systemd can interface with the boot loader to receive performance data and other information, and pass control information. This is only supported on EFI systems. Data is transferred between the boot loader and systemd in EFI variables. All EFI variables use the vendor UUID 4a67b082-0a4c-41cf-b6c7-440b29bb8c4f.
The EFI Variable LoaderTimeInitUSec contains the timestamp in microseconds when the loader was initialized. This value is the time spent in the firmware for initialization, it is formatted as numeric, NUL-terminated, decimal string, in UTF-16.
The EFI Variable LoaderTimeExecUSec contains the timestamp in microseconds when the loader finished its work and is about to execute the kernel. The time spent in the loader is the difference between LoaderTimeExecUSec and LoaderTimeInitUSec. This value is formatted the same way as LoaderTimeInitUSec.
The EFI variable LoaderDevicePartUUID contains the partition GUID of the ESP the boot loader was run from formatted as NUL-terminated UTF16 string, in normal GUID syntax.
The EFI variable LoaderConfigTimeout contains the boot menu timeout currently in use. It may be modified both by the boot loader and by the host. The value should be formatted as numeric, NUL-terminated, decimal string, in UTF-16. The time is specified in µs.
Similarly, the EFI variable LoaderConfigTimeoutOneShot contains a boot menu timeout for a single following boot. It is set by the OS in order to request display of the boot menu on the following boot. When set overrides LoaderConfigTimeout. It is removed automatically after being read by the boot loader, to ensure it only takes effect a single time. This value is formatted the same way as LoaderConfigTimeout. If set to 0 the boot menu timeout is turned off, and the menu is shown indefinitely.
The EFI variable LoaderEntries may contain a series of boot loader entry identifiers, one after the other, each individually NUL terminated. This may be used to let the OS know which boot menu entries were discovered by the boot loader. A boot loader entry identifier should be a short, non-empty alphanumeric string (possibly containing -, too). The list should be in the order the entries are shown on screen during boot. See below regarding a recommended vocabulary for boot loader entry identifiers.
The EFI variable LoaderEntryDefault contains the default boot loader entry to use. It contains a NUL-terminated boot loader entry identifier.
Similarly, the EFI variable LoaderEntryOneShot contains the default boot loader entry to use for a single following boot. It is set by the OS in order to request booting into a specific menu entry on the following boot. When set overrides LoaderEntryDefault. It is removed automatically after being read by the boot loader, to ensure it only takes effect a single time. This value is formatted the same way as LoaderEntryDefault.
The EFI variable LoaderEntrySelected contains the boot loader entry identifier that was booted. It is set by the boot loader and read by the OS in order to identify which entry has been used for the current boot.
The EFI variable LoaderFeatures contains a 64bit unsigned integer with a number of flags bits that are set by the boot loader and passed to the OS and indicate the features the boot loader supports. Specifically, the following bits are defined:
1 << 0 → The boot loader honours LoaderConfigTimeout when set.1 << 1 → The boot loader honours LoaderConfigTimeoutOneShot when set.1 << 2 → The boot loader honours LoaderEntryDefault when set.1 << 3 → The boot loader honours LoaderEntryOneShot when set.1 << 4 → The boot loader supports boot counting as described in Automatic Boot Assessment.1 << 5 → The boot loader supports looking for boot menu entries in the Extended Boot Loader Partition.1 << 6 → The boot loader spports passing a random seed to the OS.The EFI variable LoaderRandomSeed contains a binary random seed if set. It is set by the boot loader to pass an entropy seed read from the ESP partition to the OS. The system manager then credits this seed to the kernel's entropy pool. It is the responsibility of the boot loader to ensure the quality and integrity of the random seed.
The EFI variable LoaderSystemToken contains binary random data, persistently set by the OS installer. Boot loaders that support passing random seeds to the OS should use this data and combine it with the random seed file read from the ESP. By combining this random data with the random seed read off the disk before generating a seed to pass to the OS and a new seed to store in the ESP the boot loader can protect itself from situations where “golden” OS images that include a random seed are replicated and used on multiple systems. Since the EFI variable storage is usually independent (i.e. in physical NVRAM) of the ESP file system storage, and only the latter is part of “golden” OS images, this ensures that different systems still come up with different random seeds. Note that the LoaderSystemToken is generally only written once, by the OS installer, and is usually not touched after that.
If LoaderTimeInitUSec and LoaderTimeExecUSec are set, systemd-analyze will include them in its boot-time analysis. If LoaderDevicePartUUID is set, systemd will mount the ESP that was used for the boot to /boot, but only if that directory is empty, and only if no other file systems are mounted there. The systemctl reboot --boot-loader-entry=… and systemctl reboot --boot-loader-menu=… commands rely on the LoaderFeatures , LoaderConfigTimeoutOneShot, LoaderEntries, LoaderEntryOneShot variables. LoaderRandomSeed is read by PID during early boot and credited to the kernel's random pool.
While boot loader entries may be named relatively freely, it's highly recommended to follow the following rules when picking identifiers for the entries, so that programs (and users) can derive basic context and meaning from the identifiers as passed in LoaderEntries, LoaderEntryDefault, LoaderEntryOneShot, LoaderEntrySelected, and possibly show nicely localized names for them in UIs.
When boot loader entries are defined through Boot Loader Specification drop-in files the identifier should be derived directly from the drop-in snippet name, but with the .conf (or .efi in case of Type #2 entries) suffix removed.
Entries automatically discovered by the boot loader (as opposed to being configured in configuration files) should generally have an identifier prefixed with auto-.
Boot menu entries referring to Microsoft Windows installations should either use the identifier windows or use the windows- prefix for the identifier. If a menu entry is automatically discovered, it should be prefixed with auto-, see above (Example: this means an automatically discovered Windows installation might have the identifier auto-windows or auto-windows-10 or so.).
Similar, boot menu entries referring to Apple MacOS X installations should use the identifier osx or one that is prefixed with osx-. If such an entry is automatically discovered by the boot loader use auto-osx as identifier, or auto-osx- as prefix for the identifier, see above.
If a boot menu entry encapsulates the EFI shell program, it should use the identifier efi-shell (or when automatically discovered: auto-efi-shell, see above).
If a boot menu entry encapsulates a reboot into EFI firmware setup feature, it should use the identifier reboot-to-firmware-setup (or auto-reboot-to-firmware-setup in case it is automatically discovered).