| /** |
| * \file net.h |
| * |
| * \brief Network communication functions |
| * |
| * Copyright (C) 2006-2011, Brainspark B.V. |
| * |
| * This file is part of PolarSSL (http://www.polarssl.org) |
| * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org> |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| #ifndef POLARSSL_NET_H |
| #define POLARSSL_NET_H |
| |
| #if !defined(POLARSSL_CONFIG_FILE) |
| #include "config.h" |
| #else |
| #include POLARSSL_CONFIG_FILE |
| #endif |
| |
| #include <string.h> |
| |
| #define POLARSSL_ERR_NET_SOCKET_FAILED -0x0042 /**< Failed to open a socket. */ |
| #define POLARSSL_ERR_NET_CONNECT_FAILED -0x0044 /**< The connection to the given server / port failed. */ |
| #define POLARSSL_ERR_NET_BIND_FAILED -0x0046 /**< Binding of the socket failed. */ |
| #define POLARSSL_ERR_NET_LISTEN_FAILED -0x0048 /**< Could not listen on the socket. */ |
| #define POLARSSL_ERR_NET_ACCEPT_FAILED -0x004A /**< Could not accept the incoming connection. */ |
| #define POLARSSL_ERR_NET_RECV_FAILED -0x004C /**< Reading information from the socket failed. */ |
| #define POLARSSL_ERR_NET_SEND_FAILED -0x004E /**< Sending information through the socket failed. */ |
| #define POLARSSL_ERR_NET_CONN_RESET -0x0050 /**< Connection was reset by peer. */ |
| #define POLARSSL_ERR_NET_WANT_READ -0x0052 /**< Connection requires a read call. */ |
| #define POLARSSL_ERR_NET_WANT_WRITE -0x0054 /**< Connection requires a write call. */ |
| #define POLARSSL_ERR_NET_UNKNOWN_HOST -0x0056 /**< Failed to get an IP address for the given hostname. */ |
| #define POLARSSL_ERR_NET_TIMEOUT -0x0011 /**< The operation timed out. */ |
| |
| #define POLARSSL_NET_LISTEN_BACKLOG 10 /**< The backlog that listen() should use. */ |
| |
| #define NET_PROTO_TCP 0 /**< The TCP transport protocol */ |
| #define NET_PROTO_UDP 1 /**< The UDP transport protocol */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * \brief Initiate a connection with host:port in the given protocol |
| * |
| * \param fd Socket to use |
| * \param host Host to connect to |
| * \param port Port to connect to |
| * \param proto Protocol: NET_PROTO_TCP or NET_PROTO_UDP |
| * |
| * \return 0 if successful, or one of: |
| * POLARSSL_ERR_NET_SOCKET_FAILED, |
| * POLARSSL_ERR_NET_UNKNOWN_HOST, |
| * POLARSSL_ERR_NET_CONNECT_FAILED |
| * |
| * \note Sets the socket in connected mode even with UDP. |
| */ |
| int net_connect( int *fd, const char *host, int port, int proto ); |
| |
| /** |
| * \brief Create a receiving socket on bind_ip:port in the chosen |
| * protocol. If bind_ip == NULL, all interfaces are bound. |
| * |
| * \param fd Socket to use |
| * \param bind_ip IP to bind to, can be NULL |
| * \param port Port number to use |
| * \param proto Protocol: NET_PROTO_TCP or NET_PROTO_UDP |
| * |
| * \return 0 if successful, or one of: |
| * POLARSSL_ERR_NET_SOCKET_FAILED, |
| * POLARSSL_ERR_NET_BIND_FAILED, |
| * POLARSSL_ERR_NET_LISTEN_FAILED |
| * |
| * \note Regardless of the protocol, opens the sockets and binds it. |
| * In addition, make the socket listening if protocol is TCP. |
| */ |
| int net_bind( int *fd, const char *bind_ip, int port, int proto ); |
| |
| /** |
| * \brief Accept a connection from a remote client |
| * |
| * \param bind_fd Relevant socket |
| * \param client_fd Will contain the connected client socket |
| * \param client_ip Will contain the client IP address |
| * Must be at least 4 bytes, or 16 if IPv6 is supported |
| * |
| * \return 0 if successful, POLARSSL_ERR_NET_ACCEPT_FAILED, or |
| * POLARSSL_ERR_NET_WANT_READ is bind_fd was set to |
| * non-blocking and accept() is blocking. |
| * |
| * \note With UDP, connects the bind_fd to the client and just copy |
| * its descriptor to client_fd. New clients will not be able |
| * to connect until you close the socket and bind a new one. |
| */ |
| int net_accept( int bind_fd, int *client_fd, void *client_ip ); |
| |
| /** |
| * \brief Set the socket blocking |
| * |
| * \param fd Socket to set |
| * |
| * \return 0 if successful, or a non-zero error code |
| */ |
| int net_set_block( int fd ); |
| |
| /** |
| * \brief Set the socket non-blocking |
| * |
| * \param fd Socket to set |
| * |
| * \return 0 if successful, or a non-zero error code |
| */ |
| int net_set_nonblock( int fd ); |
| |
| #if defined(POLARSSL_HAVE_TIME) |
| /** |
| * \brief Portable usleep helper |
| * |
| * \param usec Amount of microseconds to sleep |
| * |
| * \note Real amount of time slept will not be less than |
| * select()'s timeout granularity (typically, 10ms). |
| */ |
| void net_usleep( unsigned long usec ); |
| #endif |
| |
| /** |
| * \brief Read at most 'len' characters. If no error occurs, |
| * the actual amount read is returned. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to write to |
| * \param len Maximum length of the buffer |
| * |
| * \return This function returns the number of bytes received, |
| * or a non-zero error code; POLARSSL_ERR_NET_WANT_READ |
| * indicates read() is blocking. |
| */ |
| int net_recv( void *ctx, unsigned char *buf, size_t len ); |
| |
| /** |
| * \brief Write at most 'len' characters. If no error occurs, |
| * the actual amount read is returned. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to read from |
| * \param len The length of the buffer |
| * |
| * \return This function returns the number of bytes sent, |
| * or a non-zero error code; POLARSSL_ERR_NET_WANT_WRITE |
| * indicates write() is blocking. |
| */ |
| int net_send( void *ctx, const unsigned char *buf, size_t len ); |
| |
| #if defined(POLARSSL_HAVE_TIME) |
| /** |
| * \brief Read at most 'len' characters, blocking for at most |
| * 'timeout' seconds. If no error occurs, the actual amount |
| * read is returned. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to write to |
| * \param len Maximum length of the buffer |
| * \param timeout Maximum number of seconds to wait for data |
| * |
| * \return This function returns the number of bytes received, |
| * or a non-zero error code: |
| * POLARSSL_ERR_NET_TIMEOUT if the operation timed out, |
| * POLARSSL_ERR_NET_WANT_READ if interrupted by a signal. |
| * |
| * \note This function will block (until data becomes available or |
| * timeout is reached) even if the socket is set to |
| * non-blocking. Handling timeouts with non-blocking reads |
| * requires a different strategy. |
| */ |
| int net_recv_timeout( void *ctx, unsigned char *buf, size_t len, |
| unsigned char timeout ); |
| #endif /* POLARSSL_HAVE_TIME */ |
| |
| /** |
| * \brief Gracefully shutdown the connection |
| * |
| * \param fd The socket to close |
| */ |
| void net_close( int fd ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* net.h */ |