TMUX(1) General Commands Manual TMUX(1)

tmux —
terminal multiplexer

tmux [-vV] [-f file] [-S socket-path] [command [flags]]

tmux is a terminal multiplexer; it enables a number of terminals (or windows) to be accessed and controlled from a single terminal.

tmux runs as a server-client system. A server is created automatically when necessary and holds a number of sessions, each of which may have a number of windows linked to it. Any number of clients may connect to a session, or the server may be controlled by issuing commands with tmux. Communication takes place through a socket, by default placed in /tmp.

The options are as follows:

Request verbose logging. This option may be specified multiple times for increasing verbosity. Log messages will be saved into tmux-client-PID.log and tmux-server-PID.log files in the current directory, where PID is the pid of the server or client process.
Print program version.
file
Specify an alternative configuration file. By default, tmux will look for a config file at ~/.tmux.conf.
socket-path
Specify an alternative path to the server socket. The default is /tmp/tmux-UID, where UID is the uid of the user who invoked tmux.
command [flags]
This specifies one of a set of commands used to control tmux, and described in the following sections. If no command and flags is specified, the new-session command is assumed.

To create a new tmux session running vi(1):

$ tmux new-session vi

Most commands have a shorter form, known as an alias. For new-session, this is new:

$ tmux new vi

Alternatively, the shortest unambiguous form of a command is accepted. If there are several options, they are listed:

$ tmux n
ambiguous command: n, could be: new-session, new-window, next-window
$

Within an active session, a new window may be created by typing ‘^B’ (ctrl-B, known as the prefix key) followed by the ‘c’ key.

Windows may be navigated with: ‘^B 0’ (to select window 0), ‘^B 1’ (to select window 1), and so on; ‘^B n’ to select the next window; and ‘^B p’ to select the previous window.

A session may be detached using ‘^B d’ and reattached with:

$ tmux attach-session

Typing ‘^B ?’ lists the current key bindings in the current window; up and down may be used to navigate the list or ‘Q’ to exit from it.

tmux may be controlled from an attached client by using a key combination of a prefix, ‘^B’ (ctrl-B) by default, followed by a command key.

Some of the default key bindings include:

‘d’
Detach current client.
‘c’
Create new window.
‘n’
Change to next window in the current session.
‘p’
Change to previous window in the current session.
‘l’
Move to last (previously selected) window in the current session.
‘?’
List current key bindings.

A complete list may be obtained with the list-keys command (bound to ‘?’ by default). Key bindings may be changed with the bind-key and unbind-key commands.

tmux maintains a configurable history buffer for each window. By default, up to 2000 lines are kept, this can be altered with the history-limit option (see the set-option command below).

A tmux window may be in one of several modes. The default permits direct access to the terminal attached to the window. The others are:
output mode
This is entered when a command which produces output, such as list-keys, is executed from a key binding. The ‘up’, ‘down’, ‘page-up’ and ‘page-down’ keys or vi(1) style ‘j’ and ‘k’ keys may be used to scroll the output up and down. The ‘q’ key will exit output mode.
scroll mode
This is entered with the scroll-mode command (bound to ‘=’ by default) and permits the window history buffer to be inspected. In addition to the commands supported by output mode, the left and right arrow keys, or ‘h’ and ‘l’, will scroll left and right.
copy mode
This permits a section of a window or its history to be copied to the paste buffer for later insertion into another window. The navigation keys move the cursor around the window, scrolling as necessary. In addition, ‘^A’ and ‘^E’ (or the vi(1) style ‘0’ and ‘$’ keys) move to the start and end of the line; the space key begins a selection; and the enter key or ‘^W’ copies the selection to the paste buffer and exits copy mode.

This mode is entered with the copy-mode command, bound to [‘’ by default.

This section contains a list of the commands supported by tmux. There are some flags shared by several commands; these are:
client-tty
Apply command to the client on the given tty. Clients may be listed with the list-clients command.
session-name
Apply command to the session named session-name. If it is omitted and tmux is invoked from a running tmux client, the session containing the client is connected to will be used; otherwise, if only one session exists, it is chosen, or if multiple sessions exist, an error is generated.

The following commands are available:

[-d] [-t target-session]
(alias: attach)
Create a new client in the current terminal and attach it to a session. If -d is specified, any other clients attached to the session are detached.
key command [arguments]
(alias: bind)
Bind key key to command.
[-t target-window]
Enter copy mode.
[-t target-client]
(alias: detach)
Detach the current client if bound to a key, or the specified client with -t.
[-t target-session]
(alias: has)
Report an error and exit with 1 if the specified session does not exist. If it does exist, exit with 0.
Kill the tmux server and clients and destroy all sessions.
[-t target-session]
Destroy the given session, closing any windows linked to it and no other sessions, and detaching all clients attached to it.
[-t target-window]
(alias: killw)
Kill the current window or the window at target-window, removing it from any sessions to which it is linked.
[-t target-session]
(alias: last)
Select the last (previously selected) window. If no target-session is specified, select to the last window of the current session.
[-dk] [-s src-window] [-t dst-window]
(alias: linkw)
Link the window at src-window to the specified dst-window. If dst-window is specified and no such window exists, the src-window is linked there. If -k is given and dst-window exists, it is killed, otherwise an error is generated. If -d is given, the newly linked window is not selected.
(alias: lsc)
List all clients attached to the server.
(alias: lsk)
List all key bindings.
(alias: ls)
List all sessions managed by the server.
[-t target-session]
(alias: lsw)
List windows in the current session or in target-session.
[-d] [-s session-name] [-n window-name] [command]
(alias: new)
Create a new session with name session-name. The new session is attached to the current terminal unless -d is given. window-name and command are the name of and command to execute in the initial window.
[-d] [-t target-window] [-n window-name] [command]
(alias: neww)
Create a new window. If -d is given, the session does not make the new window the current window. target-window represents the window to be created. command is the command to execute. If command is not specified, the default command is used.

The TERM environment variable must be set to “screen” for all programs running inside tmux. New windows will automatically have “TERM=screen” added to their environment, but care must be taken not to reset this in shell start-up files.

[-t target-session]
(alias: next)
Move to the next window in the session.
[-t target-window]
(alias: paste)
Insert the contents of the paste buffer into the current window. Ignored unless executed via a key binding.
[-t target-session]
(alias: prev)
Move to the previous window in the session.
[-t target-client]
(alias: refresh)
Refresh the current client if bound to a key, or a single client if one is given with -t.
[-t target-session] new-name
(alias: rename)
Rename the session to new-name.
[-t target-window] new-name
(alias: renamew)
Rename the current window, or the window at target-window if specifed, to new-name.
[-t target-window]
Enter scroll mode.
[-t target-window]
(alias: selectw)
Select the window at target-window.
[-t target-window] key ...
Send a key or keys to a window. Each argument key is the name of the key (such as ‘^A’ or ‘npage’ ) to send; if the string is not recognised as a key, it is sent as a series of characters. All arguments are sent sequentially from first to last.
[-t target-window]
Send the prefix key to a window as if it was pressed.
[-t target-window] option value
(alias: set)
Set an option. Possible options are:
[any | none | current]
Set action on window bell. any means a bell in any window linked to a session causes a bell in the current window of that session, none means all bells are ignored and current means only bell in windows other than the current window are ignored.
command
Sets the command used for new windows (if not specified when the window is created) to command. The default is “exec $SHELL”.
lines
Set the maximum number of lines held in window history. This setting applies only to new windows - existing window histories are not resized and retain the limit at the point they were created.
key
Set the current prefix key.
[on | off]
Show or hide the status line.
colour
Set status line background colour, where colour is one of: black, red, green, yellow, blue, magenta, cyan, white or default.
colour
Set status line foreground colour.
Start the tmux server, if not already running, without creating any sessions.
[-d] [-s src-window] [-t dst-window]
(alias: swapw)
This is similar to link-window, except the source and destination windows are swapped. It is an error if no window exists at src-window.
key
(alias: unbind)
Unbind the key bound to key.
[-t target-window]
(alias: unlinkw)
Unlink target-window. A window may be unlinked only if it is linked to multiple sessions - windows may not be linked to no sessions.

pty(4)

Nicholas Marriott ⟨nicm@users.sourceforge.net⟩
November 9, 2007 BSD