_NOT_RUNNING=14
 MIG_ERR_APPLY_CONFIG=15

 usage() {
 	cat <<EOF
 This program is used for VE migration to another node
 Usage:
 vzmigrate [-r yes|no] [--ssh=<options>] [--keep-dst] [--online] [-v]
 	destination_address <VEID>
 Options:
 -r, --remove-area yes|no
 	Whether to remove VE on source HN for successfully migrated VE.
 --ssh=<ssh options>
 	Additional options that will be passed to ssh while establishing
 	connection to destination HN. Please be careful with options
 	passed, DO NOT pass destination hostname.
 --keep-dst
 	Do not clean synced destination VE private area in case of some
 	error. It makes sense to use this option on big VE migration to
 	avoid syncing VE private area again in case some error
 	(on VE stop for example) occurs during first migration attempt.
 --online
 	Perform online (zero-downtime) migration: during the migration the
 	VE hangs for a while and after the migration it continues working
 	as though nothing has happened.
 -v
 	Verbose mode. Causes vzmigrate to print debugging messages about
 	its progress (including some time statistics).
 EOF
 	exit $MIG_ERR_USAGE
 }

 # Logs message
 # There are 3 types of messages:
 # 0 - error messages (print to stderr)
 # 1 - normal messages (print to stdout)
 # 2 - debug messages (print to stdout if in verbose mode)
 log () {
 	if [ $1 -eq 0 ]; then
 		shift
 		echo -e "Error: " $@ >&2
 	elif [ $1 -eq 1 ]; then
 		shift
 		echo -e $@
 	elif [ $verbose -eq 1 ]; then
 		shift
 		echo -e "   " $@
 	fi
 }

 # Executes command and returns result of execution
 # There are 2 types of execution:
 # 1 - normal execution (all output will be printed)
 # 2 - debug execution (output will be printed if verbose mode is set,
 #     in other case stdout and stderr redirected to /dev/null)
 logexec () {
 	if [ $1 -eq 1 -o $verbose -eq 1 ]; then
 		shift
 		$@
 	else
 		shift
 		$@ &> /dev/null
 	fi
 	return $?
 }

 undo_conf () {
 	$SSH "root@$host" "rm -f $vpsconf"
 }

 undo_act_scripts () {
 	if [ -n "$act_scripts" ] ; then
 		$SSH "root@$host" "rm -f $act_scripts"
 	fi
 	undo_conf
 }

 undo_private () {
 	if [ $keep_dst -eq 0 ]; then
 		$SSH "root@$host" "rm -rf $VE_PRIVATE"
 	fi
 	undo_act_scripts
 }

 undo_root () {
 	$SSH "root@$host" "rm -rf $VE_ROOT"
 	undo_private
 }

 undo_quota_init () {
 	$SSH "root@$host" "vzquota drop $VEID"
 	undo_root
 }

 undo_quota_on () {
 	$SSH "root@$host" "vzquota off $VEID"
 	undo_quota_init
 }

 undo_sync () {
 	# Root will be destroed in undo_root
 	undo_quota_on
 }

 undo_suspend () {
 	logexec 2 vzctl chkpnt $VEID --resume
 	undo_sync
 }

 undo_dump () {
 	if [ $debug -eq 0 ]; then
 		rm -f "$VE_DUMPFILE"
 	fi
 	undo_suspend
 }

 undo_copy_dump () {
 	$SSH "root@$host" "rm -f $VE_DUMPFILE"
 	undo_suspend
 }

 undo_stop () {
 	if [ "$state" = "running" ]; then
 		vzctl start $VEID
 	elif [ "$mounted" = "mounted" ]; then
 		vzctl mount $VEID
 	fi
 	undo_sync
 }

 undo_source_stage() {
 	if [ $online -eq 1 ]; then
 		undo_copy_dump
 	else
 		undo_stop
 	fi
 }

 undo_quota_dump () {
 	rm -f "$VE_QUOTADUMP"
 	undo_source_stage
 }

 undo_copy_quota () {
 	$SSH "root@$host" "rm -f $VE_QUOTADUMP"
 	undo_quota_dump
 }

 undo_undump () {
 	logexec 2 $SSH root@$host vzctl restore $VEID --kill
 	undo_copy_quota
 }

 get_status() {
 	exist=$3
 	mounted=$4
 	state=$5
 }

 get_time () {
 	awk -v t2=$2 -v t1=$1 'BEGIN{print t2-t1}'
 }

 if [ $# -lt 2 ]; then
 	usage
 fi

 while [ ! -z "$1" ]; do
 	log 1 "OPT:$1"
 	case "$1" in
 	--online)
 		online=1
 		;;
 	-v)
 		verbose=1
 		;;
 	--remove-area|-r)
 		shift
 		if [ "$1" = "yes" ]; then
 			remove_area=1
 		elif [ "$1" = "no" ]; then
 			remove_area=0;
 		else
 			usage
 		fi
 		;;
 	--keep-dst)
 		keep_dst=1
 		;;
 	--ssh=*)
 		SSH_OPTIONS="$SSH_OPTIONS $(echo $1 | cut -c7-)"
 		SSH="ssh $SSH_OPTIONS"
 		SCP="scp $SSH_OPTIONS"
 		;;
 	*)
 		break
 		;;
 	esac
 	shift
 done

 host=$1
 shift
 VEID=$1
 shift

 if [ -z "$host" -o -z "$VEID" -o $# -ne 0 ]; then
 	usage
 fi

 vpsconf="$confdir/$VEID.conf"

 if [ ! -r "$vzconf" -o ! -r "$vpsconf" ]; then
 	log 0 "Can't read global config or VE #$VEID config file"
 	exit $MIG_ERR_NOEXIST
 fi

 get_status $(vzctl status $VEID)
 if [ "$exist" = "deleted" ]; then
 	log 0 "VE #$VEID doesn't exist"
 	exit $MIG_ERR_NOEXIST
 fi

 if [ $online -eq 1 ]; then
 	log 1 "Starting online migration of VE $VEID on $host"
 else
 	log 1 "Starting migration of VE $VEID on $host"
 fi

 # Try to connect to destination
 if ! logexec 2 $SSH -o BatchMode=yes root@$host /bin/true; then
 	log 0 "Can't connect to destination address using public key"
 	log 0 "Please put your public key to destination node"
 	exit $MIG_ERR_CANT_CONNECT
 fi

 # Check if OpenVZ is running
 if ! logexec 2 $SSH -o BatchMode=yes root@$host /etc/init.d/vz status ; then
 	log 0 "OpenVZ is not running on the target machine"
 	log 0 "Can't continue migration"
 	exit $MIG_ERR_OVZ_NOT_RUNNING
 fi

 dst_exist=$($SSH "root@$host" "vzctl status $VEID" | awk '{print $3}')
 if [ "$dst_exist" = "exist" ]; then
 	log 0 "VE #$VEID already exists on destination node"
 	exit $MIG_ERR_EXISTS
 fi

 if [ $online -eq 1 -a "$state" != "running" ]; then
 	log 0 "Can't perform online migration of stopped VE"
 	exit $MIG_ERR_VPS_IS_STOPPED
 fi

 log 2 "Loading $vzconf and $vpsconf files"

 . "$vzconf"
 . "$vpsconf"
 VE_DUMPFILE="$tmpdir/dump.$VEID"
 VE_QUOTADUMP="$tmpdir/quotadump.$VEID"

 log 2 "Check IPs on destination node: $IP_ADDRESS"
 for IP in $IP_ADDRESS; do
 	if [ $($SSH "root@$host" "grep -c \" $IP \" /proc/vz/veip") -gt 0 ];
 	then
 		log 0 "IP address $IP already in use on destination node"
 		exit $MIG_ERR_IP_IN_USE
 	fi
 done

 log 1 "Preparing remote node"

 log 2 "Copying config file"
 if ! logexec 2 $SCP $vpsconf root@$host:$vpsconf ; then
 	log 0 "Failed to copy config file"
 	exit $MIG_ERR_COPY
 fi

 logexec 2 $SSH root@$host vzctl set $VEID --applyconfig_map name --save
 # vzctl return code 20 or 21 in case of unrecognized option
 if [[ $? != 20 && $? != 21 && $? != 0 ]]; then
 	log 0 "Failed to apply config on destination node"
 	undo_conf
 	exit $MIG_ERR_APPLY_CONFIG
 fi

 for sfx in $ACT_SCRIPTS_SFX; do
 	file="$confdir/$VEID.$sfx"
 	if [ -f "$file" ]; then
 		act_scripts="$act_scripts $file"
 	fi
 done
 if [ -n "$act_scripts" ]; then
 	log 2 "Copying action scripts"
 	if ! logexec 2 $SCP $act_scripts root@$host:$confdir ; then
 		log 0 "Failed to copy action scripts"
 		undo_conf
 		exit $MIG_ERR_COPY
 	fi
 fi

 log 2 "Creating remote VE root dir"
 if ! $SSH "root@$host" "mkdir -p $VE_ROOT"; then
 	log 0 "Failed to make VE root"
 	undo_act_scripts
 	exit $MIG_ERR_COPY
 fi

 log 2 "Creating remote VE private dir"
 if ! $SSH "root@$host" "mkdir -p $VE_PRIVATE"; then
 	log 0 "Failed to make VE private area"
 	undo_private
 	exit $MIG_ERR_COPY
 fi

 log 1 "Initializing remote quota"

 log 2 "Quota init"
 if ! $SSH "root@$host" "vzctl quotainit $VEID"; then
 	log 0 "Failed to initialize quota"
 	undo_root
 	exit $MIG_ERR_QUOTA
 fi

 log 2 "Turning remote quota on"
 if ! $SSH "root@$host" "vzctl quotaon $VEID"; then
 	log 0 "Failed to turn quota on"
 	undo_quota_init
 	exit $MIG_ERR_QUOTA
 fi

 log 1 "Syncing private"
 if ! rsync -aH --delete --progress \
 		"$VE_PRIVATE" "root@$host:${VE_PRIVATE%/*}" | \
 		grep "% of" | awk -v ORS="\r" '{print $10}'; then
 	log 0 "Failed to sync VE private areas"
 	undo_quota_on
 	exit $MIG_ERR_COPY
 fi

 if [ $online -eq 1 ]; then
 	log 1 "Live migrating VE"

 	log 2 "Suspending VE"
 	time_suspend=$(date +%s.%N)
 	if ! logexec 2 vzctl chkpnt $VEID --suspend ; then
 		log 0 "Failed to suspend VE"
 		undo_sync
 		exit $MIG_ERR_CHECKPOINT
 	fi

 	log 2 "Dumping VE"
 	if ! logexec 2 vzctl chkpnt $VEID --dump --dumpfile $VE_DUMPFILE ; then
 		log 0 "Failed to dump VE"
 		undo_suspend
 		exit $MIG_ERR_CHECKPOINT
 	fi

 	log 2 "Copying dumpfile"
 	time_copy_dump=$(date +%s.%N)
 	if ! logexec 2 $SCP $VE_DUMPFILE root@$host:$VE_DUMPFILE ; then
 		log 0 "Failed to copy dump"
 		undo_dump
 		exit $MIG_ERR_COPY
 	fi
 else
 	if [ "$state" = "running" ]; then
 		log 1 "Stopping VE"
 		if ! logexec 2 vzctl stop $VEID ; then
 			log 0 "Failed to stop VE"
 			undo_sync
 			exit $MIG_ERR_STOP_SOURCE
 		fi
 	elif [ "$mounted" = "mounted" ]; then
 		log 1 "Unmounting VE"
 		if ! logexec 2 vzctl umount $VEID ; then
 			log 0 "Failed to umount VE"
 			undo_sync
 			exit $MIG_ERR_STOP_SOURCE
 		fi
 	fi
 fi

 if [ "$state" = "running" ]; then
 	log 2 "Syncing private (2nd pass)"
 	time_rsync2=$(date +%s.%N)
 	if ! rsync -aH --delete \
 			"$VE_PRIVATE" "root@$host:${VE_PRIVATE%/*}"; then
 		log 0 "Failed to sync VE private areas"
 		undo_source_stage
 		exit $MIG_ERR_COPY
 	fi
 fi

 log 1 "Syncing 2nd level quota"

 log 2 "Dumping 2nd level quota"
 time_quota=$(date +%s.%N)
 if ! vzdqdump $VEID -U -G -T > "$VE_QUOTADUMP"; then
 	log 0 "Failed to dump 2nd level quota"
 	undo_quota_dump
 	exit $MIG_ERR_QUOTA
 fi

 log 2 "Copying 2nd level quota"
 if ! logexec 2 $SCP $VE_QUOTADUMP root@$host:$VE_QUOTADUMP ; then
 	log 0 "Failed to copy 2nd level quota dump"
 	undo_quota_dump
 	exit $MIG_ERR_COPY
 fi

 log 2 "Load 2nd level quota"
 if ! $SSH "root@$host" "(vzdqload $VEID -U -G -T < $VE_QUOTADUMP && \
 		vzquota reload2 $VEID)"; then
 	log 0 "Failed to load 2nd level quota"
 	undo_copy_quota
 	exit $MIG_ERR_QUOTA
 fi

 if [ $online -eq 1 ]; then
 	log 2 "Undumping VE"
 	time_undump=$(date +%s.%N)
 	if ! logexec 2 $SSH root@$host vzctl restore $VEID --undump \
 			--dumpfile $VE_DUMPFILE --skip_arpdetect ; then
 		log 0 "Failed to undump VE"
 		undo_copy_quota
 		exit $MIG_ERR_RESTORE_VPS
 	fi

 	log 2 "Resuming VE"
 	if ! logexec 2 $SSH root@$host vzctl restore $VEID --resume ; then
 		log 0 "Failed to resume VE"
 		undo_undump
 		exit $MIG_ERR_RESTORE_VPS
 	fi
 	time_finish=$(date +%s.%N)
 	log 2 "Times:"
 	log 2 "\tSuspend + Dump:\t" $(get_time $time_suspend $time_copy_dump)
 	log 2 "\tCopy dump file:\t" $(get_time $time_copy_dump $time_rsync2)
 	log 2 "\tSecond rsync:\t" $(get_time $time_rsync2 $time_quota)
 	log 2 "\t2nd level quota:\t" $(get_time $time_quota $time_undump)
 	log 2 "\tUndump + Resume:\t" $(get_time $time_undump $time_finish)
 	log 2 "Total time: " $(get_time $time_suspend $time_finish)

 	log 1 "Cleanup"

 	log 2 "Killing VE"
 	logexec 2 vzctl chkpnt $VEID --kill
 	logexec 2 vzctl umount $VEID

 	log 2 "Removing dumpfiles"
 	rm -f "$VE_DUMPFILE"
 	$SSH "root@$host" "rm -f $VE_DUMPFILE"
 else
 	if [ "$state" = "running" ]; then
 		log 1 "Starting VE"
 		if ! logexec 2 $SSH root@$host vzctl start $VEID ; then
 			log 0 "Failed to start VE"
 			undo_copy_quota
 			exit $MIG_ERR_START_VPS
 		fi
 	elif [ "$mounted" = "mounted" ]; then
 		log 1 "Mounting VE"
 		if ! logexec 2 $SSH root@$host vzctl mount $VEID ; then
 			log 0 "Failed to mount VE"
 			undo_copy_quota
 			exit $MIG_ERR_MOUNT_VPS
 		fi
 	else
 		log 1 "Turning quota off"
 		if ! logexec 2 $SSH root@$host vzquota off $VEID ; then
 			log 0 "failed to turn quota off"
 			undo_copy_quota
 			exit $MIG_ERR_QUOTA
 		fi
 	fi

 	log 1 "Cleanup"
 fi

 if [ $remove_area -eq 1 ]; then
 	log 2 "Destroying VE"
 	logexec 2 vzctl destroy $VEID
 else
 	# Move config as veid.migrated to allow backward migration
 	mv -f $vpsconf $vpsconf.migrated
 fi
	#!/bin/bash
	#
	# vzmigrate is used for VE migration to another node
	# Copyright (C) 2000-2007 SWsoft. All rights reserved.
	#
	# This program is free software; you can redistribute it and/or
	# modify it under the terms of the GNU General Public License
	# as published by the Free Software Foundation; either version 2
	# of the License, or (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	#
	#
	# Usage:
	# vzmigrate [-r yes\|no] [--ssh=<options>] [--keep-dst] [--online] [-v]
	# destination_address VEID
	# Options:
	# -r, --remove-area yes\|no
	# Whether to remove VE on source HN for successfully migrated VE.
	# --ssh=<ssh options>
	# Additional options that will be passed to ssh while establishing
	# connection to destination HN. Please be careful with options
	# passed, DO NOT pass destination hostname.
	# --keep-dst
	# Do not clean synced destination VE private area in case of some
	# error. It makes sense to use this option on big VE migration to
	# avoid syncing VE private area again in case some error
	# (on VE stop for example) occurs during first migration attempt.
	# --online
	# Perform online (zero-downtime) migration: during the migration the
	# VE hangs for a while and after the migration it continues working
	# as though nothing has happened.
	# -v
	# Verbose mode. Causes vzmigrate to print debugging messages about
	# its progress (including some time statistics).
	#
	# Examples:
	# Online migration of VE #101 to foo.com:
	# vzmigrate --online foo.com 101
	# Migration of VE #102 to foo.com with downtime:
	# vzmigrate foo.com 102
	# NOTE:
	# This program uses ssh as a transport layer. You need to put ssh
	# public key to destination node and be able to connect without
	# entering a password.


	ACT_SCRIPTS_SFX="start stop mount umount"
	SSH_OPTIONS=""
	SSH="ssh $SSH_OPTIONS"
	SCP="scp $SSH_OPTIONS"

	online=0
	verbose=0
	remove_area=1
	keep_dst=0
	debug=0
	confdir="@PKGCONFDIR@/conf"
	vzconf="@PKGCONFDIR@/vz.conf"
	tmpdir="/var/tmp"
	act_scripts=

	# Errors:
	MIG_ERR_USAGE=1
	MIG_ERR_VPS_IS_STOPPED=2
	MIG_ERR_CANT_CONNECT=4
	MIG_ERR_COPY=6
	MIG_ERR_START_VPS=7
	MIG_ERR_STOP_SOURCE=8
	MIG_ERR_EXISTS=9
	MIG_ERR_NOEXIST=10
	MIG_ERR_IP_IN_USE=12
	MIG_ERR_QUOTA=13
	MIG_ERR_CHECKPOINT=$MIG_ERR_STOP_SOURCE
	MIG_ERR_MOUNT_VPS=$MIG_ERR_START_VPS
	MIG_ERR_RESTORE_VPS=$MIG_ERR_START_VPS
	MIG_ERR_OVZ_NOT_RUNNING=14
	MIG_ERR_APPLY_CONFIG=15

	usage() {
	cat <<EOF
	This program is used for VE migration to another node
	Usage:
	vzmigrate [-r yes\|no] [--ssh=<options>] [--keep-dst] [--online] [-v]
	destination_address <VEID>
	Options:
	-r, --remove-area yes\|no
	Whether to remove VE on source HN for successfully migrated VE.
	--ssh=<ssh options>
	Additional options that will be passed to ssh while establishing
	connection to destination HN. Please be careful with options
	passed, DO NOT pass destination hostname.
	--keep-dst
	Do not clean synced destination VE private area in case of some
	error. It makes sense to use this option on big VE migration to
	avoid syncing VE private area again in case some error
	(on VE stop for example) occurs during first migration attempt.
	--online
	Perform online (zero-downtime) migration: during the migration the
	VE hangs for a while and after the migration it continues working
	as though nothing has happened.
	-v
	Verbose mode. Causes vzmigrate to print debugging messages about
	its progress (including some time statistics).
	EOF
	exit $MIG_ERR_USAGE
	}

	# Logs message
	# There are 3 types of messages:
	# 0 - error messages (print to stderr)
	# 1 - normal messages (print to stdout)
	# 2 - debug messages (print to stdout if in verbose mode)
	log () {
	if [ $1 -eq 0 ]; then
	shift
	echo -e "Error: " $@ >&2
	elif [ $1 -eq 1 ]; then
	shift
	echo -e $@
	elif [ $verbose -eq 1 ]; then
	shift
	echo -e " " $@
	fi
	}

	# Executes command and returns result of execution
	# There are 2 types of execution:
	# 1 - normal execution (all output will be printed)
	# 2 - debug execution (output will be printed if verbose mode is set,
	# in other case stdout and stderr redirected to /dev/null)
	logexec () {
	if [ $1 -eq 1 -o $verbose -eq 1 ]; then
	shift
	$@
	else
	shift
	$@ &> /dev/null
	fi
	return $?
	}

	undo_conf () {
	$SSH "root@$host" "rm -f $vpsconf"
	}

	undo_act_scripts () {
	if [ -n "$act_scripts" ] ; then
	$SSH "root@$host" "rm -f $act_scripts"
	fi
	undo_conf
	}

	undo_private () {
	if [ $keep_dst -eq 0 ]; then
	$SSH "root@$host" "rm -rf $VE_PRIVATE"
	fi
	undo_act_scripts
	}

	undo_root () {
	$SSH "root@$host" "rm -rf $VE_ROOT"
	undo_private
	}

	undo_quota_init () {
	$SSH "root@$host" "vzquota drop $VEID"
	undo_root
	}

	undo_quota_on () {
	$SSH "root@$host" "vzquota off $VEID"
	undo_quota_init
	}

	undo_sync () {
	# Root will be destroed in undo_root
	undo_quota_on
	}

	undo_suspend () {
	logexec 2 vzctl chkpnt $VEID --resume
	undo_sync
	}

	undo_dump () {
	if [ $debug -eq 0 ]; then
	rm -f "$VE_DUMPFILE"
	fi
	undo_suspend
	}

	undo_copy_dump () {
	$SSH "root@$host" "rm -f $VE_DUMPFILE"
	undo_suspend
	}

	undo_stop () {
	if [ "$state" = "running" ]; then
	vzctl start $VEID
	elif [ "$mounted" = "mounted" ]; then
	vzctl mount $VEID
	fi
	undo_sync
	}

	undo_source_stage() {
	if [ $online -eq 1 ]; then
	undo_copy_dump
	else
	undo_stop
	fi
	}

	undo_quota_dump () {
	rm -f "$VE_QUOTADUMP"
	undo_source_stage
	}

	undo_copy_quota () {
	$SSH "root@$host" "rm -f $VE_QUOTADUMP"
	undo_quota_dump
	}

	undo_undump () {
	logexec 2 $SSH root@$host vzctl restore $VEID --kill
	undo_copy_quota
	}

	get_status() {
	exist=$3
	mounted=$4
	state=$5
	}

	get_time () {
	awk -v t2=$2 -v t1=$1 'BEGIN{print t2-t1}'
	}

	if [ $# -lt 2 ]; then
	usage
	fi

	while [ ! -z "$1" ]; do
	log 1 "OPT:$1"
	case "$1" in
	--online)
	online=1
	;;
	-v)
	verbose=1
	;;
	--remove-area\|-r)
	shift
	if [ "$1" = "yes" ]; then
	remove_area=1
	elif [ "$1" = "no" ]; then
	remove_area=0;
	else
	usage
	fi
	;;
	--keep-dst)
	keep_dst=1
	;;
	--ssh=*)
	SSH_OPTIONS="$SSH_OPTIONS $(echo $1 \| cut -c7-)"
	SSH="ssh $SSH_OPTIONS"
	SCP="scp $SSH_OPTIONS"
	;;
	*)
	break
	;;
	esac
	shift
	done

	host=$1
	shift
	VEID=$1
	shift

	if [ -z "$host" -o -z "$VEID" -o $# -ne 0 ]; then
	usage
	fi

	vpsconf="$confdir/$VEID.conf"

	if [ ! -r "$vzconf" -o ! -r "$vpsconf" ]; then
	log 0 "Can't read global config or VE #$VEID config file"
	exit $MIG_ERR_NOEXIST
	fi

	get_status $(vzctl status $VEID)
	if [ "$exist" = "deleted" ]; then
	log 0 "VE #$VEID doesn't exist"
	exit $MIG_ERR_NOEXIST
	fi

	if [ $online -eq 1 ]; then
	log 1 "Starting online migration of VE $VEID on $host"
	else
	log 1 "Starting migration of VE $VEID on $host"
	fi

	# Try to connect to destination
	if ! logexec 2 $SSH -o BatchMode=yes root@$host /bin/true; then
	log 0 "Can't connect to destination address using public key"
	log 0 "Please put your public key to destination node"
	exit $MIG_ERR_CANT_CONNECT
	fi

	# Check if OpenVZ is running
	if ! logexec 2 $SSH -o BatchMode=yes root@$host /etc/init.d/vz status ; then
	log 0 "OpenVZ is not running on the target machine"
	log 0 "Can't continue migration"
	exit $MIG_ERR_OVZ_NOT_RUNNING
	fi

	dst_exist=$($SSH "root@$host" "vzctl status $VEID" \| awk '{print $3}')
	if [ "$dst_exist" = "exist" ]; then
	log 0 "VE #$VEID already exists on destination node"
	exit $MIG_ERR_EXISTS
	fi

	if [ $online -eq 1 -a "$state" != "running" ]; then
	log 0 "Can't perform online migration of stopped VE"
	exit $MIG_ERR_VPS_IS_STOPPED
	fi

	log 2 "Loading $vzconf and $vpsconf files"

	. "$vzconf"
	. "$vpsconf"
	VE_DUMPFILE="$tmpdir/dump.$VEID"
	VE_QUOTADUMP="$tmpdir/quotadump.$VEID"

	log 2 "Check IPs on destination node: $IP_ADDRESS"
	for IP in $IP_ADDRESS; do
	if [ $($SSH "root@$host" "grep -c \" $IP \" /proc/vz/veip") -gt 0 ];
	then
	log 0 "IP address $IP already in use on destination node"
	exit $MIG_ERR_IP_IN_USE
	fi
	done

	log 1 "Preparing remote node"

	log 2 "Copying config file"
	if ! logexec 2 $SCP $vpsconf root@$host:$vpsconf ; then
	log 0 "Failed to copy config file"
	exit $MIG_ERR_COPY
	fi

	logexec 2 $SSH root@$host vzctl set $VEID --applyconfig_map name --save
	# vzctl return code 20 or 21 in case of unrecognized option
	if [[ $? != 20 && $? != 21 && $? != 0 ]]; then
	log 0 "Failed to apply config on destination node"
	undo_conf
	exit $MIG_ERR_APPLY_CONFIG
	fi

	for sfx in $ACT_SCRIPTS_SFX; do
	file="$confdir/$VEID.$sfx"
	if [ -f "$file" ]; then
	act_scripts="$act_scripts $file"
	fi
	done
	if [ -n "$act_scripts" ]; then
	log 2 "Copying action scripts"
	if ! logexec 2 $SCP $act_scripts root@$host:$confdir ; then
	log 0 "Failed to copy action scripts"
	undo_conf
	exit $MIG_ERR_COPY
	fi
	fi

	log 2 "Creating remote VE root dir"
	if ! $SSH "root@$host" "mkdir -p $VE_ROOT"; then
	log 0 "Failed to make VE root"
	undo_act_scripts
	exit $MIG_ERR_COPY
	fi

	log 2 "Creating remote VE private dir"
	if ! $SSH "root@$host" "mkdir -p $VE_PRIVATE"; then
	log 0 "Failed to make VE private area"
	undo_private
	exit $MIG_ERR_COPY
	fi

	log 1 "Initializing remote quota"

	log 2 "Quota init"
	if ! $SSH "root@$host" "vzctl quotainit $VEID"; then
	log 0 "Failed to initialize quota"
	undo_root
	exit $MIG_ERR_QUOTA
	fi

	log 2 "Turning remote quota on"
	if ! $SSH "root@$host" "vzctl quotaon $VEID"; then
	log 0 "Failed to turn quota on"
	undo_quota_init
	exit $MIG_ERR_QUOTA
	fi

	log 1 "Syncing private"
	if ! rsync -aH --delete --progress \
	"$VE_PRIVATE" "root@$host:${VE_PRIVATE%/*}" \| \
	grep "% of" \| awk -v ORS="\r" '{print $10}'; then
	log 0 "Failed to sync VE private areas"
	undo_quota_on
	exit $MIG_ERR_COPY
	fi

	if [ $online -eq 1 ]; then
	log 1 "Live migrating VE"

	log 2 "Suspending VE"
	time_suspend=$(date +%s.%N)
	if ! logexec 2 vzctl chkpnt $VEID --suspend ; then
	log 0 "Failed to suspend VE"
	undo_sync
	exit $MIG_ERR_CHECKPOINT
	fi

	log 2 "Dumping VE"
	if ! logexec 2 vzctl chkpnt $VEID --dump --dumpfile $VE_DUMPFILE ; then
	log 0 "Failed to dump VE"
	undo_suspend
	exit $MIG_ERR_CHECKPOINT
	fi

	log 2 "Copying dumpfile"
	time_copy_dump=$(date +%s.%N)
	if ! logexec 2 $SCP $VE_DUMPFILE root@$host:$VE_DUMPFILE ; then
	log 0 "Failed to copy dump"
	undo_dump
	exit $MIG_ERR_COPY
	fi
	else
	if [ "$state" = "running" ]; then
	log 1 "Stopping VE"
	if ! logexec 2 vzctl stop $VEID ; then
	log 0 "Failed to stop VE"
	undo_sync
	exit $MIG_ERR_STOP_SOURCE
	fi
	elif [ "$mounted" = "mounted" ]; then
	log 1 "Unmounting VE"
	if ! logexec 2 vzctl umount $VEID ; then
	log 0 "Failed to umount VE"
	undo_sync
	exit $MIG_ERR_STOP_SOURCE
	fi
	fi
	fi

	if [ "$state" = "running" ]; then
	log 2 "Syncing private (2nd pass)"
	time_rsync2=$(date +%s.%N)
	if ! rsync -aH --delete \
	"$VE_PRIVATE" "root@$host:${VE_PRIVATE%/*}"; then
	log 0 "Failed to sync VE private areas"
	undo_source_stage
	exit $MIG_ERR_COPY
	fi
	fi

	log 1 "Syncing 2nd level quota"

	log 2 "Dumping 2nd level quota"
	time_quota=$(date +%s.%N)
	if ! vzdqdump $VEID -U -G -T > "$VE_QUOTADUMP"; then
	log 0 "Failed to dump 2nd level quota"
	undo_quota_dump
	exit $MIG_ERR_QUOTA
	fi

	log 2 "Copying 2nd level quota"
	if ! logexec 2 $SCP $VE_QUOTADUMP root@$host:$VE_QUOTADUMP ; then
	log 0 "Failed to copy 2nd level quota dump"
	undo_quota_dump
	exit $MIG_ERR_COPY
	fi

	log 2 "Load 2nd level quota"
	if ! $SSH "root@$host" "(vzdqload $VEID -U -G -T < $VE_QUOTADUMP && \
	vzquota reload2 $VEID)"; then
	log 0 "Failed to load 2nd level quota"
	undo_copy_quota
	exit $MIG_ERR_QUOTA
	fi

	if [ $online -eq 1 ]; then
	log 2 "Undumping VE"
	time_undump=$(date +%s.%N)
	if ! logexec 2 $SSH root@$host vzctl restore $VEID --undump \
	--dumpfile $VE_DUMPFILE --skip_arpdetect ; then
	log 0 "Failed to undump VE"
	undo_copy_quota
	exit $MIG_ERR_RESTORE_VPS
	fi

	log 2 "Resuming VE"
	if ! logexec 2 $SSH root@$host vzctl restore $VEID --resume ; then
	log 0 "Failed to resume VE"
	undo_undump
	exit $MIG_ERR_RESTORE_VPS
	fi
	time_finish=$(date +%s.%N)
	log 2 "Times:"
	log 2 "\tSuspend + Dump:\t" $(get_time $time_suspend $time_copy_dump)
	log 2 "\tCopy dump file:\t" $(get_time $time_copy_dump $time_rsync2)
	log 2 "\tSecond rsync:\t" $(get_time $time_rsync2 $time_quota)
	log 2 "\t2nd level quota:\t" $(get_time $time_quota $time_undump)
	log 2 "\tUndump + Resume:\t" $(get_time $time_undump $time_finish)
	log 2 "Total time: " $(get_time $time_suspend $time_finish)

	log 1 "Cleanup"

	log 2 "Killing VE"
	logexec 2 vzctl chkpnt $VEID --kill
	logexec 2 vzctl umount $VEID

	log 2 "Removing dumpfiles"
	rm -f "$VE_DUMPFILE"
	$SSH "root@$host" "rm -f $VE_DUMPFILE"
	else
	if [ "$state" = "running" ]; then
	log 1 "Starting VE"
	if ! logexec 2 $SSH root@$host vzctl start $VEID ; then
	log 0 "Failed to start VE"
	undo_copy_quota
	exit $MIG_ERR_START_VPS
	fi
	elif [ "$mounted" = "mounted" ]; then
	log 1 "Mounting VE"
	if ! logexec 2 $SSH root@$host vzctl mount $VEID ; then
	log 0 "Failed to mount VE"
	undo_copy_quota
	exit $MIG_ERR_MOUNT_VPS
	fi
	else
	log 1 "Turning quota off"
	if ! logexec 2 $SSH root@$host vzquota off $VEID ; then
	log 0 "failed to turn quota off"
	undo_copy_quota
	exit $MIG_ERR_QUOTA
	fi
	fi

	log 1 "Cleanup"
	fi

	if [ $remove_area -eq 1 ]; then
	log 2 "Destroying VE"
	logexec 2 vzctl destroy $VEID
	else
	# Move config as veid.migrated to allow backward migration
	mv -f $vpsconf $vpsconf.migrated
	fi