docs/UIDS-GIDS.md - systemd-stable - Rivoreo Source Code Repositories

 ---
 title: Users, Groups, UIDs and GIDs on systemd Systems
 category: Users, Groups and Home Directories
 layout: default
 ---

 # Users, Groups, UIDs and GIDs on systemd Systems

 Here's a summary of the requirements `systemd` (and Linux) make on UID/GID
 assignments and their ranges.

 Note that while in theory UIDs and GIDs are orthogonal concepts they really
 aren't IRL. With that in mind, when we discuss UIDs below it should be assumed
 that whatever we say about UIDs applies to GIDs in mostly the same way, and all
 the special assignments and ranges for UIDs always have mostly the same
 validity for GIDs too.

 ## Special Linux UIDs

 In theory, the range of the C type `uid_t` is 32bit wide on Linux,
 i.e. 0…4294967295. However, four UIDs are special on Linux:

 1. 0 → The `root` super-user

 2. 65534 → The `nobody` UID, also called the "overflow" UID or similar. It's
    where various subsystems map unmappable users to, for example file systems
    only supporting 16bit UIDs, NFS or user namespacing. (The latter can be
    changed with a sysctl during runtime, but that's not supported on
    `systemd`. If you do change it you void your warranty.) Because Fedora is a
    bit confused the `nobody` user is called `nfsnobody` there (and they have a
    different `nobody` user at UID 99). I hope this will be corrected eventually
    though. (Also, some distributions call the `nobody` group `nogroup`. I wish
    they didn't.)

 3. 4294967295, aka "32bit `(uid_t) -1`" → This UID is not a valid user ID, as
    `setresuid()`, `chown()` and friends treat -1 as a special request to not
    change the UID of the process/file. This UID is hence not available for
    assignment to users in the user database.

 4. 65535, aka "16bit `(uid_t) -1`" → Before Linux kernel 2.4 `uid_t` used to be
    16bit, and programs compiled for that would hence assume that `(uid_t) -1`
    is 65535. This UID is hence not usable either.

 The `nss-systemd` glibc NSS module will synthesize user database records for
 the UIDs 0 and 65534 if the system user database doesn't list them. This means
 that any system where this module is enabled works to some minimal level
 without `/etc/passwd`.

 ## Special Distribution UID ranges

 Distributions generally split the available UID range in two:

 1. 1…999 → System users. These are users that do not map to actual "human"
    users, but are used as security identities for system daemons, to implement
    privilege separation and run system daemons with minimal privileges.

 2. 1000…65533 and 65536…4294967294 → Everything else, i.e. regular (human) users.

 Note that most distributions allow changing the boundary between system and
 regular users, even during runtime as user configuration. Moreover, some older
 systems placed the boundary at 499/500, or even 99/100. In `systemd`, the
 boundary is configurable only during compilation time, as this should be a
 decision for distribution builders, not for users. Moreover, we strongly
 discourage downstreams to change the boundary from the upstream default of
 999/1000.

 Also note that programs such as `adduser` tend to allocate from a subset of the
 available regular user range only, usually 1000..60000. And it's also usually
 user-configurable, too.

 Note that systemd requires that system users and groups are resolvable without
 networking available — a requirement that is not made for regular users. This
 means regular users may be stored in remote LDAP or NIS databases, but system
 users may not (except when there's a consistent local cache kept, that is
 available during earliest boot, including in the initial RAM disk).

 ## Special `systemd` GIDs

 `systemd` defines no special UIDs beyond what Linux already defines (see
 above). However, it does define some special group/GID assignments, which are
 primarily used for `systemd-udevd`'s device management. The precise list of the
 currently defined groups is found in this `sysusers.d` snippet:
 [basic.conf](https://raw.githubusercontent.com/systemd/systemd/master/sysusers.d/basic.conf.in)

 It's strongly recommended that downstream distributions include these groups in
 their default group databases.

 Note that the actual GID numbers assigned to these groups do not have to be
 constant beyond a specific system. There's one exception however: the `tty`
 group must have the GID 5. That's because it must be encoded in the `devpts`
 mount parameters during earliest boot, at a time where NSS lookups are not
 possible. (Note that the actual GID can be changed during `systemd` build time,
 but downstreams are strongly advised against doing that.)

 ## Special `systemd` UID ranges

 `systemd` defines a number of special UID ranges:

 1. 60001…60513 → UIDs for home directories managed by
    [`systemd-homed.service(8)`](https://www.freedesktop.org/software/systemd/man/systemd-homed.service.html). UIDs
    from this range are automatically assigned to any home directory discovered,
    and persisted locally on first login. On different systems the same user
    might get different UIDs assigned in case of conflict, though it is
    attempted to make UID assignments stable, by deriving them from a hash of
    the user name.

 2. 61184…65519 → UIDs for dynamic users are allocated from this range (see the
    `DynamicUser=` documentation in
    [`systemd.exec(5)`](https://www.freedesktop.org/software/systemd/man/systemd.exec.html)). This
    range has been chosen so that it is below the 16bit boundary (i.e. below
    65535), in order to provide compatibility with container environments that
    assign a 64K range of UIDs to containers using user namespacing. This range
    is above the 60000 boundary, so that its allocations are unlikely to be
    affected by `adduser` allocations (see above). And we leave some room
    upwards for other purposes. (And if you wonder why precisely these numbers:
    if you write them in hexadecimal, they might make more sense: 0xEF00 and
    0xFFEF). The `nss-systemd` module will synthesize user records implicitly
    for all currently allocated dynamic users from this range. Thus, NSS-based
    user record resolving works correctly without those users being in
    `/etc/passwd`.

 3. 524288…1879048191 → UID range for `systemd-nspawn`'s automatic allocation of
    per-container UID ranges. When the `--private-users=pick` switch is used (or
    `-U`) then it will automatically find a so far unused 16bit subrange of this
    range and assign it to the container. The range is picked so that the upper
    16bit of the 32bit UIDs are constant for all users of the container, while
    the lower 16bit directly encode the 65536 UIDs assigned to the
    container. This mode of allocation means that the upper 16bit of any UID
    assigned to a container are kind of a "container ID", while the lower 16bit
    directly expose the container's own UID numbers. If you wonder why precisely
    these numbers, consider them in hexadecimal: 0x00080000…0x6FFFFFFF. This
    range is above the 16bit boundary. Moreover it's below the 31bit boundary,
    as some broken code (specifically: the kernel's `devpts` file system)
    erroneously considers UIDs signed integers, and hence can't deal with values
    above 2^31. The `systemd-machined.service` service will synthesize user
    database records for all UIDs assigned to a running container from this
    range.

 Note for both allocation ranges: when an UID allocation takes place NSS is
 checked for collisions first, and a different UID is picked if an entry is
 found. Thus, the user database is used as synchronization mechanism to ensure
 exclusive ownership of UIDs and UID ranges. To ensure compatibility with other
 subsystems allocating from the same ranges it is hence essential that they
 ensure that whatever they pick shows up in the user/group databases, either by
 providing an NSS module, or by adding entries directly to `/etc/passwd` and
 `/etc/group`. For performance reasons, do note that `systemd-nspawn` will only
 do an NSS check for the first UID of the range it allocates, not all 65536 of
 them. Also note that while the allocation logic is operating, the glibc
 `lckpwdf()` user database lock is taken, in order to make this logic race-free.

 ## Figuring out the system's UID boundaries

 The most important boundaries of the local system may be queried with
 `pkg-config`:

 ```
 $ pkg-config --variable=systemuidmax systemd
 999
 $ pkg-config --variable=dynamicuidmin systemd
 61184
 $ pkg-config --variable=dynamicuidmax systemd
 65519
 $ pkg-config --variable=containeruidbasemin systemd
 524288
 $ pkg-config --variable=containeruidbasemax systemd
 1878982656
 ```

 (Note that the latter encodes the maximum UID *base* `systemd-nspawn` might
 pick — given that 64K UIDs are assigned to each container according to this
 allocation logic, the maximum UID used for this range is hence
 1878982656+65535=1879048191.)

 Note that systemd does not make any of these values runtime-configurable. All
 these boundaries are chosen during build time. That said, the system UID/GID
 boundary is traditionally configured in /etc/login.defs, though systemd won't
 look there during runtime.

 ## Considerations for container managers

 If you hack on a container manager, and wonder how and how many UIDs best to
 assign to your containers, here are a few recommendations:

 1. Definitely, don't assign less than 65536 UIDs/GIDs. After all the `nobody`
 user has magic properties, and hence should be available in your container, and
 given that it's assigned the UID 65534, you should really cover the full 16bit
 range in your container. Note that systemd will — as mentioned — synthesize
 user records for the `nobody` user, and assumes its availability in various
 other parts of its codebase, too, hence assigning fewer users means you lose
 compatibility with running systemd code inside your container. And most likely
 other packages make similar restrictions.

 2. While it's fine to assign more than 65536 UIDs/GIDs to a container, there's
 most likely not much value in doing so, as Linux distributions won't use the
 higher ranges by default (as mentioned neither `adduser` nor `systemd`'s
 dynamic user concept allocate from above the 16bit range). Unless you actively
 care for nested containers, it's hence probably a good idea to allocate exactly
 65536 UIDs per container, and neither less nor more. A pretty side-effect is
 that by doing so, you expose the same number of UIDs per container as Linux 2.2
 supported for the whole system, back in the days.

 3. Consider allocating UID ranges for containers so that the first UID you
 assign has the lower 16bits all set to zero. That way, the upper 16bits become
 a container ID of some kind, while the lower 16bits directly encode the
 internal container UID. This is the way `systemd-nspawn` allocates UID ranges
 (see above). Following this allocation logic ensures best compatibility with
 `systemd-nspawn` and all other container managers following the scheme, as it
 is sufficient then to check NSS for the first UID you pick regarding conflicts,
 as that's what they do, too. Moreover, it makes `chown()`ing container file
 system trees nicely robust to interruptions: as the external UID encodes the
 internal UID in a fixed way, it's very easy to adjust the container's base UID
 without the need to know the original base UID: to change the container base,
 just mask away the upper 16bit, and insert the upper 16bit of the new container
 base instead. Here are the easy conversions to derive the internal UID, the
 external UID, and the container base UID from each other:

     ```
     INTERNAL_UID = EXTERNAL_UID & 0x0000FFFF
     CONTAINER_BASE_UID = EXTERNAL_UID & 0xFFFF0000
     EXTERNAL_UID = INTERNAL_UID | CONTAINER_BASE_UID
     ```

 4. When picking a UID range for containers, make sure to check NSS first, with
 a simple `getpwuid()` call: if there's already a user record for the first UID
 you want to pick, then it's already in use: pick a different one. Wrap that
 call in a `lckpwdf()` + `ulckpwdf()` pair, to make allocation
 race-free. Provide an NSS module that makes all UIDs you end up taking show up
 in the user database, and make sure that the NSS module returns up-to-date
 information before you release the lock, so that other system components can
 safely use the NSS user database as allocation check, too. Note that if you
 follow this scheme no changes to `/etc/passwd` need to be made, thus minimizing
 the artifacts the container manager persistently leaves in the system.

 ## Summary

 |               UID/GID | Purpose               | Defined By    | Listed in                     |
 |-----------------------|-----------------------|---------------|-------------------------------|
 |                     0 | `root` user           | Linux         | `/etc/passwd` + `nss-systemd` |
 |                   1…4 | System users          | Distributions | `/etc/passwd`                 |
 |                     5 | `tty` group           | `systemd`     | `/etc/passwd`                 |
 |                 6…999 | System users          | Distributions | `/etc/passwd`                 |
 |            1000…60000 | Regular users         | Distributions | `/etc/passwd` + LDAP/NIS/…    |
 |           60001…60513 | Human Users (homed)   | `systemd`     | `nss-systemd`                 |
 |           60514…61183 | Unused                |               |                               |
 |           61184…65519 | Dynamic service users | `systemd`     | `nss-systemd`                 |
 |           65520…65533 | Unused                |               |                               |
 |                 65534 | `nobody` user         | Linux         | `/etc/passwd` + `nss-systemd` |
 |                 65535 | 16bit `(uid_t) -1`    | Linux         |                               |
 |          65536…524287 | Unused                |               |                               |
 |     524288…1879048191 | Container UID ranges  | `systemd`     | `nss-systemd`                 |
 | 1879048192…2147483647 | Unused                |               |                               |
 | 2147483648…4294967294 | HIC SVNT LEONES       |               |                               |
 |            4294967295 | 32bit `(uid_t) -1`    | Linux         |                               |

 Note that "Unused" in the table above doesn't meant that these ranges are
 really unused. It just means that these ranges have no well-established
 pre-defined purposes between Linux, generic low-level distributions and
 `systemd`. There might very well be other packages that allocate from these
 ranges.

 Note that the range 2147483648…4294967294 (i.e. 2^31…2^32-2) should be handled
 with care. Various programs (including kernel file systems, see `devpts`) have
 trouble with UIDs outside of the signed 32bit range, i.e any UIDs equal to or
 above 2147483648. It is thus strongly recommended to stay away from this range
 in order to avoid complications. This range should be considered reserved for
 future, special purposes.

 ## Notes on resolvability of user and group names

 User names, UIDs, group names and GIDs don't have to be resolvable using NSS
 (i.e. getpwuid() and getpwnam() and friends) all the time. However, systemd
 makes the following requirements:

 System users generally have to be resolvable during early boot already. This
 means they should not be provided by any networked service (as those usually
 become available during late boot only), except if a local cache is kept that
 makes them available during early boot too (i.e. before networking is
 up). Specifically, system users need to be resolvable at least before
 `systemd-udevd.service` and `systemd-tmpfiles.service` are started, as both
 need to resolve system users — but note that there might be more services
 requiring full resolvability of system users than just these two.

 Regular users do not need to be resolvable during early boot, it is sufficient
 if they become resolvable during late boot. Specifically, regular users need to
 be resolvable at the point in time the `nss-user-lookup.target` unit is
 reached. This target unit is generally used as synchronization point between
 providers of the user database and consumers of it. Services that require that
 the user database is fully available (for example, the login service
 `systemd-logind.service`) are ordered *after* it, while services that provide
 parts of the user database (for example an LDAP user database client) are
 ordered *before* it. Note that `nss-user-lookup.target` is a *passive* unit: in
 order to minimize synchronization points on systems that don't need it the unit
 is pulled into the initial transaction only if there's at least one service
 that really needs it, and that means only if there's a service providing the
 local user database somehow through IPC or suchlike. Or in other words: if you
 hack on some networked user database project, then make sure you order your
 service `Before=nss-user-lookup.target` and that you pull it in with
 `Wants=nss-user-lookup.target`. However, if you hack on some project that needs
 the user database to be up in full, then order your service
 `After=nss-user-lookup.target`, but do *not* pull it in via a `Wants=`
 dependency.
	---
	title: Users, Groups, UIDs and GIDs on systemd Systems
	category: Users, Groups and Home Directories
	layout: default
	---

	# Users, Groups, UIDs and GIDs on systemd Systems

	Here's a summary of the requirements `systemd` (and Linux) make on UID/GID
	assignments and their ranges.

	Note that while in theory UIDs and GIDs are orthogonal concepts they really
	aren't IRL. With that in mind, when we discuss UIDs below it should be assumed
	that whatever we say about UIDs applies to GIDs in mostly the same way, and all
	the special assignments and ranges for UIDs always have mostly the same
	validity for GIDs too.

	## Special Linux UIDs

	In theory, the range of the C type `uid_t` is 32bit wide on Linux,
	i.e. 0…4294967295. However, four UIDs are special on Linux:

	1. 0 → The `root` super-user

	2. 65534 → The `nobody` UID, also called the "overflow" UID or similar. It's
	where various subsystems map unmappable users to, for example file systems
	only supporting 16bit UIDs, NFS or user namespacing. (The latter can be
	changed with a sysctl during runtime, but that's not supported on
	`systemd`. If you do change it you void your warranty.) Because Fedora is a
	bit confused the `nobody` user is called `nfsnobody` there (and they have a
	different `nobody` user at UID 99). I hope this will be corrected eventually
	though. (Also, some distributions call the `nobody` group `nogroup`. I wish
	they didn't.)

	3. 4294967295, aka "32bit `(uid_t) -1`" → This UID is not a valid user ID, as
	`setresuid()`, `chown()` and friends treat -1 as a special request to not
	change the UID of the process/file. This UID is hence not available for
	assignment to users in the user database.

	4. 65535, aka "16bit `(uid_t) -1`" → Before Linux kernel 2.4 `uid_t` used to be
	16bit, and programs compiled for that would hence assume that `(uid_t) -1`
	is 65535. This UID is hence not usable either.

	The `nss-systemd` glibc NSS module will synthesize user database records for
	the UIDs 0 and 65534 if the system user database doesn't list them. This means
	that any system where this module is enabled works to some minimal level
	without `/etc/passwd`.

	## Special Distribution UID ranges

	Distributions generally split the available UID range in two:

	1. 1…999 → System users. These are users that do not map to actual "human"
	users, but are used as security identities for system daemons, to implement
	privilege separation and run system daemons with minimal privileges.

	2. 1000…65533 and 65536…4294967294 → Everything else, i.e. regular (human) users.

	Note that most distributions allow changing the boundary between system and
	regular users, even during runtime as user configuration. Moreover, some older
	systems placed the boundary at 499/500, or even 99/100. In `systemd`, the
	boundary is configurable only during compilation time, as this should be a
	decision for distribution builders, not for users. Moreover, we strongly
	discourage downstreams to change the boundary from the upstream default of
	999/1000.

	Also note that programs such as `adduser` tend to allocate from a subset of the
	available regular user range only, usually 1000..60000. And it's also usually
	user-configurable, too.

	Note that systemd requires that system users and groups are resolvable without
	networking available — a requirement that is not made for regular users. This
	means regular users may be stored in remote LDAP or NIS databases, but system
	users may not (except when there's a consistent local cache kept, that is
	available during earliest boot, including in the initial RAM disk).

	## Special `systemd` GIDs

	`systemd` defines no special UIDs beyond what Linux already defines (see
	above). However, it does define some special group/GID assignments, which are
	primarily used for `systemd-udevd`'s device management. The precise list of the
	currently defined groups is found in this `sysusers.d` snippet:
	[basic.conf](https://raw.githubusercontent.com/systemd/systemd/master/sysusers.d/basic.conf.in)

	It's strongly recommended that downstream distributions include these groups in
	their default group databases.

	Note that the actual GID numbers assigned to these groups do not have to be
	constant beyond a specific system. There's one exception however: the `tty`
	group must have the GID 5. That's because it must be encoded in the `devpts`
	mount parameters during earliest boot, at a time where NSS lookups are not
	possible. (Note that the actual GID can be changed during `systemd` build time,
	but downstreams are strongly advised against doing that.)

	## Special `systemd` UID ranges

	`systemd` defines a number of special UID ranges:

	1. 60001…60513 → UIDs for home directories managed by
	[`systemd-homed.service(8)`](https://www.freedesktop.org/software/systemd/man/systemd-homed.service.html). UIDs
	from this range are automatically assigned to any home directory discovered,
	and persisted locally on first login. On different systems the same user
	might get different UIDs assigned in case of conflict, though it is
	attempted to make UID assignments stable, by deriving them from a hash of
	the user name.

	2. 61184…65519 → UIDs for dynamic users are allocated from this range (see the
	`DynamicUser=` documentation in
	[`systemd.exec(5)`](https://www.freedesktop.org/software/systemd/man/systemd.exec.html)). This
	range has been chosen so that it is below the 16bit boundary (i.e. below
	65535), in order to provide compatibility with container environments that
	assign a 64K range of UIDs to containers using user namespacing. This range
	is above the 60000 boundary, so that its allocations are unlikely to be
	affected by `adduser` allocations (see above). And we leave some room
	upwards for other purposes. (And if you wonder why precisely these numbers:
	if you write them in hexadecimal, they might make more sense: 0xEF00 and
	0xFFEF). The `nss-systemd` module will synthesize user records implicitly
	for all currently allocated dynamic users from this range. Thus, NSS-based
	user record resolving works correctly without those users being in
	`/etc/passwd`.

	3. 524288…1879048191 → UID range for `systemd-nspawn`'s automatic allocation of
	per-container UID ranges. When the `--private-users=pick` switch is used (or
	`-U`) then it will automatically find a so far unused 16bit subrange of this
	range and assign it to the container. The range is picked so that the upper
	16bit of the 32bit UIDs are constant for all users of the container, while
	the lower 16bit directly encode the 65536 UIDs assigned to the
	container. This mode of allocation means that the upper 16bit of any UID
	assigned to a container are kind of a "container ID", while the lower 16bit
	directly expose the container's own UID numbers. If you wonder why precisely
	these numbers, consider them in hexadecimal: 0x00080000…0x6FFFFFFF. This
	range is above the 16bit boundary. Moreover it's below the 31bit boundary,
	as some broken code (specifically: the kernel's `devpts` file system)
	erroneously considers UIDs signed integers, and hence can't deal with values
	above 2^31. The `systemd-machined.service` service will synthesize user
	database records for all UIDs assigned to a running container from this
	range.

	Note for both allocation ranges: when an UID allocation takes place NSS is
	checked for collisions first, and a different UID is picked if an entry is
	found. Thus, the user database is used as synchronization mechanism to ensure
	exclusive ownership of UIDs and UID ranges. To ensure compatibility with other
	subsystems allocating from the same ranges it is hence essential that they
	ensure that whatever they pick shows up in the user/group databases, either by
	providing an NSS module, or by adding entries directly to `/etc/passwd` and
	`/etc/group`. For performance reasons, do note that `systemd-nspawn` will only
	do an NSS check for the first UID of the range it allocates, not all 65536 of
	them. Also note that while the allocation logic is operating, the glibc
	`lckpwdf()` user database lock is taken, in order to make this logic race-free.

	## Figuring out the system's UID boundaries

	The most important boundaries of the local system may be queried with
	`pkg-config`:

	```
	$ pkg-config --variable=systemuidmax systemd
	999
	$ pkg-config --variable=dynamicuidmin systemd
	61184
	$ pkg-config --variable=dynamicuidmax systemd
	65519
	$ pkg-config --variable=containeruidbasemin systemd
	524288
	$ pkg-config --variable=containeruidbasemax systemd
	1878982656
	```

	(Note that the latter encodes the maximum UID base `systemd-nspawn` might
	pick — given that 64K UIDs are assigned to each container according to this
	allocation logic, the maximum UID used for this range is hence
	1878982656+65535=1879048191.)

	Note that systemd does not make any of these values runtime-configurable. All
	these boundaries are chosen during build time. That said, the system UID/GID
	boundary is traditionally configured in /etc/login.defs, though systemd won't
	look there during runtime.

	## Considerations for container managers

	If you hack on a container manager, and wonder how and how many UIDs best to
	assign to your containers, here are a few recommendations:

	1. Definitely, don't assign less than 65536 UIDs/GIDs. After all the `nobody`
	user has magic properties, and hence should be available in your container, and
	given that it's assigned the UID 65534, you should really cover the full 16bit
	range in your container. Note that systemd will — as mentioned — synthesize
	user records for the `nobody` user, and assumes its availability in various
	other parts of its codebase, too, hence assigning fewer users means you lose
	compatibility with running systemd code inside your container. And most likely
	other packages make similar restrictions.

	2. While it's fine to assign more than 65536 UIDs/GIDs to a container, there's
	most likely not much value in doing so, as Linux distributions won't use the
	higher ranges by default (as mentioned neither `adduser` nor `systemd`'s
	dynamic user concept allocate from above the 16bit range). Unless you actively
	care for nested containers, it's hence probably a good idea to allocate exactly
	65536 UIDs per container, and neither less nor more. A pretty side-effect is
	that by doing so, you expose the same number of UIDs per container as Linux 2.2
	supported for the whole system, back in the days.

	3. Consider allocating UID ranges for containers so that the first UID you
	assign has the lower 16bits all set to zero. That way, the upper 16bits become
	a container ID of some kind, while the lower 16bits directly encode the
	internal container UID. This is the way `systemd-nspawn` allocates UID ranges
	(see above). Following this allocation logic ensures best compatibility with
	`systemd-nspawn` and all other container managers following the scheme, as it
	is sufficient then to check NSS for the first UID you pick regarding conflicts,
	as that's what they do, too. Moreover, it makes `chown()`ing container file
	system trees nicely robust to interruptions: as the external UID encodes the
	internal UID in a fixed way, it's very easy to adjust the container's base UID
	without the need to know the original base UID: to change the container base,
	just mask away the upper 16bit, and insert the upper 16bit of the new container
	base instead. Here are the easy conversions to derive the internal UID, the
	external UID, and the container base UID from each other:

	```
	INTERNAL_UID = EXTERNAL_UID & 0x0000FFFF
	CONTAINER_BASE_UID = EXTERNAL_UID & 0xFFFF0000
	EXTERNAL_UID = INTERNAL_UID \| CONTAINER_BASE_UID
	```

	4. When picking a UID range for containers, make sure to check NSS first, with
	a simple `getpwuid()` call: if there's already a user record for the first UID
	you want to pick, then it's already in use: pick a different one. Wrap that
	call in a `lckpwdf()` + `ulckpwdf()` pair, to make allocation
	race-free. Provide an NSS module that makes all UIDs you end up taking show up
	in the user database, and make sure that the NSS module returns up-to-date
	information before you release the lock, so that other system components can
	safely use the NSS user database as allocation check, too. Note that if you
	follow this scheme no changes to `/etc/passwd` need to be made, thus minimizing
	the artifacts the container manager persistently leaves in the system.

	## Summary

	\| UID/GID \| Purpose \| Defined By \| Listed in \|
	\|-----------------------\|-----------------------\|---------------\|-------------------------------\|
	\| 0 \| `root` user \| Linux \| `/etc/passwd` + `nss-systemd` \|
	\| 1…4 \| System users \| Distributions \| `/etc/passwd` \|
	\| 5 \| `tty` group \| `systemd` \| `/etc/passwd` \|
	\| 6…999 \| System users \| Distributions \| `/etc/passwd` \|
	\| 1000…60000 \| Regular users \| Distributions \| `/etc/passwd` + LDAP/NIS/… \|
	\| 60001…60513 \| Human Users (homed) \| `systemd` \| `nss-systemd` \|
	\| 60514…61183 \| Unused \| \| \|
	\| 61184…65519 \| Dynamic service users \| `systemd` \| `nss-systemd` \|
	\| 65520…65533 \| Unused \| \| \|
	\| 65534 \| `nobody` user \| Linux \| `/etc/passwd` + `nss-systemd` \|
	\| 65535 \| 16bit `(uid_t) -1` \| Linux \| \|
	\| 65536…524287 \| Unused \| \| \|
	\| 524288…1879048191 \| Container UID ranges \| `systemd` \| `nss-systemd` \|
	\| 1879048192…2147483647 \| Unused \| \| \|
	\| 2147483648…4294967294 \| HIC SVNT LEONES \| \| \|
	\| 4294967295 \| 32bit `(uid_t) -1` \| Linux \| \|

	Note that "Unused" in the table above doesn't meant that these ranges are
	really unused. It just means that these ranges have no well-established
	pre-defined purposes between Linux, generic low-level distributions and
	`systemd`. There might very well be other packages that allocate from these
	ranges.

	Note that the range 2147483648…4294967294 (i.e. 2^31…2^32-2) should be handled
	with care. Various programs (including kernel file systems, see `devpts`) have
	trouble with UIDs outside of the signed 32bit range, i.e any UIDs equal to or
	above 2147483648. It is thus strongly recommended to stay away from this range
	in order to avoid complications. This range should be considered reserved for
	future, special purposes.

	## Notes on resolvability of user and group names

	User names, UIDs, group names and GIDs don't have to be resolvable using NSS
	(i.e. getpwuid() and getpwnam() and friends) all the time. However, systemd
	makes the following requirements:

	System users generally have to be resolvable during early boot already. This
	means they should not be provided by any networked service (as those usually
	become available during late boot only), except if a local cache is kept that
	makes them available during early boot too (i.e. before networking is
	up). Specifically, system users need to be resolvable at least before
	`systemd-udevd.service` and `systemd-tmpfiles.service` are started, as both
	need to resolve system users — but note that there might be more services
	requiring full resolvability of system users than just these two.

	Regular users do not need to be resolvable during early boot, it is sufficient
	if they become resolvable during late boot. Specifically, regular users need to
	be resolvable at the point in time the `nss-user-lookup.target` unit is
	reached. This target unit is generally used as synchronization point between
	providers of the user database and consumers of it. Services that require that
	the user database is fully available (for example, the login service
	`systemd-logind.service`) are ordered after it, while services that provide
	parts of the user database (for example an LDAP user database client) are
	ordered before it. Note that `nss-user-lookup.target` is a passive unit: in
	order to minimize synchronization points on systems that don't need it the unit
	is pulled into the initial transaction only if there's at least one service
	that really needs it, and that means only if there's a service providing the
	local user database somehow through IPC or suchlike. Or in other words: if you
	hack on some networked user database project, then make sure you order your
	service `Before=nss-user-lookup.target` and that you pull it in with
	`Wants=nss-user-lookup.target`. However, if you hack on some project that needs
	the user database to be up in full, then order your service
	`After=nss-user-lookup.target`, but do not pull it in via a `Wants=`
	dependency.