HTTPS File Download Example/ TLS Client

This application downloads a file from an HTTPS server (developer.mbed.org) and looks for a specific string in that file.

This example is implemented as a logic class (HelloHTTPS) wrapping a TCP socket and a TLS context. The logic class handles all events, leaving the main loop to just check if the process has finished.

Pre-requisites

To build and run this example the following requirements are necessary:

A computer with the following software installed:
- CMake.
- yotta. Please note that yotta has its own set of dependencies, listed in the installation instructions.
- Python.
- ARM GCC toolchain.
- A serial terminal emulator (e.g. screen, pySerial, cu).
An FRDM-K64F development board, or another board that has an ethernet port and is supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
An ethernet connection to the internet.
An ethernet cable.
A micro-USB cable.
If your OS is Windows, please follow the installation instructions for the serial port driver.

Getting started

Connect the FRDM-K64F to the internet using the ethernet cable.
Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the “OpenSDA” connector on the target board.
Navigate to the mbedtls directory supplied with your release and open a terminal.
Set the yotta target:
```
yotta target frdm-k64f-gcc
```
Check that there are no missing dependencies:
```
$ yotta ls
```
If there are missing dependencies, yotta will list them in the terminal. Please install these before proceeding.
Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yotta build
```
Copy build/frdm-k64f-gcc/test/mbedtls-test-example-tls-client.bin to your mbed board and wait until the LED next to the USB port stops blinking.
Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. Warning: for this example, the baud rate is not the default 9600, it is 115200.
Press the reset button on the board.

The output in the terminal window should look similar to this:

{timeout;120}}
{{host_test_name;default}}
{{description;mbed TLS example HTTPS client}}
{{test_id;MBEDTLS_EX_HTTPS_CLIENT}}
{{start}}


Client IP Address is 192.168.0.2
Connecting to developer.mbed.org:443
developer.mbed.org address: 217.140.101.20
TLS connection to developer.mbed.org established
Server certificate:
    cert. version     : 3
    serial number     : 11:21:4E:4B:13:27:F0:89:21:FB:70:EC:3B:B5:73:5C:FF:B9
    issuer name       : C=BE, O=GlobalSign nv-sa, CN=GlobalSign Organization Validation CA - SHA256 - G2
    subject name      : C=GB, ST=Cambridgeshire, L=Cambridge, O=ARM Ltd, CN=*.mbed.com
    issued  on        : 2015-03-05 10:31:02
    expires on        : 2016-03-05 10:31:02
    signed using      : RSA with SHA-256
    RSA key size      : 2048 bits
    basic constraints : CA=false
    subject alt name  : *.mbed.com, *.mbed.org, mbed.org, mbed.com
    key usage         : Digital Signature, Key Encipherment
    ext key usage     : TLS Web Server Authentication, TLS Web Client Authentication
Certificate verification passed

HTTPS: Received 469 chars from server
HTTPS: Received 200 OK status ... [OK]
HTTPS: Received 'Hello world!' status ... [OK]
HTTPS: Received message:

HTTP/1.1 200 OK
Server: nginx/1.7.10
Date: Mon, 17 Aug 2015 11:46:19 GMT
Content-Type: text/plain
Content-Length: 14
Connection: keep-alive
Last-Modified: Fri, 27 Jul 2012 13:30:34 GMT
Accept-Ranges: bytes
Cache-Control: max-age=36000
Expires: Mon, 17 Aug 2015 21:46:19 GMT
X-Upstream-L3: 172.17.42.1:8080
X-Upstream-L2: developer-sjc-cyan-1-nginx
X-Upstream-L1-next-hop: 217.140.101.22:8001
X-Upstream-L1: developer-sjc-cyan-border-nginx

Hello world!
{{success}}
{{end}}

Debugging the TLS connection

If you are experiencing problems with this example, you should first rule out network issues by making sure the [simple HTTP file downloader example](https://github.com/ARMmbed/mbed-example-network-private/tree/maste r/test/helloworld-tcpclient) for the TCP module works as expected. If not, please follow the debug instructions for this example.

To print out more debug information about the TLS connection, edit the file source/main.cpp and change the definition of DEBUG_LEVEL near the top of the file from 0 to a positive number:

Level 1 only prints non-zero return codes from SSL functions and information about the full certificate chain being verified.
Level 2 prints more information about internal state updates.
Level 3 is intermediate.
Level 4 (the maximum) includes full binary dumps of the packets.

If the TLS connection is failing with an error similar to:

```
mbedtls_ssl_write() failed: -0x2700 (-9984): X509 - Certificate verification failed, e.g. CRL, CA or signature check failed
Failed to fetch /media/uploads/mbed_official/hello.txt from developer.mbed.org:443
```

it probably means you need to update the contents of the SSL_CA_PEM constant (this can happen if you modify HTTPS_SERVER_NAME, or when developer.mbed.org switches to a new CA when updating its certificate). Another reason for this error may be a proxy providing a different certificate. Proxys can be used in some network configurations or for performing man-in-the-middle attacks. If you choose to ignore this error and proceed with the connection anyway, you can change the definition of UNSAFE near the top of the file from 0 to 1. Warning: this removes all security against a possible attacker, therefore use at your own risk, or for debugging only!