| "use strict"; |
| |
| var |
| /** @const */ PCI_VENDOR_ID = 0x00 /* 16 bits */ |
| /** @const */ ,PCI_DEVICE_ID = 0x02 /* 16 bits */ |
| /** @const */ ,PCI_COMMAND = 0x04 /* 16 bits */ |
| /** @const */ ,PCI_BASE_ADDRESS_0 = 0x10 /* 32 bits */ |
| /** @const */ ,PCI_BASE_ADDRESS_1 = 0x14 /* 32 bits [htype 0,1 only] */ |
| /** @const */ ,PCI_BASE_ADDRESS_2 = 0x18 /* 32 bits [htype 0 only] */ |
| /** @const */ ,PCI_BASE_ADDRESS_3 = 0x1c /* 32 bits */ |
| /** @const */ ,PCI_BASE_ADDRESS_4 = 0x20 /* 32 bits */ |
| /** @const */ ,PCI_BASE_ADDRESS_5 = 0x24 /* 32 bits */ |
| /** @const */ ,PCI_INTERRUPT_LINE = 0x3c /* 8 bits */ |
| /** @const */ ,PCI_CLASS_REVISION = 0x08; /* High 24 bits are class, low 8 revision */ |
| |
| var |
| /** @const */ PCI_CONFIG_ADDRESS = 0xCF8, |
| /** @const */ PCI_CONFIG_DATA = 0xCFC; |
| |
| /** |
| * @constructor |
| * @param {CPU} cpu |
| */ |
| function PCI(cpu) |
| { |
| this.pci_addr = new Uint8Array(4); |
| this.pci_value = new Uint8Array(4); |
| this.pci_response = new Uint8Array(4); |
| this.pci_status = new Uint8Array(4); |
| |
| this.pci_addr32 = new Int32Array(this.pci_addr.buffer); |
| this.pci_value32 = new Int32Array(this.pci_value.buffer); |
| this.pci_response32 = new Int32Array(this.pci_response.buffer); |
| this.pci_status32 = new Int32Array(this.pci_status.buffer); |
| |
| this.device_spaces = []; |
| this.devices = []; |
| this.original_bars = []; |
| |
| for(var i = 0; i < 256; i++) |
| { |
| this.device_spaces[i] = undefined; |
| this.devices[i] = undefined; |
| this.original_bars[i] = undefined; |
| } |
| |
| this.io = cpu.io; |
| |
| /* |
| cpu.io.register_write(0xCF9, function(value) |
| { |
| dbg_log("PCI reboot: " + h(value, 2), LOG_PCI); |
| |
| // PCI reboot |
| if(value & 6) |
| { |
| cpu_restart(); |
| } |
| });*/ |
| |
| cpu.io.register_write_consecutive(PCI_CONFIG_DATA, this, |
| function(out_byte) |
| { |
| dbg_log("PCI data0: " + h(out_byte, 2) + " addr=" + h(this.pci_addr32[0] >>> 0), LOG_PCI); |
| this.pci_value[0] = out_byte; |
| }, |
| function(out_byte) |
| { |
| dbg_log("PCI data1: " + h(out_byte, 2) + " addr=" + h(this.pci_addr32[0] >>> 0), LOG_PCI); |
| this.pci_value[1] = out_byte; |
| }, |
| function(out_byte) |
| { |
| dbg_log("PCI data2: " + h(out_byte, 2) + " addr=" + h(this.pci_addr32[0] >>> 0), LOG_PCI); |
| this.pci_value[2] = out_byte; |
| }, |
| function(out_byte) |
| { |
| dbg_log("PCI data3: " + h(out_byte, 2) + " addr=" + h(this.pci_addr32[0] >>> 0), LOG_PCI); |
| this.pci_value[3] = out_byte; |
| this.pci_write(); |
| } |
| ); |
| |
| cpu.io.register_read_consecutive(PCI_CONFIG_DATA, this, |
| function() |
| { |
| return this.pci_response[0]; |
| }, |
| function() |
| { |
| return this.pci_response[1]; |
| }, |
| function() |
| { |
| return this.pci_response[2]; |
| }, |
| function() |
| { |
| return this.pci_response[3]; |
| } |
| ); |
| |
| cpu.io.register_read_consecutive(PCI_CONFIG_ADDRESS, this, |
| function() |
| { |
| return this.pci_status[0]; |
| }, |
| function() |
| { |
| return this.pci_status[1]; |
| }, |
| function() |
| { |
| return this.pci_status[2]; |
| }, |
| function() |
| { |
| return this.pci_status[3]; |
| } |
| ); |
| |
| cpu.io.register_write_consecutive(PCI_CONFIG_ADDRESS, this, |
| function(out_byte) |
| { |
| this.pci_addr[0] = out_byte; |
| }, |
| function(out_byte) |
| { |
| this.pci_addr[1] = out_byte; |
| }, |
| function(out_byte) |
| { |
| this.pci_addr[2] = out_byte; |
| }, |
| function(out_byte) |
| { |
| this.pci_addr[3] = out_byte; |
| this.pci_query(); |
| } |
| ); |
| |
| |
| // Some experimental PCI devices taken from my PC: |
| |
| // 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02) |
| //var host_bridge = { |
| // pci_id: 0, |
| // pci_space: [ |
| // 0x86, 0x80, 0x20, 0x2e, 0x06, 0x00, 0x90, 0x20, 0x02, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, |
| // 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| // 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x43, 0x10, 0xd3, 0x82, |
| // 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| // ], |
| // pci_bars: [], |
| //}; |
| |
| var host_bridge = { |
| pci_id: 0, |
| pci_space: [ |
| // 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) |
| 0x86, 0x80, 0x37, 0x12, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| ], |
| pci_bars: [], |
| name: "82441FX PMC", |
| }; |
| this.register_device(host_bridge); |
| |
| var isa_bridge = { |
| pci_id: 1 << 3, |
| pci_space: [ |
| // 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] |
| 0x86, 0x80, 0x00, 0x70, 0x07, 0x00, 0x00, 0x02, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x80, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| ], |
| pci_bars: [], |
| name: "82371SB PIIX3 ISA", |
| }; |
| this.register_device(isa_bridge); |
| |
| // 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) |
| //this.register_device([ |
| // 0x86, 0x80, 0x4e, 0x24, 0x07, 0x01, 0x10, 0x00, 0x90, 0x01, 0x04, 0x06, 0x00, 0x00, 0x01, 0x00, |
| // 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05, 0x20, 0xe0, 0xe0, 0x80, 0x22, |
| // 0xb0, 0xfe, 0xb0, 0xfe, 0xf1, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| // 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x02, 0x00, |
| //], 0x1e << 3); |
| } |
| |
| PCI.prototype.get_state = function() |
| { |
| var state = []; |
| |
| state[0] = this.pci_addr; |
| state[1] = this.pci_value; |
| state[2] = this.pci_response; |
| state[3] = this.pci_status; |
| |
| return state; |
| }; |
| |
| PCI.prototype.set_state = function(state) |
| { |
| this.pci_addr.set(state[0]); |
| this.pci_value.set(state[1]); |
| this.pci_response.set(state[2]); |
| this.pci_status.set(state[3]); |
| }; |
| |
| PCI.prototype.pci_query = function() |
| { |
| var dbg_line = ""; |
| |
| // Bit | .31 .0 |
| // Fmt | EBBBBBBBBDDDDDFFFRRRRRR00 |
| |
| var bdf = this.pci_addr[2] << 8 | this.pci_addr[1], |
| addr = this.pci_addr[0] & 0xFC, |
| //devfn = bdf & 0xFF, |
| //bus = bdf >> 8, |
| dev = bdf >> 3 & 0x1F, |
| //fn = bdf & 7, |
| enabled = this.pci_addr[3] >> 7; |
| |
| dbg_line += "enabled=" + (enabled); |
| dbg_line += " bdf=" + h(bdf, 4); |
| dbg_line += " dev=" + h(dev, 2); |
| dbg_line += " addr=" + h(addr, 2); |
| |
| var device = this.device_spaces[bdf]; |
| |
| if(device !== undefined) |
| { |
| this.pci_status32[0] = 0x80000000 | 0; |
| |
| if(addr < device.byteLength) |
| { |
| this.pci_response32[0] = device[addr >> 2]; |
| } |
| else |
| { |
| // required by freebsd-9.1 |
| this.pci_response32[0] = 0; |
| } |
| |
| dbg_line += " " + h(this.pci_addr32[0] >>> 0, 8) + " -> " + h(this.pci_response32[0] >>> 0, 8); |
| |
| if(addr >= device.byteLength) |
| { |
| dbg_line += " (undef)"; |
| } |
| |
| dbg_log(dbg_line, LOG_PCI); |
| } |
| else |
| { |
| this.pci_response32[0] = -1; |
| this.pci_status32[0] = 0; |
| } |
| }; |
| |
| PCI.prototype.pci_write = function() |
| { |
| var bdf = this.pci_addr[2] << 8 | this.pci_addr[1], |
| addr = this.pci_addr[0] & 0xFC; |
| |
| var space = this.device_spaces[bdf], |
| device = this.devices[bdf]; |
| |
| if(!space) |
| { |
| return; |
| } |
| |
| var written = this.pci_value32[0]; |
| |
| if(addr >= 0x10 && addr < 0x28) |
| { |
| var bar_nr = addr - 0x10 >> 2; |
| var bar = device.pci_bars[bar_nr]; |
| |
| //dbg_log("BAR" + bar_nr + " changed to " + h(space[addr >> 2] >>> 0) + " dev=" + h(bdf >> 3, 2), LOG_PCI); |
| dbg_log("BAR" + bar_nr + " exists=" + (bar ? "y" : "n") + " changed to " + h(written >>> 0) + " dev=" + h(bdf >> 3, 2) + " (" + device.name + ") ", LOG_PCI); |
| |
| if(bar) |
| { |
| if((written | 3) === -1) |
| { |
| space[addr >> 2] = ~(bar.size - 1); |
| } |
| else |
| { |
| // changing isn't supported yet, reset to default |
| space[addr >> 2] = device.current_bars[bar_nr]; |
| } |
| |
| dbg_assert(!(bar.size & bar.size - 1)); |
| } |
| else |
| { |
| space[addr >> 2] = 0; |
| } |
| |
| dbg_log("BAR effective value: " + h(space[addr >> 2] >>> 0), LOG_PCI); |
| } |
| else |
| { |
| dbg_log("PCI write dev=" + h(bdf >> 3, 2) + " (" + device.name + ") " + " addr=" + h(addr, 4) + " value=" + h(written >>> 0, 8), LOG_PCI); |
| space[addr >> 2] = written; |
| } |
| }; |
| |
| PCI.prototype.register_device = function(device) |
| { |
| dbg_assert(device.pci_id !== undefined); |
| dbg_assert(device.pci_space !== undefined); |
| dbg_assert(device.pci_bars !== undefined); |
| |
| var device_id = device.pci_id; |
| |
| dbg_log("PCI register bdf=" + h(device_id) + " (" + device.name + ")", LOG_PCI); |
| |
| dbg_assert(!this.devices[device_id]); |
| dbg_assert(device.pci_space.length >= 64); |
| dbg_assert(device_id < this.devices.length); |
| |
| // convert bytewise notation from lspci to double words |
| var space = new Int32Array(new Uint8Array(device.pci_space).buffer); |
| this.device_spaces[device_id] = space; |
| this.devices[device_id] = device; |
| |
| // copy the bars so they can be restored later |
| device.current_bars = new Int32Array(6); |
| device.current_bars.set(space.subarray(4, 10)); |
| }; |