ssh-keygen —
authentication key generation, management and conversion
ssh-keygen |
[-q] [-b
bits] [-t
type] [-N
new_passphrase] [-C
comment] [-f
output_keyfile] |
ssh-keygen |
-p [-P
old_passphrase] [-N
new_passphrase] [-f
keyfile] |
ssh-keygen |
-i [-f
input_keyfile] |
ssh-keygen |
-e [-f
input_keyfile] |
ssh-keygen |
-y [-f
input_keyfile] |
ssh-keygen |
-c [-P
passphrase] [-C
comment] [-f
keyfile] |
ssh-keygen |
-l [-f
input_keyfile] |
ssh-keygen |
-B [-f
input_keyfile] |
ssh-keygen |
-U reader
[-f input_keyfile] |
ssh-keygen generates, manages and converts
authentication keys for ssh(1).
ssh-keygen defaults to generating a RSA1 key for use
by SSH protocol version 1. Specifying the -t option
instead creates a key for use by SSH protocol version 2.
Normally each user wishing to use SSH with RSA or DSA
authentication runs this once to create the authentication key in
$HOME/.ssh/identity,
$HOME/.ssh/id_dsa or
$HOME/.ssh/id_rsa. Additionally, the system
administrator may use this to generate host keys, as seen in
/etc/rc.
Normally this program generates the key and asks for a file in
which to store the private key. The public key is stored in a file with the
same name but “.pub” appended. The program also asks for a
passphrase. The passphrase may be empty to indicate no passphrase (host keys
must have an empty passphrase), or it may be a string of arbitrary length.
Good passphrases are 10-30 characters long and are not simple sentences or
otherwise easily guessable (English prose has only 1-2 bits of entropy per
character, and provides very bad passphrases). The passphrase can be changed
later by using the -p option.
There is no way to recover a lost passphrase. If the passphrase is
lost or forgotten, a new key must be generated and copied to the
corresponding public key to other machines.
For RSA1 keys, there is also a comment field in the key file that
is only for convenience to the user to help identify the key. The comment
can tell what the key is for, or whatever is useful. The comment is
initialized to “user@host” when the key is created, but can be
changed using the -c option.
After a key is generated, instructions below detail where the keys
should be placed to be activated.
The options are as follows:
-b
bits- Specifies the number of bits in the key to create. Minimum is 512 bits.
Generally 1024 bits is considered sufficient, and key sizes above that no
longer improve security but make things slower. The default is 1024
bits.
-c- Requests changing the comment in the private and public key files. This
operation is only supported for RSA1 keys. The program will prompt for the
file containing the private keys, for the passphrase if the key has one,
and for the new comment.
-e- This option will read a private or public OpenSSH key file and print the
key in a ‘SECSH Public Key File Format’ to stdout. This
option allows exporting keys for use by several commercial SSH
implementations.
-f
filename- Specifies the filename of the key file.
-i- This option will read an unencrypted private (or public) key file in
SSH2-compatible format and print an OpenSSH compatible private (or public)
key to stdout.
ssh-keygen also reads the
‘SECSH Public Key File Format’. This option allows importing
keys from several commercial SSH implementations.
-l- Show fingerprint of specified public key file. Private RSA1 keys are also
supported. For RSA and DSA keys
ssh-keygen tries
to find the matching public key file and prints its fingerprint.
-p- Requests changing the passphrase of a private key file instead of creating
a new private key. The program will prompt for the file containing the
private key, for the old passphrase, and twice for the new
passphrase.
-q- Silence
ssh-keygen. Used by
/etc/rc when creating a new key.
-y- This option will read a private OpenSSH format file and print an OpenSSH
public key to stdout.
-t
type- Specifies the type of the key to create. The possible values are
“rsa1” for protocol version 1 and “rsa” or
“dsa” for protocol version 2. The default is
“rsa1”.
-B- Show the bubblebabble digest of specified private or public key file.
-C
comment- Provides the new comment.
-D
reader- Download the RSA public key stored in the smartcard in
reader.
-N
new_passphrase- Provides the new passphrase.
-P
passphrase- Provides the (old) passphrase.
-U
reader- Upload an existing RSA private key into the smartcard in
reader.
- $HOME/.ssh/identity
- Contains the protocol version 1 RSA authentication identity of the user.
This file should not be readable by anyone but the user. It is possible to
specify a passphrase when generating the key; that passphrase will be used
to encrypt the private part of this file using 3DES. This file is not
automatically accessed by
ssh-keygen but it is
offered as the default file for the private key. ssh(1)
will read this file when a login attempt is made.
- $HOME/.ssh/identity.pub
- Contains the protocol version 1 RSA public key for authentication. The
contents of this file should be added to
$HOME/.ssh/authorized_keys on all machines where
the user wishes to log in using RSA authentication. There is no need to
keep the contents of this file secret.
- $HOME/.ssh/id_dsa
- Contains the protocol version 2 DSA authentication identity of the user.
This file should not be readable by anyone but the user. It is possible to
specify a passphrase when generating the key; that passphrase will be used
to encrypt the private part of this file using 3DES. This file is not
automatically accessed by
ssh-keygen but it is
offered as the default file for the private key. ssh(1)
will read this file when a login attempt is made.
- $HOME/.ssh/id_dsa.pub
- Contains the protocol version 2 DSA public key for authentication. The
contents of this file should be added to
$HOME/.ssh/authorized_keys on all machines where
the user wishes to log in using public key authentication. There is no
need to keep the contents of this file secret.
- $HOME/.ssh/id_rsa
- Contains the protocol version 2 RSA authentication identity of the user.
This file should not be readable by anyone but the user. It is possible to
specify a passphrase when generating the key; that passphrase will be used
to encrypt the private part of this file using 3DES. This file is not
automatically accessed by
ssh-keygen but it is
offered as the default file for the private key. ssh(1)
will read this file when a login attempt is made.
- $HOME/.ssh/id_rsa.pub
- Contains the protocol version 2 RSA public key for authentication. The
contents of this file should be added to
$HOME/.ssh/authorized_keys on all machines where
the user wishes to log in using public key authentication. There is no
need to keep the contents of this file secret.
OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu
Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt
and Dug Song removed many bugs, re-added newer features and created OpenSSH.
Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0.
ssh(1), ssh-add(1),
ssh-agent(1), sshd(8)
J. Galbraith and
R. Thayer, SECSH Public Key File
Format,
draft-ietf-secsh-publickeyfile-01.txt,
March 2001, work in progress
material.