This application performs hashing of a buffer with SHA-256 using various APIs. It serves as a tutorial for the basic hashing APIs of mbed TLS.
To build and run this example you must have:
Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the “OpenSDA” connector on the target board.
Navigate to the mbedtls directory supplied with your release and open a terminal.
Set the yotta target:
yotta target frdm-k64f-gcc
Build mbedtls and the examples. This may take a long time if this is your first compilation:
$ yotta build
Copy build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin
to your mbed board and wait until the LED next to the USB port stops blinking.
Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.
Use the following settings:
Press the Reset button on the board.
The output in the terminal window should look like:
{{timeout;10}} {{host_test_name;default}} {{description;mbed TLS example on hashing}} {{test_id;MBEDTLS_EX_HASHING}} {{start}} Method 1: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3 Method 2: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3 Method 3: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3 Method 4: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3 DONE {{success}} {{end}}