src/io.js - emulators/v86 - Rivoreo Source Code Repositories

 "use strict";

 /**
  * The ISA IO bus
  * Devices register their ports here
  *
  * @constructor
  */
 function IO(memory)
 {
     var memory_size = memory.size;

     this._state_skip = ["devices", "ports",];

     function get_port_description(addr)
     {
         // via seabios ioport.h
         var ports = {
             0x0004: "PORT_DMA_ADDR_2",
             0x0005: "PORT_DMA_CNT_2",
             0x000a: "PORT_DMA1_MASK_REG",
             0x000b: "PORT_DMA1_MODE_REG",
             0x000c: "PORT_DMA1_CLEAR_FF_REG",
             0x000d: "PORT_DMA1_MASTER_CLEAR",
             0x0020: "PORT_PIC1_CMD",
             0x0021: "PORT_PIC1_DATA",
             0x0040: "PORT_PIT_COUNTER0",
             0x0041: "PORT_PIT_COUNTER1",
             0x0042: "PORT_PIT_COUNTER2",
             0x0043: "PORT_PIT_MODE",
             0x0060: "PORT_PS2_DATA",
             0x0061: "PORT_PS2_CTRLB",
             0x0064: "PORT_PS2_STATUS",
             0x0070: "PORT_CMOS_INDEX",
             0x0071: "PORT_CMOS_DATA",
             0x0080: "PORT_DIAG",
             0x0081: "PORT_DMA_PAGE_2",
             0x0092: "PORT_A20",
             0x00a0: "PORT_PIC2_CMD",
             0x00a1: "PORT_PIC2_DATA",
             0x00b2: "PORT_SMI_CMD",
             0x00b3: "PORT_SMI_STATUS",
             0x00d4: "PORT_DMA2_MASK_REG",
             0x00d6: "PORT_DMA2_MODE_REG",
             0x00da: "PORT_DMA2_MASTER_CLEAR",
             0x00f0: "PORT_MATH_CLEAR",
             0x0170: "PORT_ATA2_CMD_BASE",
             0x01f0: "PORT_ATA1_CMD_BASE",
             0x0278: "PORT_LPT2",
             0x02e8: "PORT_SERIAL4",
             0x02f8: "PORT_SERIAL2",
             0x0374: "PORT_ATA2_CTRL_BASE",
             0x0378: "PORT_LPT1",
             0x03e8: "PORT_SERIAL3",
             //0x03f4: "PORT_ATA1_CTRL_BASE",
             0x03f0: "PORT_FD_BASE",
             0x03f2: "PORT_FD_DOR",
             0x03f4: "PORT_FD_STATUS",
             0x03f5: "PORT_FD_DATA",
             0x03f6: "PORT_HD_DATA",
             0x03f7: "PORT_FD_DIR",
             0x03f8: "PORT_SERIAL1",
             0x0cf8: "PORT_PCI_CMD",
             0x0cf9: "PORT_PCI_REBOOT",
             0x0cfc: "PORT_PCI_DATA",
             0x0402: "PORT_BIOS_DEBUG",
             0x0510: "PORT_QEMU_CFG_CTL",
             0x0511: "PORT_QEMU_CFG_DATA",
             0xb000: "PORT_ACPI_PM_BASE",
             0xb100: "PORT_SMB_BASE",
             0x8900: "PORT_BIOS_APM"
         };

         if(ports[addr])
         {
             return "  (" + ports[addr] + ")";
         }
         else
         {
             return "";
         }
     }

     function empty_port_read8()
     {
         return 0xFF;
     }

     function empty_port_read16()
     {
         return 0xFFFF;
     }

     function empty_port_read32()
     {
         return -1;
     }

     function empty_port_write(x)
     {
     }

     this.ports = [];
     this.devices = Array(0x10000);

     for(var i = 0; i < 0x10000; i++)
     {
         this.ports[i] = {
             read8: empty_port_read8,
             read16: empty_port_read16,
             read32: empty_port_read32,

             write8: empty_port_write,
             write16: empty_port_write,
             write32: empty_port_write,

             device: undefined,
         };
     }

     /**
      * @param {number} port_addr
      * @param {Object} device
      * @param {function():number} r8
      * @param {function():number=} r16
      * @param {function():number=} r32
      */
     this.register_read = function(port_addr, device, r8, r16, r32)
     {
         dbg_assert(typeof port_addr === "number");
         dbg_assert(typeof device === "object");
         dbg_assert(!r8 || typeof r8 === "function");
         dbg_assert(!r16 || typeof r16 === "function");
         dbg_assert(!r32 || typeof r32 === "function");
         dbg_assert(r8 || r16 || r32);

         if(DEBUG)
         {
             var fail = function(n) {
                 dbg_assert(false, "Overlapped read" + n + " " + h(port_addr, 4));
                 return -1;
             };
             if(!r8) r8 = fail.bind(this, 8);
             if(!r16) r16 = fail.bind(this, 16);
             if(!r32) r32 = fail.bind(this, 32);
         }

         if(r8) this.ports[port_addr].read8 = r8;
         if(r16) this.ports[port_addr].read16 = r16;
         if(r32) this.ports[port_addr].read32 = r32;
         this.ports[port_addr].device = device;
     };

     /**
      * @param {number} port_addr
      * @param {Object} device
      * @param {function(number)} w8
      * @param {function(number)=} w16
      * @param {function(number)=} w32
      */
     this.register_write = function(port_addr, device, w8, w16, w32)
     {
         dbg_assert(typeof port_addr === "number");
         dbg_assert(typeof device === "object");
         dbg_assert(!w8 || typeof w8 === "function");
         dbg_assert(!w16 || typeof w16 === "function");
         dbg_assert(!w32 || typeof w32 === "function");
         dbg_assert(w8 || w16 || w32);

         if(DEBUG)
         {
             var fail = function(n) {
                 dbg_assert(false, "Overlapped write" + n + " " + h(port_addr));
             };
             if(!w8) w8 = fail.bind(this, 8);
             if(!w16) w16 = fail.bind(this, 16);
             if(!w32) w32 = fail.bind(this, 32);
         }

         if(w8) this.ports[port_addr].write8 = w8;
         if(w16) this.ports[port_addr].write16 = w16;
         if(w32) this.ports[port_addr].write32 = w32;
         this.ports[port_addr].device = device;
     };

     /*
      * > Any two consecutive 8-bit ports can be treated as a 16-bit port;
      * > and four consecutive 8-bit ports can be treated as a 32-bit port
      * > http://css.csail.mit.edu/6.858/2012/readings/i386/s08_01.htm
      *
      * This info is not correct for all ports, but handled by the following functions
      *
      * Register the write of 2 or 4 consecutive 8-bit ports, 1 or 2 16-bit
      * ports and 0 or 1 32-bit ports
      */
     this.register_read_consecutive = function(port_addr, device, r8_1, r8_2, r8_3, r8_4)
     {
         dbg_assert(arguments.length === 4 || arguments.length === 6);

         function r16_1()
         {
             return r8_1.call(this) |
                     r8_2.call(this) << 8;
         }
         function r16_2()
         {
             return r8_3.call(this) |
                     r8_4.call(this) << 8;
         }
         function r32()
         {
             return r8_1.call(this) |
                     r8_2.call(this) << 8 |
                     r8_3.call(this) << 16 |
                     r8_4.call(this) << 24;
         }

         if(r8_3 && r8_4)
         {
             this.register_read(port_addr, device, r8_1, r16_1, r32);
             this.register_read(port_addr + 1, device, r8_2);
             this.register_read(port_addr + 2, device, r8_3, r16_2);
             this.register_read(port_addr + 3, device, r8_4);
         }
         else
         {
             this.register_read(port_addr, device, r8_1, r16_1);
             this.register_read(port_addr + 1, device, r8_2);
         }
     };

     this.register_write_consecutive = function(port_addr, device, w8_1, w8_2, w8_3, w8_4)
     {
         dbg_assert(arguments.length === 4 || arguments.length === 6);

         function w16_1(data)
         {
             w8_1.call(this, data & 0xFF);
             w8_2.call(this, data >> 8 & 0xFF);
         }
         function w16_2(data)
         {
             w8_3.call(this, data & 0xFF);
             w8_4.call(this, data >> 8 & 0xFF);
         }
         function w32(data)
         {
             w8_1.call(this, data & 0xFF);
             w8_2.call(this, data >> 8 & 0xFF);
             w8_3.call(this, data >> 16 & 0xFF);
             w8_4.call(this, data >>> 24);
         }

         if(w8_3 && w8_4)
         {
             this.register_write(port_addr,     device, w8_1, w16_1, w32);
             this.register_write(port_addr + 1, device, w8_2);
             this.register_write(port_addr + 2, device, w8_3, w16_2);
             this.register_write(port_addr + 3, device, w8_4);
         }
         else
         {
             this.register_write(port_addr,     device, w8_1, w16_1);
             this.register_write(port_addr + 1, device, w8_2);
         }
     };

     this.mmap_read32_shim = function(addr)
     {
         var aligned_addr = addr >>> MMAP_BLOCK_BITS;
         var fn = memory.memory_map_read8[aligned_addr];

         return fn(addr) | fn(addr + 1) << 8 |
                 fn(addr + 2) << 16 | fn(addr + 3) << 24;
     };

     this.mmap_write32_shim = function(addr, value)
     {
         var aligned_addr = addr >>> MMAP_BLOCK_BITS;
         var fn = memory.memory_map_write8[aligned_addr];

         fn(addr, value & 0xFF);
         fn(addr + 1, value >> 8 & 0xFF);
         fn(addr + 2, value >> 16 & 0xFF);
         fn(addr + 3, value >>> 24);
     };

     /**
      * @param {number} addr
      * @param {number} size
      * @param {*} read_func8
      * @param {*} write_func8
      * @param {*=} read_func32
      * @param {*=} write_func32
      */
     this.mmap_register = function(addr, size, read_func8, write_func8, read_func32, write_func32)
     {
         dbg_log("mmap_register addr=" + h(addr >>> 0, 8) + " size=" + h(size, 8), LOG_IO);

         dbg_assert((addr & MMAP_BLOCK_SIZE - 1) === 0);
         dbg_assert(size && (size & MMAP_BLOCK_SIZE - 1) === 0);

         if(!read_func32)
             read_func32 = this.mmap_read32_shim;

         if(!write_func32)
             write_func32 = this.mmap_write32_shim;

         var aligned_addr = addr >>> MMAP_BLOCK_BITS;

         for(; size > 0; aligned_addr++)
         {
             memory.memory_map_registered[aligned_addr] = 1;

             memory.memory_map_read8[aligned_addr] = read_func8;
             memory.memory_map_write8[aligned_addr] = write_func8;
             memory.memory_map_read32[aligned_addr] = read_func32;
             memory.memory_map_write32[aligned_addr] = write_func32;

             size -= MMAP_BLOCK_SIZE;
         }
     };

     for(var i = 0; (i << MMAP_BLOCK_BITS) < memory_size; i++)
     {
         // avoid sparse arrays
         memory.memory_map_read8[i] = memory.memory_map_write8[i] = undefined;
         memory.memory_map_read32[i] = memory.memory_map_write32[i] = undefined;
     }

     this.mmap_register(memory_size, 0x100000000 - memory_size,
         function(addr) {
             // read outside of the memory size
             dbg_log("Read from unmapped memory space, addr=" + h(addr >>> 0, 8), LOG_IO);
             return 0xFF;
         },
         function(addr, value) {
             // write outside of the memory size
             dbg_log("Write to unmapped memory space, addr=" + h(addr >>> 0, 8) + " value=" + h(value, 2), LOG_IO);
         },
         function(addr) {
             dbg_log("Read from unmapped memory space, addr=" + h(addr >>> 0, 8), LOG_IO);
             return -1;
         },
         function(addr, value) {
             dbg_log("Write to unmapped memory space, addr=" + h(addr >>> 0, 8) + " value=" + h(value >>> 0, 8), LOG_IO);
         }
     );

     this.in_mmap_range = function(start, count)
     {
         start >>>= 0;
         count >>>= 0;

         var end = start + count;

         if(end >= memory_size)
         {
             return true;
         }

         //dbg_log("in_mmap_range start=" + start + " count=" + count);
         start &= ~(MMAP_BLOCK_SIZE - 1);

         while(start < end)
         {
             if(memory.memory_map_registered[start >> MMAP_BLOCK_BITS])
             {
                 return true;
             }

             start += MMAP_BLOCK_SIZE;
         }

         return false;
     };

     this.port_write8 = function(port_addr, data)
     {
         var entry = this.ports[port_addr];

         if(entry.write8 === empty_port_write)
         {
             dbg_log(
                 "write8 port #" + h(port_addr, 4) + " <- " + h(data, 2) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.write8.call(entry.device, data);
     };

     this.port_write16 = function(port_addr, data)
     {
         var entry = this.ports[port_addr];

         if(entry.write16 === empty_port_write)
         {
             dbg_log(
                 "write16 port #" + h(port_addr, 4) + " <- " + h(data, 4) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.write16.call(entry.device, data);
     };

     this.port_write32 = function(port_addr, data)
     {
         var entry = this.ports[port_addr];

         if(entry.write32 === empty_port_write)
         {
             dbg_log(
                 "write32 port #" + h(port_addr, 4) + " <- " + h(data, 8) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.write32.call(entry.device, data);
     };

     this.port_read8 = function(port_addr)
     {
         var entry = this.ports[port_addr];

         if(entry.read8 === empty_port_read8)
         {
             dbg_log(
                 "read8 port  #" + h(port_addr, 4) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.read8.call(entry.device);
     };

     this.port_read16 = function(port_addr)
     {
         var entry = this.ports[port_addr];

         if(entry.read16 === empty_port_read16)
         {
             dbg_log(
                 "read16 port  #" + h(port_addr, 4) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.read16.call(entry.device);
     };

     this.port_read32 = function(port_addr)
     {
         var entry = this.ports[port_addr];

         if(entry.read32 === empty_port_read32)
         {
             dbg_log(
                 "read32 port  #" + h(port_addr, 4) + get_port_description(port_addr),
                 LOG_IO
             );
         }
         return entry.read32.call(entry.device);
     };
 }
	"use strict";

	/**
	* The ISA IO bus
	* Devices register their ports here
	*
	* @constructor
	*/
	function IO(memory)
	{
	var memory_size = memory.size;

	this._state_skip = ["devices", "ports",];

	function get_port_description(addr)
	{
	// via seabios ioport.h
	var ports = {
	0x0004: "PORT_DMA_ADDR_2",
	0x0005: "PORT_DMA_CNT_2",
	0x000a: "PORT_DMA1_MASK_REG",
	0x000b: "PORT_DMA1_MODE_REG",
	0x000c: "PORT_DMA1_CLEAR_FF_REG",
	0x000d: "PORT_DMA1_MASTER_CLEAR",
	0x0020: "PORT_PIC1_CMD",
	0x0021: "PORT_PIC1_DATA",
	0x0040: "PORT_PIT_COUNTER0",
	0x0041: "PORT_PIT_COUNTER1",
	0x0042: "PORT_PIT_COUNTER2",
	0x0043: "PORT_PIT_MODE",
	0x0060: "PORT_PS2_DATA",
	0x0061: "PORT_PS2_CTRLB",
	0x0064: "PORT_PS2_STATUS",
	0x0070: "PORT_CMOS_INDEX",
	0x0071: "PORT_CMOS_DATA",
	0x0080: "PORT_DIAG",
	0x0081: "PORT_DMA_PAGE_2",
	0x0092: "PORT_A20",
	0x00a0: "PORT_PIC2_CMD",
	0x00a1: "PORT_PIC2_DATA",
	0x00b2: "PORT_SMI_CMD",
	0x00b3: "PORT_SMI_STATUS",
	0x00d4: "PORT_DMA2_MASK_REG",
	0x00d6: "PORT_DMA2_MODE_REG",
	0x00da: "PORT_DMA2_MASTER_CLEAR",
	0x00f0: "PORT_MATH_CLEAR",
	0x0170: "PORT_ATA2_CMD_BASE",
	0x01f0: "PORT_ATA1_CMD_BASE",
	0x0278: "PORT_LPT2",
	0x02e8: "PORT_SERIAL4",
	0x02f8: "PORT_SERIAL2",
	0x0374: "PORT_ATA2_CTRL_BASE",
	0x0378: "PORT_LPT1",
	0x03e8: "PORT_SERIAL3",
	//0x03f4: "PORT_ATA1_CTRL_BASE",
	0x03f0: "PORT_FD_BASE",
	0x03f2: "PORT_FD_DOR",
	0x03f4: "PORT_FD_STATUS",
	0x03f5: "PORT_FD_DATA",
	0x03f6: "PORT_HD_DATA",
	0x03f7: "PORT_FD_DIR",
	0x03f8: "PORT_SERIAL1",
	0x0cf8: "PORT_PCI_CMD",
	0x0cf9: "PORT_PCI_REBOOT",
	0x0cfc: "PORT_PCI_DATA",
	0x0402: "PORT_BIOS_DEBUG",
	0x0510: "PORT_QEMU_CFG_CTL",
	0x0511: "PORT_QEMU_CFG_DATA",
	0xb000: "PORT_ACPI_PM_BASE",
	0xb100: "PORT_SMB_BASE",
	0x8900: "PORT_BIOS_APM"
	};

	if(ports[addr])
	{
	return " (" + ports[addr] + ")";
	}
	else
	{
	return "";
	}
	}

	function empty_port_read8()
	{
	return 0xFF;
	}

	function empty_port_read16()
	{
	return 0xFFFF;
	}

	function empty_port_read32()
	{
	return -1;
	}

	function empty_port_write(x)
	{
	}

	this.ports = [];
	this.devices = Array(0x10000);

	for(var i = 0; i < 0x10000; i++)
	{
	this.ports[i] = {
	read8: empty_port_read8,
	read16: empty_port_read16,
	read32: empty_port_read32,

	write8: empty_port_write,
	write16: empty_port_write,
	write32: empty_port_write,

	device: undefined,
	};
	}

	/**
	* @param {number} port_addr
	* @param {Object} device
	* @param {function():number} r8
	* @param {function():number=} r16
	* @param {function():number=} r32
	*/
	this.register_read = function(port_addr, device, r8, r16, r32)
	{
	dbg_assert(typeof port_addr === "number");
	dbg_assert(typeof device === "object");
	dbg_assert(!r8 \|\| typeof r8 === "function");
	dbg_assert(!r16 \|\| typeof r16 === "function");
	dbg_assert(!r32 \|\| typeof r32 === "function");
	dbg_assert(r8 \|\| r16 \|\| r32);

	if(DEBUG)
	{
	var fail = function(n) {
	dbg_assert(false, "Overlapped read" + n + " " + h(port_addr, 4));
	return -1;
	};
	if(!r8) r8 = fail.bind(this, 8);
	if(!r16) r16 = fail.bind(this, 16);
	if(!r32) r32 = fail.bind(this, 32);
	}

	if(r8) this.ports[port_addr].read8 = r8;
	if(r16) this.ports[port_addr].read16 = r16;
	if(r32) this.ports[port_addr].read32 = r32;
	this.ports[port_addr].device = device;
	};

	/**
	* @param {number} port_addr
	* @param {Object} device
	* @param {function(number)} w8
	* @param {function(number)=} w16
	* @param {function(number)=} w32
	*/
	this.register_write = function(port_addr, device, w8, w16, w32)
	{
	dbg_assert(typeof port_addr === "number");
	dbg_assert(typeof device === "object");
	dbg_assert(!w8 \|\| typeof w8 === "function");
	dbg_assert(!w16 \|\| typeof w16 === "function");
	dbg_assert(!w32 \|\| typeof w32 === "function");
	dbg_assert(w8 \|\| w16 \|\| w32);

	if(DEBUG)
	{
	var fail = function(n) {
	dbg_assert(false, "Overlapped write" + n + " " + h(port_addr));
	};
	if(!w8) w8 = fail.bind(this, 8);
	if(!w16) w16 = fail.bind(this, 16);
	if(!w32) w32 = fail.bind(this, 32);
	}

	if(w8) this.ports[port_addr].write8 = w8;
	if(w16) this.ports[port_addr].write16 = w16;
	if(w32) this.ports[port_addr].write32 = w32;
	this.ports[port_addr].device = device;
	};

	/*
	* > Any two consecutive 8-bit ports can be treated as a 16-bit port;
	* > and four consecutive 8-bit ports can be treated as a 32-bit port
	* > http://css.csail.mit.edu/6.858/2012/readings/i386/s08_01.htm
	*
	* This info is not correct for all ports, but handled by the following functions
	*
	* Register the write of 2 or 4 consecutive 8-bit ports, 1 or 2 16-bit
	* ports and 0 or 1 32-bit ports
	*/
	this.register_read_consecutive = function(port_addr, device, r8_1, r8_2, r8_3, r8_4)
	{
	dbg_assert(arguments.length === 4 \|\| arguments.length === 6);

	function r16_1()
	{
	return r8_1.call(this) \|
	r8_2.call(this) << 8;
	}
	function r16_2()
	{
	return r8_3.call(this) \|
	r8_4.call(this) << 8;
	}
	function r32()
	{
	return r8_1.call(this) \|
	r8_2.call(this) << 8 \|
	r8_3.call(this) << 16 \|
	r8_4.call(this) << 24;
	}

	if(r8_3 && r8_4)
	{
	this.register_read(port_addr, device, r8_1, r16_1, r32);
	this.register_read(port_addr + 1, device, r8_2);
	this.register_read(port_addr + 2, device, r8_3, r16_2);
	this.register_read(port_addr + 3, device, r8_4);
	}
	else
	{
	this.register_read(port_addr, device, r8_1, r16_1);
	this.register_read(port_addr + 1, device, r8_2);
	}
	};

	this.register_write_consecutive = function(port_addr, device, w8_1, w8_2, w8_3, w8_4)
	{
	dbg_assert(arguments.length === 4 \|\| arguments.length === 6);

	function w16_1(data)
	{
	w8_1.call(this, data & 0xFF);
	w8_2.call(this, data >> 8 & 0xFF);
	}
	function w16_2(data)
	{
	w8_3.call(this, data & 0xFF);
	w8_4.call(this, data >> 8 & 0xFF);
	}
	function w32(data)
	{
	w8_1.call(this, data & 0xFF);
	w8_2.call(this, data >> 8 & 0xFF);
	w8_3.call(this, data >> 16 & 0xFF);
	w8_4.call(this, data >>> 24);
	}

	if(w8_3 && w8_4)
	{
	this.register_write(port_addr, device, w8_1, w16_1, w32);
	this.register_write(port_addr + 1, device, w8_2);
	this.register_write(port_addr + 2, device, w8_3, w16_2);
	this.register_write(port_addr + 3, device, w8_4);
	}
	else
	{
	this.register_write(port_addr, device, w8_1, w16_1);
	this.register_write(port_addr + 1, device, w8_2);
	}
	};

	this.mmap_read32_shim = function(addr)
	{
	var aligned_addr = addr >>> MMAP_BLOCK_BITS;
	var fn = memory.memory_map_read8[aligned_addr];

	return fn(addr) \| fn(addr + 1) << 8 \|
	fn(addr + 2) << 16 \| fn(addr + 3) << 24;
	};

	this.mmap_write32_shim = function(addr, value)
	{
	var aligned_addr = addr >>> MMAP_BLOCK_BITS;
	var fn = memory.memory_map_write8[aligned_addr];

	fn(addr, value & 0xFF);
	fn(addr + 1, value >> 8 & 0xFF);
	fn(addr + 2, value >> 16 & 0xFF);
	fn(addr + 3, value >>> 24);
	};

	/**
	* @param {number} addr
	* @param {number} size
	* @param {*} read_func8
	* @param {*} write_func8
	* @param {*=} read_func32
	* @param {*=} write_func32
	*/
	this.mmap_register = function(addr, size, read_func8, write_func8, read_func32, write_func32)
	{
	dbg_log("mmap_register addr=" + h(addr >>> 0, 8) + " size=" + h(size, 8), LOG_IO);

	dbg_assert((addr & MMAP_BLOCK_SIZE - 1) === 0);
	dbg_assert(size && (size & MMAP_BLOCK_SIZE - 1) === 0);

	if(!read_func32)
	read_func32 = this.mmap_read32_shim;

	if(!write_func32)
	write_func32 = this.mmap_write32_shim;

	var aligned_addr = addr >>> MMAP_BLOCK_BITS;

	for(; size > 0; aligned_addr++)
	{
	memory.memory_map_registered[aligned_addr] = 1;

	memory.memory_map_read8[aligned_addr] = read_func8;
	memory.memory_map_write8[aligned_addr] = write_func8;
	memory.memory_map_read32[aligned_addr] = read_func32;
	memory.memory_map_write32[aligned_addr] = write_func32;

	size -= MMAP_BLOCK_SIZE;
	}
	};

	for(var i = 0; (i << MMAP_BLOCK_BITS) < memory_size; i++)
	{
	// avoid sparse arrays
	memory.memory_map_read8[i] = memory.memory_map_write8[i] = undefined;
	memory.memory_map_read32[i] = memory.memory_map_write32[i] = undefined;
	}

	this.mmap_register(memory_size, 0x100000000 - memory_size,
	function(addr) {
	// read outside of the memory size
	dbg_log("Read from unmapped memory space, addr=" + h(addr >>> 0, 8), LOG_IO);
	return 0xFF;
	},
	function(addr, value) {
	// write outside of the memory size
	dbg_log("Write to unmapped memory space, addr=" + h(addr >>> 0, 8) + " value=" + h(value, 2), LOG_IO);
	},
	function(addr) {
	dbg_log("Read from unmapped memory space, addr=" + h(addr >>> 0, 8), LOG_IO);
	return -1;
	},
	function(addr, value) {
	dbg_log("Write to unmapped memory space, addr=" + h(addr >>> 0, 8) + " value=" + h(value >>> 0, 8), LOG_IO);
	}
	);

	this.in_mmap_range = function(start, count)
	{
	start >>>= 0;
	count >>>= 0;

	var end = start + count;

	if(end >= memory_size)
	{
	return true;
	}

	//dbg_log("in_mmap_range start=" + start + " count=" + count);
	start &= ~(MMAP_BLOCK_SIZE - 1);

	while(start < end)
	{
	if(memory.memory_map_registered[start >> MMAP_BLOCK_BITS])
	{
	return true;
	}

	start += MMAP_BLOCK_SIZE;
	}

	return false;
	};

	this.port_write8 = function(port_addr, data)
	{
	var entry = this.ports[port_addr];

	if(entry.write8 === empty_port_write)
	{
	dbg_log(
	"write8 port #" + h(port_addr, 4) + " <- " + h(data, 2) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.write8.call(entry.device, data);
	};

	this.port_write16 = function(port_addr, data)
	{
	var entry = this.ports[port_addr];

	if(entry.write16 === empty_port_write)
	{
	dbg_log(
	"write16 port #" + h(port_addr, 4) + " <- " + h(data, 4) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.write16.call(entry.device, data);
	};

	this.port_write32 = function(port_addr, data)
	{
	var entry = this.ports[port_addr];

	if(entry.write32 === empty_port_write)
	{
	dbg_log(
	"write32 port #" + h(port_addr, 4) + " <- " + h(data, 8) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.write32.call(entry.device, data);
	};

	this.port_read8 = function(port_addr)
	{
	var entry = this.ports[port_addr];

	if(entry.read8 === empty_port_read8)
	{
	dbg_log(
	"read8 port #" + h(port_addr, 4) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.read8.call(entry.device);
	};

	this.port_read16 = function(port_addr)
	{
	var entry = this.ports[port_addr];

	if(entry.read16 === empty_port_read16)
	{
	dbg_log(
	"read16 port #" + h(port_addr, 4) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.read16.call(entry.device);
	};

	this.port_read32 = function(port_addr)
	{
	var entry = this.ports[port_addr];

	if(entry.read32 === empty_port_read32)
	{
	dbg_log(
	"read32 port #" + h(port_addr, 4) + get_port_description(port_addr),
	LOG_IO
	);
	}
	return entry.read32.call(entry.device);
	};
	}