ssh-agent.1 - security/openssh-library - Rivoreo Source Code Repositories

 .\" $OpenBSD: ssh-agent.1,v 1.45 2007/05/31 19:20:16 jmc Exp $
 .\"
 .\" Author: Tatu Ylonen <ylo@cs.hut.fi>
 .\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
 .\"                    All rights reserved
 .\"
 .\" As far as I am concerned, the code I have written for this software
 .\" can be used freely for any purpose.  Any derived versions of this
 .\" software must be clearly marked as such, and if the derived work is
 .\" incompatible with the protocol description in the RFC file, it must be
 .\" called by a name other than "ssh" or "Secure Shell".
 .\"
 .\" Copyright (c) 1999,2000 Markus Friedl.  All rights reserved.
 .\" Copyright (c) 1999 Aaron Campbell.  All rights reserved.
 .\" Copyright (c) 1999 Theo de Raadt.  All rights reserved.
 .\"
 .\" Redistribution and use in source and binary forms, with or without
 .\" modification, are permitted provided that the following conditions
 .\" are met:
 .\" 1. Redistributions of source code must retain the above copyright
 .\"    notice, this list of conditions and the following disclaimer.
 .\" 2. Redistributions in binary form must reproduce the above copyright
 .\"    notice, this list of conditions and the following disclaimer in the
 .\"    documentation and/or other materials provided with the distribution.
 .\"
 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
 .Dd $Mdocdate: May 31 2007 $
 .Dt SSH-AGENT 1
 .Os
 .Sh NAME
 .Nm ssh-agent
 .Nd authentication agent
 .Sh SYNOPSIS
 .Nm ssh-agent
 .Op Fl a Ar bind_address
 .Op Fl c Li | Fl s
 .Op Fl t Ar life
 .Op Fl d
 .Op Ar command Op Ar args ...
 .Nm ssh-agent
 .Op Fl c Li | Fl s
 .Fl k
 .Sh DESCRIPTION
 .Nm
 is a program to hold private keys used for public key authentication
 (RSA, DSA).
 The idea is that
 .Nm
 is started in the beginning of an X-session or a login session, and
 all other windows or programs are started as clients to the ssh-agent
 program.
 Through use of environment variables the agent can be located
 and automatically used for authentication when logging in to other
 machines using
 .Xr ssh 1 .
 .Pp
 The options are as follows:
 .Bl -tag -width Ds
 .It Fl a Ar bind_address
 Bind the agent to the unix-domain socket
 .Ar bind_address .
 The default is
 .Pa /tmp/ssh-XXXXXXXXXX/agent.\*(Ltppid\*(Gt .
 .It Fl c
 Generate C-shell commands on
 .Dv stdout .
 This is the default if
 .Ev SHELL
 looks like it's a csh style of shell.
 .It Fl s
 Generate Bourne shell commands on
 .Dv stdout .
 This is the default if
 .Ev SHELL
 does not look like it's a csh style of shell.
 .It Fl k
 Kill the current agent (given by the
 .Ev SSH_AGENT_PID
 environment variable).
 .It Fl t Ar life
 Set a default value for the maximum lifetime of identities added to the agent.
 The lifetime may be specified in seconds or in a time format specified in
 .Xr sshd_config 5 .
 A lifetime specified for an identity with
 .Xr ssh-add 1
 overrides this value.
 Without this option the default maximum lifetime is forever.
 .It Fl d
 Debug mode.
 When this option is specified
 .Nm
 will not fork.
 .El
 .Pp
 If a commandline is given, this is executed as a subprocess of the agent.
 When the command dies, so does the agent.
 .Pp
 The agent initially does not have any private keys.
 Keys are added using
 .Xr ssh-add 1 .
 When executed without arguments,
 .Xr ssh-add 1
 adds the files
 .Pa ~/.ssh/id_rsa ,
 .Pa ~/.ssh/id_dsa
 and
 .Pa ~/.ssh/identity .
 If the identity has a passphrase,
 .Xr ssh-add 1
 asks for the passphrase (using a small X11 application if running
 under X11, or from the terminal if running without X).
 It then sends the identity to the agent.
 Several identities can be stored in the
 agent; the agent can automatically use any of these identities.
 .Ic ssh-add -l
 displays the identities currently held by the agent.
 .Pp
 The idea is that the agent is run in the user's local PC, laptop, or
 terminal.
 Authentication data need not be stored on any other
 machine, and authentication passphrases never go over the network.
 However, the connection to the agent is forwarded over SSH
 remote logins, and the user can thus use the privileges given by the
 identities anywhere in the network in a secure way.
 .Pp
 There are two main ways to get an agent set up:
 The first is that the agent starts a new subcommand into which some environment
 variables are exported, eg
 .Cm ssh-agent xterm & .
 The second is that the agent prints the needed shell commands (either
 .Xr sh 1
 or
 .Xr csh 1
 syntax can be generated) which can be evalled in the calling shell, eg
 .Cm eval `ssh-agent -s`
 for Bourne-type shells such as
 .Xr sh 1
 or
 .Xr ksh 1
 and
 .Cm eval `ssh-agent -c`
 for
 .Xr csh 1
 and derivatives.
 .Pp
 Later
 .Xr ssh 1
 looks at these variables and uses them to establish a connection to the agent.
 .Pp
 The agent will never send a private key over its request channel.
 Instead, operations that require a private key will be performed
 by the agent, and the result will be returned to the requester.
 This way, private keys are not exposed to clients using the agent.
 .Pp
 A unix-domain socket is created
 and the name of this socket is stored in the
 .Ev SSH_AUTH_SOCK
 environment
 variable.
 The socket is made accessible only to the current user.
 This method is easily abused by root or another instance of the same
 user.
 .Pp
 The
 .Ev SSH_AGENT_PID
 environment variable holds the agent's process ID.
 .Pp
 The agent exits automatically when the command given on the command
 line terminates.
 .Sh FILES
 .Bl -tag -width Ds
 .It Pa ~/.ssh/identity
 Contains the protocol version 1 RSA authentication identity of the user.
 .It Pa ~/.ssh/id_dsa
 Contains the protocol version 2 DSA authentication identity of the user.
 .It Pa ~/.ssh/id_rsa
 Contains the protocol version 2 RSA authentication identity of the user.
 .It Pa /tmp/ssh-XXXXXXXXXX/agent.\*(Ltppid\*(Gt
 Unix-domain sockets used to contain the connection to the
 authentication agent.
 These sockets should only be readable by the owner.
 The sockets should get automatically removed when the agent exits.
 .El
 .Sh SEE ALSO
 .Xr ssh 1 ,
 .Xr ssh-add 1 ,
 .Xr ssh-keygen 1 ,
 .Xr sshd 8
 .Sh AUTHORS
 OpenSSH is a derivative of the original and free
 ssh 1.2.12 release by Tatu Ylonen.
 Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
 Theo de Raadt and Dug Song
 removed many bugs, re-added newer features and
 created OpenSSH.
 Markus Friedl contributed the support for SSH
 protocol versions 1.5 and 2.0.
	.\" $OpenBSD: ssh-agent.1,v 1.45 2007/05/31 19:20:16 jmc Exp $
	.\"
	.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
	.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
	.\" All rights reserved
	.\"
	.\" As far as I am concerned, the code I have written for this software
	.\" can be used freely for any purpose. Any derived versions of this
	.\" software must be clearly marked as such, and if the derived work is
	.\" incompatible with the protocol description in the RFC file, it must be
	.\" called by a name other than "ssh" or "Secure Shell".
	.\"
	.\" Copyright (c) 1999,2000 Markus Friedl. All rights reserved.
	.\" Copyright (c) 1999 Aaron Campbell. All rights reserved.
	.\" Copyright (c) 1999 Theo de Raadt. All rights reserved.
	.\"
	.\" Redistribution and use in source and binary forms, with or without
	.\" modification, are permitted provided that the following conditions
	.\" are met:
	.\" 1. Redistributions of source code must retain the above copyright
	.\" notice, this list of conditions and the following disclaimer.
	.\" 2. Redistributions in binary form must reproduce the above copyright
	.\" notice, this list of conditions and the following disclaimer in the
	.\" documentation and/or other materials provided with the distribution.
	.\"
	.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
	.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
	.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
	.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	.\"
	.Dd $Mdocdate: May 31 2007 $
	.Dt SSH-AGENT 1
	.Os
	.Sh NAME
	.Nm ssh-agent
	.Nd authentication agent
	.Sh SYNOPSIS
	.Nm ssh-agent
	.Op Fl a Ar bind_address
	.Op Fl c Li \| Fl s
	.Op Fl t Ar life
	.Op Fl d
	.Op Ar command Op Ar args ...
	.Nm ssh-agent
	.Op Fl c Li \| Fl s
	.Fl k
	.Sh DESCRIPTION
	.Nm
	is a program to hold private keys used for public key authentication
	(RSA, DSA).
	The idea is that
	.Nm
	is started in the beginning of an X-session or a login session, and
	all other windows or programs are started as clients to the ssh-agent
	program.
	Through use of environment variables the agent can be located
	and automatically used for authentication when logging in to other
	machines using
	.Xr ssh 1 .
	.Pp
	The options are as follows:
	.Bl -tag -width Ds
	.It Fl a Ar bind_address
	Bind the agent to the unix-domain socket
	.Ar bind_address .
	The default is
	.Pa /tmp/ssh-XXXXXXXXXX/agent.\(Ltppid\(Gt .
	.It Fl c
	Generate C-shell commands on
	.Dv stdout .
	This is the default if
	.Ev SHELL
	looks like it's a csh style of shell.
	.It Fl s
	Generate Bourne shell commands on
	.Dv stdout .
	This is the default if
	.Ev SHELL
	does not look like it's a csh style of shell.
	.It Fl k
	Kill the current agent (given by the
	.Ev SSH_AGENT_PID
	environment variable).
	.It Fl t Ar life
	Set a default value for the maximum lifetime of identities added to the agent.
	The lifetime may be specified in seconds or in a time format specified in
	.Xr sshd_config 5 .
	A lifetime specified for an identity with
	.Xr ssh-add 1
	overrides this value.
	Without this option the default maximum lifetime is forever.
	.It Fl d
	Debug mode.
	When this option is specified
	.Nm
	will not fork.
	.El
	.Pp
	If a commandline is given, this is executed as a subprocess of the agent.
	When the command dies, so does the agent.
	.Pp
	The agent initially does not have any private keys.
	Keys are added using
	.Xr ssh-add 1 .
	When executed without arguments,
	.Xr ssh-add 1
	adds the files
	.Pa ~/.ssh/id_rsa ,
	.Pa ~/.ssh/id_dsa
	and
	.Pa ~/.ssh/identity .
	If the identity has a passphrase,
	.Xr ssh-add 1
	asks for the passphrase (using a small X11 application if running
	under X11, or from the terminal if running without X).
	It then sends the identity to the agent.
	Several identities can be stored in the
	agent; the agent can automatically use any of these identities.
	.Ic ssh-add -l
	displays the identities currently held by the agent.
	.Pp
	The idea is that the agent is run in the user's local PC, laptop, or
	terminal.
	Authentication data need not be stored on any other
	machine, and authentication passphrases never go over the network.
	However, the connection to the agent is forwarded over SSH
	remote logins, and the user can thus use the privileges given by the
	identities anywhere in the network in a secure way.
	.Pp
	There are two main ways to get an agent set up:
	The first is that the agent starts a new subcommand into which some environment
	variables are exported, eg
	.Cm ssh-agent xterm & .
	The second is that the agent prints the needed shell commands (either
	.Xr sh 1
	or
	.Xr csh 1
	syntax can be generated) which can be evalled in the calling shell, eg
	.Cm eval `ssh-agent -s`
	for Bourne-type shells such as
	.Xr sh 1
	or
	.Xr ksh 1
	and
	.Cm eval `ssh-agent -c`
	for
	.Xr csh 1
	and derivatives.
	.Pp
	Later
	.Xr ssh 1
	looks at these variables and uses them to establish a connection to the agent.
	.Pp
	The agent will never send a private key over its request channel.
	Instead, operations that require a private key will be performed
	by the agent, and the result will be returned to the requester.
	This way, private keys are not exposed to clients using the agent.
	.Pp
	A unix-domain socket is created
	and the name of this socket is stored in the
	.Ev SSH_AUTH_SOCK
	environment
	variable.
	The socket is made accessible only to the current user.
	This method is easily abused by root or another instance of the same
	user.
	.Pp
	The
	.Ev SSH_AGENT_PID
	environment variable holds the agent's process ID.
	.Pp
	The agent exits automatically when the command given on the command
	line terminates.
	.Sh FILES
	.Bl -tag -width Ds
	.It Pa ~/.ssh/identity
	Contains the protocol version 1 RSA authentication identity of the user.
	.It Pa ~/.ssh/id_dsa
	Contains the protocol version 2 DSA authentication identity of the user.
	.It Pa ~/.ssh/id_rsa
	Contains the protocol version 2 RSA authentication identity of the user.
	.It Pa /tmp/ssh-XXXXXXXXXX/agent.\(Ltppid\(Gt
	Unix-domain sockets used to contain the connection to the
	authentication agent.
	These sockets should only be readable by the owner.
	The sockets should get automatically removed when the agent exits.
	.El
	.Sh SEE ALSO
	.Xr ssh 1 ,
	.Xr ssh-add 1 ,
	.Xr ssh-keygen 1 ,
	.Xr sshd 8
	.Sh AUTHORS
	OpenSSH is a derivative of the original and free
	ssh 1.2.12 release by Tatu Ylonen.
	Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
	Theo de Raadt and Dug Song
	removed many bugs, re-added newer features and
	created OpenSSH.
	Markus Friedl contributed the support for SSH
	protocol versions 1.5 and 2.0.