| # configure.ac |
| |
| AC_INIT([tmux], 3.2-rc) |
| AC_PREREQ([2.60]) |
| |
| AC_CONFIG_AUX_DIR(etc) |
| AC_CONFIG_LIBOBJ_DIR(compat) |
| AM_INIT_AUTOMAKE([foreign subdir-objects]) |
| |
| AC_CANONICAL_HOST |
| |
| # When CFLAGS isn't set at this stage and gcc is detected by the macro below, |
| # autoconf will automatically use CFLAGS="-O2 -g". Prevent that by using an |
| # empty default. |
| : ${CFLAGS=""} |
| |
| # Save user CPPFLAGS, CFLAGS and LDFLAGS. We need to change them because |
| # AC_CHECK_HEADER doesn't give us any other way to update the include |
| # paths. But for Makefile.am we want to use AM_CPPFLAGS and friends. |
| SAVED_CFLAGS="$CFLAGS" |
| SAVED_CPPFLAGS="$CPPFLAGS" |
| SAVED_LDFLAGS="$LDFLAGS" |
| |
| # Set up the compiler in two different ways and say yes we may want to install. |
| AC_PROG_CC |
| AM_PROG_CC_C_O |
| AC_PROG_CC_C99 |
| AC_PROG_CPP |
| AC_PROG_EGREP |
| AC_PROG_INSTALL |
| AC_PROG_YACC |
| PKG_PROG_PKG_CONFIG |
| AC_USE_SYSTEM_EXTENSIONS |
| |
| # Default tmux.conf goes in /etc not ${prefix}/etc. |
| test "$sysconfdir" = '${prefix}/etc' && sysconfdir=/etc |
| |
| # Is this --enable-debug? |
| case "x$VERSION" in xnext*) enable_debug=yes;; esac |
| AC_ARG_ENABLE( |
| debug, |
| AC_HELP_STRING(--enable-debug, enable debug build flags), |
| ) |
| AM_CONDITIONAL(IS_DEBUG, test "x$enable_debug" = xyes) |
| |
| # Is this a static build? |
| AC_ARG_ENABLE( |
| static, |
| AC_HELP_STRING(--enable-static, create a static build) |
| ) |
| if test "x$enable_static" = xyes; then |
| test "x$PKG_CONFIG" != x && PKG_CONFIG="$PKG_CONFIG --static" |
| AM_LDFLAGS="-static $AM_LDFLAGS" |
| LDFLAGS="$AM_LDFLAGS $SAVED_LDFLAGS" |
| fi |
| |
| # Is this gcc? |
| AM_CONDITIONAL(IS_GCC, test "x$GCC" = xyes) |
| |
| # Is this Sun CC? |
| AC_EGREP_CPP( |
| yes, |
| [ |
| #ifdef __SUNPRO_C |
| yes |
| #endif |
| ], |
| found_suncc=yes, |
| found_suncc=no |
| ) |
| AM_CONDITIONAL(IS_SUNCC, test "x$found_suncc" = xyes) |
| |
| # Check for various headers. Alternatives included from compat.h. |
| AC_CHECK_HEADERS([ \ |
| bitstring.h \ |
| dirent.h \ |
| fcntl.h \ |
| inttypes.h \ |
| libutil.h \ |
| ndir.h \ |
| paths.h \ |
| pty.h \ |
| stdint.h \ |
| sys/dir.h \ |
| sys/ndir.h \ |
| sys/tree.h \ |
| util.h \ |
| ]) |
| |
| # Look for sys_signame. |
| AC_SEARCH_LIBS(sys_signame, , AC_DEFINE(HAVE_SYS_SIGNAME)) |
| |
| # Look for fmod. |
| AC_CHECK_LIB(m, fmod) |
| |
| # Look for library needed for flock. |
| AC_SEARCH_LIBS(flock, bsd) |
| |
| # Check for functions that are replaced or omitted. |
| AC_CHECK_FUNCS([ \ |
| dirfd \ |
| flock \ |
| prctl \ |
| sysconf \ |
| ]) |
| |
| # Check for functions with a compatibility implementation. |
| AC_REPLACE_FUNCS([ \ |
| asprintf \ |
| cfmakeraw \ |
| closefrom \ |
| explicit_bzero \ |
| fgetln \ |
| freezero \ |
| getdtablecount \ |
| getline \ |
| getprogname \ |
| memmem \ |
| recallocarray \ |
| reallocarray \ |
| setenv \ |
| setproctitle \ |
| strcasestr \ |
| strlcat \ |
| strlcpy \ |
| strndup \ |
| strsep \ |
| strtonum \ |
| ]) |
| AC_FUNC_STRNLEN |
| |
| # Look for clock_gettime. Must come before event_init. |
| AC_SEARCH_LIBS(clock_gettime, rt) |
| |
| # Always use our getopt because 1) glibc's doesn't enforce argument order 2) |
| # musl does not set optarg to NULL for flags without arguments (although it is |
| # not required to, but it is helpful) 3) there are probably other weird |
| # implementations. |
| AC_LIBOBJ(getopt) |
| |
| # Look for libevent. |
| PKG_CHECK_MODULES( |
| LIBEVENT, |
| libevent, |
| [ |
| AM_CFLAGS="$LIBEVENT_CFLAGS $AM_CFLAGS" |
| CFLAGS="$AM_CFLAGS $SAVED_CFLAGS" |
| LIBS="$LIBEVENT_LIBS $LIBS" |
| found_libevent=yes |
| ], |
| [ |
| AC_SEARCH_LIBS( |
| event_init, |
| [event event-1.4 event2], |
| found_libevent=yes, |
| found_libevent=no |
| ) |
| ] |
| ) |
| AC_CHECK_HEADER( |
| event.h, |
| , |
| found_libevent=no |
| ) |
| if test "x$found_libevent" = xno; then |
| AC_MSG_ERROR("libevent not found") |
| fi |
| |
| # Look for ncurses. |
| PKG_CHECK_MODULES( |
| LIBTINFO, |
| tinfo, |
| found_ncurses=yes, |
| found_ncurses=no |
| ) |
| if test "x$found_ncurses" = xno; then |
| PKG_CHECK_MODULES( |
| LIBNCURSES, |
| ncurses, |
| found_ncurses=yes, |
| found_ncurses=no |
| ) |
| fi |
| if test "x$found_ncurses" = xno; then |
| PKG_CHECK_MODULES( |
| LIBNCURSES, |
| ncursesw, |
| found_ncurses=yes, |
| found_ncurses=no |
| ) |
| fi |
| if test "x$found_ncurses" = xyes; then |
| AM_CFLAGS="$LIBNCURSES_CFLAGS $LIBTINFO_CFLAGS $AM_CFLAGS" |
| CFLAGS="$LIBNCURSES_CFLAGS $LIBTINFO_CFLAGS $CFLAGS" |
| LIBS="$LIBNCURSES_LIBS $LIBTINFO_LIBS $LIBS" |
| else |
| # pkg-config didn't work, try ncurses. |
| AC_CHECK_LIB( |
| tinfo, |
| setupterm, |
| found_ncurses=yes, |
| found_ncurses=no |
| ) |
| if test "x$found_ncurses" = xno; then |
| AC_CHECK_LIB( |
| ncurses, |
| setupterm, |
| found_ncurses=yes, |
| found_ncurses=no |
| ) |
| fi |
| if test "x$found_ncurses" = xyes; then |
| AC_CHECK_HEADER( |
| ncurses.h, |
| LIBS="$LIBS -lncurses", |
| found_ncurses=no) |
| fi |
| fi |
| if test "x$found_ncurses" = xyes; then |
| AC_DEFINE(HAVE_NCURSES_H) |
| else |
| # No ncurses, try curses. |
| AC_CHECK_LIB( |
| curses, |
| setupterm, |
| found_curses=yes, |
| found_curses=no |
| ) |
| AC_CHECK_HEADER( |
| curses.h, |
| , |
| found_curses=no) |
| if test "x$found_curses" = xyes; then |
| LIBS="$LIBS -lcurses" |
| AC_DEFINE(HAVE_CURSES_H) |
| else |
| AC_MSG_ERROR("curses not found") |
| fi |
| fi |
| |
| # Look for utempter. |
| AC_ARG_ENABLE( |
| utempter, |
| AC_HELP_STRING(--enable-utempter, use utempter if it is installed) |
| ) |
| if test "x$enable_utempter" = xyes; then |
| AC_CHECK_HEADER(utempter.h, enable_utempter=yes, enable_utempter=no) |
| if test "x$enable_utempter" = xyes; then |
| AC_SEARCH_LIBS( |
| utempter_add_record, |
| utempter, |
| enable_utempter=yes, |
| enable_utempter=no |
| ) |
| fi |
| if test "x$enable_utempter" = xyes; then |
| AC_DEFINE(HAVE_UTEMPTER) |
| else |
| AC_MSG_ERROR("utempter not found") |
| fi |
| fi |
| |
| # Look for utf8proc. |
| AC_ARG_ENABLE( |
| utf8proc, |
| AC_HELP_STRING(--enable-utf8proc, use utf8proc if it is installed) |
| ) |
| if test "x$enable_utf8proc" = xyes; then |
| AC_CHECK_HEADER(utf8proc.h, enable_utf8proc=yes, enable_utf8proc=no) |
| if test "x$enable_utf8proc" = xyes; then |
| AC_SEARCH_LIBS( |
| utf8proc_charwidth, |
| utf8proc, |
| enable_utf8proc=yes, |
| enable_utf8proc=no |
| ) |
| fi |
| if test "x$enable_utf8proc" = xyes; then |
| AC_DEFINE(HAVE_UTF8PROC) |
| else |
| AC_MSG_ERROR("utf8proc not found") |
| fi |
| fi |
| AM_CONDITIONAL(HAVE_UTF8PROC, [test "x$enable_utf8proc" = xyes]) |
| |
| # Check for b64_ntop. If we have b64_ntop, we assume b64_pton as well. |
| AC_MSG_CHECKING(for b64_ntop) |
| AC_TRY_LINK( |
| [ |
| #include <sys/types.h> |
| #include <netinet/in.h> |
| #include <resolv.h> |
| ], |
| [b64_ntop(NULL, 0, NULL, 0);], |
| found_b64_ntop=yes, |
| found_b64_ntop=no |
| ) |
| if test "x$found_b64_ntop" = xno; then |
| AC_MSG_RESULT(no) |
| |
| AC_MSG_CHECKING(for b64_ntop with -lresolv) |
| OLD_LIBS="$LIBS" |
| LIBS="$LIBS -lresolv" |
| AC_TRY_LINK( |
| [ |
| #include <sys/types.h> |
| #include <netinet/in.h> |
| #include <resolv.h> |
| ], |
| [b64_ntop(NULL, 0, NULL, 0);], |
| found_b64_ntop=yes, |
| found_b64_ntop=no |
| ) |
| if test "x$found_b64_ntop" = xno; then |
| LIBS="$OLD_LIBS" |
| AC_MSG_RESULT(no) |
| fi |
| fi |
| if test "x$found_b64_ntop" = xyes; then |
| AC_DEFINE(HAVE_B64_NTOP) |
| AC_MSG_RESULT(yes) |
| else |
| AC_LIBOBJ(base64) |
| fi |
| |
| # Look for networking libraries. |
| AC_SEARCH_LIBS(inet_ntoa, nsl) |
| AC_SEARCH_LIBS(socket, socket) |
| AC_CHECK_LIB(xnet, socket) |
| |
| # Check for CMSG_DATA. Some platforms require _XOPEN_SOURCE_EXTENDED (for |
| # example see xopen_networking(7) on HP-UX). |
| XOPEN_DEFINES= |
| AC_MSG_CHECKING(for CMSG_DATA) |
| AC_EGREP_CPP( |
| yes, |
| [ |
| #include <sys/socket.h> |
| #ifdef CMSG_DATA |
| yes |
| #endif |
| ], |
| found_cmsg_data=yes, |
| found_cmsg_data=no |
| ) |
| AC_MSG_RESULT($found_cmsg_data) |
| if test "x$found_cmsg_data" = xno; then |
| AC_MSG_CHECKING(if CMSG_DATA needs _XOPEN_SOURCE_EXTENDED) |
| AC_EGREP_CPP( |
| yes, |
| [ |
| #define _XOPEN_SOURCE 1 |
| #define _XOPEN_SOURCE_EXTENDED 1 |
| #include <sys/socket.h> |
| #ifdef CMSG_DATA |
| yes |
| #endif |
| ], |
| found_cmsg_data=yes, |
| found_cmsg_data=no |
| ) |
| AC_MSG_RESULT($found_cmsg_data) |
| if test "x$found_cmsg_data" = xyes; then |
| XOPEN_DEFINES="-D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED" |
| else |
| AC_MSG_ERROR("CMSG_DATA not found") |
| fi |
| fi |
| AC_SUBST(XOPEN_DEFINES) |
| |
| # Look for err and friends in err.h. |
| AC_CHECK_FUNC(err, found_err_h=yes, found_err_h=no) |
| AC_CHECK_FUNC(errx, , found_err_h=no) |
| AC_CHECK_FUNC(warn, , found_err_h=no) |
| AC_CHECK_FUNC(warnx, , found_err_h=no) |
| if test "x$found_err_h" = xyes; then |
| AC_CHECK_HEADER(err.h, , found_err_h=no) |
| else |
| AC_LIBOBJ(err) |
| fi |
| |
| # Look for imsg_init in libutil. |
| AC_SEARCH_LIBS(imsg_init, util, found_imsg_init=yes, found_imsg_init=no) |
| if test "x$found_imsg_init" = xyes; then |
| AC_DEFINE(HAVE_IMSG) |
| else |
| AC_LIBOBJ(imsg) |
| AC_LIBOBJ(imsg-buffer) |
| fi |
| |
| # Look for daemon, compat/daemon.c used if missing. Solaris 10 has it in |
| # libresolv, but no declaration anywhere, so check for declaration as well as |
| # function. |
| AC_CHECK_FUNC(daemon, found_daemon=yes, found_daemon=no) |
| AC_CHECK_DECL( |
| daemon, |
| , |
| found_daemon=no, |
| [ |
| #include <stdlib.h> |
| #include <unistd.h> |
| ] |
| ) |
| if test "x$found_daemon" = xyes; then |
| AC_DEFINE(HAVE_DAEMON) |
| else |
| AC_LIBOBJ(daemon) |
| fi |
| |
| # Look for stravis, compat/{vis,unvis}.c used if missing. |
| AC_CHECK_FUNC(stravis, found_stravis=yes, found_stravis=no) |
| if test "x$found_stravis" = xyes; then |
| AC_MSG_CHECKING(if strnvis is broken) |
| AC_EGREP_HEADER([strnvis\(char \*, const char \*, size_t, int\)], |
| vis.h, |
| AC_MSG_RESULT(no), |
| [found_stravis=no]) |
| if test "x$found_stravis" = xno; then |
| AC_MSG_RESULT(yes) |
| fi |
| fi |
| if test "x$found_stravis" = xyes; then |
| AC_CHECK_DECL( |
| VIS_DQ, |
| , |
| found_stravis=no, |
| [ |
| #include <stdlib.h> |
| #include <vis.h> |
| ] |
| ) |
| fi |
| if test "x$found_stravis" = xyes; then |
| AC_DEFINE(HAVE_VIS) |
| else |
| AC_LIBOBJ(vis) |
| AC_LIBOBJ(unvis) |
| fi |
| |
| # Look for fdforkpty and forkpty in libutil. |
| AC_SEARCH_LIBS(fdforkpty, util, found_fdforkpty=yes, found_fdforkpty=no) |
| if test "x$found_fdforkpty" = xyes; then |
| AC_DEFINE(HAVE_FDFORKPTY) |
| else |
| AC_LIBOBJ(fdforkpty) |
| fi |
| AC_SEARCH_LIBS(forkpty, util, found_forkpty=yes, found_forkpty=no) |
| if test "x$found_forkpty" = xyes; then |
| AC_DEFINE(HAVE_FORKPTY) |
| fi |
| AM_CONDITIONAL(NEED_FORKPTY, test "x$found_forkpty" = xno) |
| |
| # Look for kinfo_getfile in libutil. |
| AC_SEARCH_LIBS(kinfo_getfile, [util util-freebsd]) |
| |
| # Look for a suitable queue.h. |
| AC_CHECK_DECL( |
| TAILQ_CONCAT, |
| found_queue_h=yes, |
| found_queue_h=no, |
| [#include <sys/queue.h>] |
| ) |
| AC_CHECK_DECL( |
| TAILQ_PREV, |
| found_queue_h=yes, |
| found_queue_h=no, |
| [#include <sys/queue.h>] |
| ) |
| AC_CHECK_DECL( |
| TAILQ_REPLACE, |
| , |
| found_queue_h=no, |
| [#include <sys/queue.h>] |
| ) |
| if test "x$found_queue_h" = xyes; then |
| AC_DEFINE(HAVE_QUEUE_H) |
| fi |
| |
| # Look for __progname. |
| AC_MSG_CHECKING(for __progname) |
| AC_LINK_IFELSE([AC_LANG_SOURCE( |
| [ |
| #include <stdio.h> |
| #include <stdlib.h> |
| extern char *__progname; |
| int main(void) { |
| const char *cp = __progname; |
| printf("%s\n", cp); |
| exit(0); |
| } |
| ])], |
| [AC_DEFINE(HAVE___PROGNAME) AC_MSG_RESULT(yes)], |
| AC_MSG_RESULT(no) |
| ) |
| |
| # Look for program_invocation_short_name. |
| AC_MSG_CHECKING(for program_invocation_short_name) |
| AC_LINK_IFELSE([AC_LANG_SOURCE( |
| [ |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| int main(void) { |
| const char *cp = program_invocation_short_name; |
| printf("%s\n", cp); |
| exit(0); |
| } |
| ])], |
| [AC_DEFINE(HAVE_PROGRAM_INVOCATION_SHORT_NAME) AC_MSG_RESULT(yes)], |
| AC_MSG_RESULT(no) |
| ) |
| |
| # Look for prctl(PR_SET_NAME). |
| AC_CHECK_DECL( |
| PR_SET_NAME, |
| AC_DEFINE(HAVE_PR_SET_NAME), |
| , |
| [#include <sys/prctl.h>] |
| ) |
| |
| # Look for fcntl(F_CLOSEM). |
| AC_CHECK_DECL( |
| F_CLOSEM, |
| AC_DEFINE(HAVE_FCNTL_CLOSEM), |
| , |
| [#include <fcntl.h>] |
| ) |
| |
| # Look for /proc/$$. |
| AC_MSG_CHECKING(for /proc/\$\$) |
| if test -d /proc/$$; then |
| AC_DEFINE(HAVE_PROC_PID) |
| AC_MSG_RESULT(yes) |
| else |
| AC_MSG_RESULT(no) |
| fi |
| |
| # Man page defaults to mdoc. |
| MANFORMAT=mdoc |
| AC_SUBST(MANFORMAT) |
| |
| # Figure out the platform. |
| AC_MSG_CHECKING(platform) |
| case "$host_os" in |
| *aix*) |
| AC_MSG_RESULT(aix) |
| PLATFORM=aix |
| ;; |
| *darwin*) |
| AC_MSG_RESULT(darwin) |
| PLATFORM=darwin |
| # |
| # OS X CMSG_FIRSTHDR is broken, so redefine it with a working |
| # one. daemon works but has some stupid side effects, so use |
| # our internal version which has a workaround. |
| # |
| AC_DEFINE(BROKEN_CMSG_FIRSTHDR) |
| AC_LIBOBJ(daemon) |
| AC_LIBOBJ(daemon-darwin) |
| ;; |
| *dragonfly*) |
| AC_MSG_RESULT(dragonfly) |
| PLATFORM=dragonfly |
| ;; |
| *linux*) |
| AC_MSG_RESULT(linux) |
| PLATFORM=linux |
| ;; |
| *freebsd*) |
| AC_MSG_RESULT(freebsd) |
| PLATFORM=freebsd |
| ;; |
| *netbsd*) |
| AC_MSG_RESULT(netbsd) |
| PLATFORM=netbsd |
| ;; |
| *openbsd*) |
| AC_MSG_RESULT(openbsd) |
| PLATFORM=openbsd |
| ;; |
| *sunos*) |
| AC_MSG_RESULT(sunos) |
| PLATFORM=sunos |
| ;; |
| *solaris*) |
| AC_MSG_RESULT(sunos) |
| PLATFORM=sunos |
| case `/usr/bin/nroff --version 2>&1` in |
| *GNU*) |
| # Solaris 11.4 and later use GNU groff. |
| MANFORMAT=mdoc |
| ;; |
| *) |
| # Solaris 2.0 to 11.3 use AT&T nroff. |
| MANFORMAT=man |
| ;; |
| esac |
| ;; |
| *hpux*) |
| AC_MSG_RESULT(hpux) |
| PLATFORM=hpux |
| ;; |
| *cygwin*|*msys*) |
| AC_MSG_RESULT(cygwin) |
| PLATFORM=cygwin |
| ;; |
| *) |
| AC_MSG_RESULT(unknown) |
| PLATFORM=unknown |
| ;; |
| esac |
| AC_SUBST(PLATFORM) |
| AM_CONDITIONAL(IS_AIX, test "x$PLATFORM" = xaix) |
| AM_CONDITIONAL(IS_DARWIN, test "x$PLATFORM" = xdarwin) |
| AM_CONDITIONAL(IS_DRAGONFLY, test "x$PLATFORM" = xdragonfly) |
| AM_CONDITIONAL(IS_LINUX, test "x$PLATFORM" = xlinux) |
| AM_CONDITIONAL(IS_FREEBSD, test "x$PLATFORM" = xfreebsd) |
| AM_CONDITIONAL(IS_NETBSD, test "x$PLATFORM" = xnetbsd) |
| AM_CONDITIONAL(IS_OPENBSD, test "x$PLATFORM" = xopenbsd) |
| AM_CONDITIONAL(IS_SUNOS, test "x$PLATFORM" = xsunos) |
| AM_CONDITIONAL(IS_HPUX, test "x$PLATFORM" = xhpux) |
| AM_CONDITIONAL(IS_UNKNOWN, test "x$PLATFORM" = xunknown) |
| |
| # Save our CFLAGS/CPPFLAGS/LDFLAGS for the Makefile and restore the old user |
| # variables. |
| AC_SUBST(AM_CPPFLAGS) |
| CPPFLAGS="$SAVED_CPPFLAGS" |
| AC_SUBST(AM_CFLAGS) |
| CFLAGS="$SAVED_CFLAGS" |
| AC_SUBST(AM_LDFLAGS) |
| LDFLAGS="$SAVED_LDFLAGS" |
| |
| # autoconf should create a Makefile. |
| AC_OUTPUT(Makefile) |