| "use strict"; |
| |
| /** |
| * @const |
| * In kHz |
| */ |
| var OSCILLATOR_FREQ = 1193.1816666; // 1.193182 MHz |
| |
| /** |
| * @constructor |
| * |
| * Programmable Interval Timer |
| */ |
| function PIT(cpu, bus) |
| { |
| /** @const @type {CPU} */ |
| this.cpu = cpu; |
| |
| this.bus = bus; |
| |
| this.counter_start_time = new Float64Array(3); |
| this.counter_start_value = new Uint16Array(3); |
| |
| this.counter_next_low = new Uint8Array(4); |
| this.counter_enabled = new Uint8Array(4); |
| this.counter_mode = new Uint8Array(4); |
| this.counter_read_mode = new Uint8Array(4); |
| |
| // 2 = latch low, 1 = latch high, 0 = no latch |
| this.counter_latch = new Uint8Array(4); |
| this.counter_latch_value = new Uint16Array(3); |
| |
| this.counter_reload = new Uint16Array(3); |
| |
| // TODO: |
| // - counter2 can be controlled by an input |
| |
| cpu.io.register_read(0x61, this, function() |
| { |
| var now = v86.microtick(); |
| |
| var ref_toggle = (now * (1000 * 1000 / 15000)) & 1; |
| var counter2_out = this.did_rollover(2, now); |
| |
| return ref_toggle << 4 | counter2_out << 5; |
| }); |
| cpu.io.register_write(0x61, this, function(data) |
| { |
| this.bus.send("pcspeaker-enable", data & 1); |
| }); |
| |
| cpu.io.register_read(0x40, this, function() { return this.counter_read(0); }); |
| cpu.io.register_read(0x41, this, function() { return this.counter_read(1); }); |
| cpu.io.register_read(0x42, this, function() { return this.counter_read(2); }); |
| |
| cpu.io.register_write(0x40, this, function(data) { this.counter_write(0, data); }); |
| cpu.io.register_write(0x41, this, function(data) { this.counter_write(1, data); }); |
| cpu.io.register_write(0x42, this, function(data) { this.counter_write(2, data); }); |
| |
| cpu.io.register_write(0x43, this, this.port43_write); |
| } |
| |
| PIT.prototype.get_state = function() |
| { |
| var state = []; |
| |
| state[0] = this.counter_next_low; |
| state[1] = this.counter_enabled; |
| state[2] = this.counter_mode; |
| state[3] = this.counter_read_mode; |
| state[4] = this.counter_latch; |
| state[5] = this.counter_latch_value; |
| state[6] = this.counter_reload; |
| state[7] = this.counter_start_time; |
| state[8] = this.counter_start_value; |
| |
| return state; |
| }; |
| |
| PIT.prototype.set_state = function(state) |
| { |
| this.counter_next_low = state[0]; |
| this.counter_enabled = state[1]; |
| this.counter_mode = state[2]; |
| this.counter_read_mode = state[3]; |
| this.counter_latch = state[4]; |
| this.counter_latch_value = state[5]; |
| this.counter_reload = state[6]; |
| this.counter_start_time = state[7]; |
| this.counter_start_value = state[8]; |
| }; |
| |
| PIT.prototype.timer = function(now, no_irq) |
| { |
| var time_to_next_interrupt = 100; |
| |
| // counter 0 produces interrupts |
| if(!no_irq) |
| { |
| if(this.counter_enabled[0] && this.did_rollover(0, now)) |
| { |
| time_to_next_interrupt = 0; |
| |
| this.counter_start_value[0] = this.get_counter_value(0, now); |
| this.counter_start_time[0] = now; |
| |
| dbg_log("pit interrupt. new value: " + this.counter_start_value[0], LOG_PIT); |
| |
| this.cpu.device_raise_irq(0); |
| var mode = this.counter_mode[0]; |
| |
| if(mode === 0) |
| { |
| this.counter_enabled[0] = 0; |
| } |
| } |
| else |
| { |
| this.cpu.device_lower_irq(0); |
| } |
| } |
| time_to_next_interrupt = 0; |
| |
| return time_to_next_interrupt; |
| }; |
| |
| PIT.prototype.get_counter_value = function(i, now) |
| { |
| if(!this.counter_enabled[i]) |
| { |
| return 0; |
| } |
| |
| var diff = now - this.counter_start_time[i]; |
| var diff_in_ticks = Math.floor(diff * OSCILLATOR_FREQ); |
| |
| var value = this.counter_start_value[i] - diff_in_ticks; |
| |
| dbg_log("diff=" + diff + " dticks=" + diff_in_ticks + " value=" + value + " reload=" + this.counter_reload[i], LOG_PIT); |
| |
| var reload = this.counter_reload[i]; |
| |
| if(value >= reload) |
| { |
| dbg_log("Warning: Counter" + i + " value " + value + " is larger than reload " + reload, LOG_PIT); |
| value %= reload; |
| } |
| else if(value < 0) |
| { |
| value = value % reload + reload; |
| } |
| |
| return value; |
| }; |
| |
| PIT.prototype.did_rollover = function(i, now) |
| { |
| var diff = now - this.counter_start_time[i]; |
| |
| if(diff < 0) |
| { |
| // should only happen after restore_state |
| dbg_log("Warning: PIT timer difference is negative, resetting"); |
| return true; |
| } |
| var diff_in_ticks = Math.floor(diff * OSCILLATOR_FREQ); |
| //dbg_log(i + ": diff=" + diff + " start_time=" + this.counter_start_time[i] + " diff_in_ticks=" + diff_in_ticks + " (" + diff * OSCILLATOR_FREQ + ") start_value=" + this.counter_start_value[i] + " did_rollover=" + (this.counter_start_value[i] < diff_in_ticks), LOG_PIT); |
| |
| return this.counter_start_value[i] < diff_in_ticks; |
| }; |
| |
| PIT.prototype.counter_read = function(i) |
| { |
| var latch = this.counter_latch[i]; |
| |
| if(latch) |
| { |
| this.counter_latch[i]--; |
| |
| if(latch === 2) |
| { |
| return this.counter_latch_value[i] & 0xFF; |
| } |
| else |
| { |
| return this.counter_latch_value[i] >> 8; |
| } |
| } |
| else |
| { |
| var next_low = this.counter_next_low[i]; |
| |
| if(this.counter_mode[i] === 3) |
| { |
| this.counter_next_low[i] ^= 1; |
| } |
| |
| var value = this.get_counter_value(i, v86.microtick()); |
| |
| if(next_low) |
| { |
| return value & 0xFF; |
| } |
| else |
| { |
| return value >> 8; |
| } |
| } |
| }; |
| |
| PIT.prototype.counter_write = function(i, value) |
| { |
| if(this.counter_next_low[i]) |
| { |
| this.counter_reload[i] = this.counter_reload[i] & ~0xFF | value; |
| } |
| else |
| { |
| this.counter_reload[i] = this.counter_reload[i] & 0xFF | value << 8; |
| } |
| |
| if(this.counter_read_mode[i] !== 3 || !this.counter_next_low[i]) |
| { |
| if(!this.counter_reload[i]) |
| { |
| this.counter_reload[i] = 0xFFFF; |
| } |
| |
| // depends on the mode, should actually |
| // happen on the first tick |
| this.counter_start_value[i] = this.counter_reload[i]; |
| |
| this.counter_enabled[i] = true; |
| |
| this.counter_start_time[i] = v86.microtick(); |
| |
| dbg_log("counter" + i + " reload=" + h(this.counter_reload[i]) + |
| " tick=" + (this.counter_reload[i] || 0x10000) / OSCILLATOR_FREQ + "ms", LOG_PIT); |
| } |
| |
| if(this.counter_read_mode[i] === 3) |
| { |
| this.counter_next_low[i] ^= 1; |
| } |
| |
| this.bus.send("pcspeaker-update", [this.counter_mode[2], this.counter_reload[2]]); |
| }; |
| |
| PIT.prototype.port43_write = function(reg_byte) |
| { |
| var mode = reg_byte >> 1 & 7, |
| binary_mode = reg_byte & 1, |
| i = reg_byte >> 6 & 3, |
| read_mode = reg_byte >> 4 & 3; |
| |
| if(i === 1) |
| { |
| dbg_log("Unimplemented timer1", LOG_PIT); |
| } |
| |
| if(i === 3) |
| { |
| dbg_log("Unimplemented read back", LOG_PIT); |
| return; |
| } |
| |
| if(read_mode === 0) |
| { |
| // latch |
| this.counter_latch[i] = 2; |
| var value = this.get_counter_value(i, v86.microtick()); |
| dbg_log("latch: " + value, LOG_PIT); |
| this.counter_latch_value[i] = value ? value - 1 : 0 |
| |
| return; |
| } |
| |
| if(mode >= 6) |
| { |
| // 6 and 7 are aliased to 2 and 3 |
| mode &= ~4; |
| } |
| |
| dbg_log("Control: mode=" + mode + " ctr=" + i + |
| " read_mode=" + read_mode + " bcd=" + binary_mode, LOG_PIT); |
| |
| if(read_mode === 1) |
| { |
| // msb |
| this.counter_next_low[i] = 0; |
| } |
| else if(read_mode === 2) |
| { |
| // lsb |
| this.counter_next_low[i] = 1; |
| } |
| else |
| { |
| // first lsb then msb |
| this.counter_next_low[i] = 1; |
| } |
| |
| if(i === 0) |
| { |
| this.cpu.device_lower_irq(0); |
| } |
| |
| if(mode === 0) |
| { |
| } |
| else if(mode === 3 || mode === 2) |
| { |
| // what is the difference |
| } |
| else |
| { |
| dbg_log("Unimplemented counter mode: " + h(mode), LOG_PIT); |
| } |
| |
| this.counter_mode[i] = mode; |
| this.counter_read_mode[i] = read_mode; |
| |
| this.bus.send("pcspeaker-update", [this.counter_mode[2], this.counter_reload[2]]); |
| }; |