| "use strict"; |
| |
| /** @const */ |
| var CPU_LOG_VERBOSE = false; |
| |
| |
| // Resources: |
| // https://pdos.csail.mit.edu/6.828/2006/readings/i386/toc.htm |
| // https://www-ssl.intel.com/content/www/us/en/processors/architectures-software-developer-manuals.html |
| // http://ref.x86asm.net/geek32.html |
| |
| |
| /** @constructor */ |
| function CPU(bus) |
| { |
| /** @type {number} */ |
| this.memory_size = 0; |
| |
| // Note: Currently unused (degrades performance and not required by any OS |
| // that we support) |
| this.a20_enabled = true; |
| |
| this.mem_page_infos = undefined; |
| |
| this.mem8 = new Uint8Array(0); |
| this.mem16 = new Uint16Array(this.mem8.buffer); |
| this.mem32s = new Int32Array(this.mem8.buffer); |
| |
| this.segment_is_null = new Uint8Array(8); |
| this.segment_limits = new Uint32Array(8); |
| //this.segment_infos = new Uint32Array(8); |
| this.segment_offsets = new Int32Array(8); |
| |
| /** |
| * Translation Lookaside Buffer |
| * @const |
| */ |
| this.tlb_data = new Int32Array(1 << 20); |
| |
| /** |
| * Information about which pages are cached in the tlb. |
| * By bit: |
| * 0 system, read |
| * 1 system, write |
| * 2 user, read |
| * 3 user, write |
| * @const |
| */ |
| this.tlb_info = new Uint8Array(1 << 20); |
| |
| /** |
| * Same as tlb_info, except it only contains global pages |
| * @const |
| */ |
| this.tlb_info_global = new Uint8Array(1 << 20); |
| |
| /** |
| * Wheter or not in protected mode |
| * @type {boolean} |
| */ |
| this.protected_mode = false; |
| |
| /** |
| * interrupt descriptor table |
| * @type {number} |
| */ |
| this.idtr_size = 0; |
| /** @type {number} */ |
| this.idtr_offset = 0; |
| |
| /** |
| * global descriptor table register |
| * @type {number} |
| */ |
| this.gdtr_size = 0; |
| /** @type {number} */ |
| this.gdtr_offset = 0; |
| |
| this.tss_size_32 = false; |
| |
| /* |
| * whether or not a page fault occured |
| */ |
| this.page_fault = false; |
| |
| this.cr = new Int32Array(8); |
| |
| /** @type {number} */ |
| this.cr[0] = 0; |
| /** @type {number} */ |
| this.cr[2] = 0; |
| /** @type {number} */ |
| this.cr[3] = 0; |
| /** @type {number} */ |
| this.cr[4] = 0; |
| |
| // current privilege level |
| /** @type {number} */ |
| this.cpl = 0; |
| |
| // if false, pages are 4 KiB, else 4 Mib |
| /** @type {number} */ |
| this.page_size_extensions = 0; |
| |
| // current operand/address size |
| /** @type {boolean} */ |
| this.is_32 = false; |
| |
| /** @type {boolean} */ |
| this.stack_size_32 = false; |
| |
| /** |
| * Was the last instruction a hlt? |
| * @type {boolean} |
| */ |
| this.in_hlt = false; |
| |
| /** @type {number} */ |
| this.last_virt_eip = 0; |
| |
| /** @type {number} */ |
| this.eip_phys = 0; |
| |
| /** @type {number} */ |
| this.last_virt_esp = 0; |
| |
| /** @type {number} */ |
| this.esp_phys = 0; |
| |
| |
| /** @type {number} */ |
| this.sysenter_cs = 0; |
| |
| /** @type {number} */ |
| this.sysenter_esp = 0; |
| |
| /** @type {number} */ |
| this.sysenter_eip = 0; |
| |
| /** @type {number} */ |
| this.prefixes = 0; |
| |
| /** @type {number} */ |
| this.flags = 0; |
| |
| /** |
| * bitmap of flags which are not updated in the flags variable |
| * changed by arithmetic instructions, so only relevant to arithmetic flags |
| * @type {number} |
| */ |
| this.flags_changed = 0; |
| |
| /** |
| * the last 2 operators and the result and size of the last arithmetic operation |
| * @type {number} |
| */ |
| this.last_op1 = 0; |
| /** @type {number} */ |
| this.last_op2 = 0; |
| /** @type {number} */ |
| this.last_op_size = 0; |
| |
| /** @type {number} */ |
| this.last_add_result = 0; |
| |
| /** @type {number} */ |
| this.last_result = 0; |
| |
| this.mul32_result = new Int32Array(2); |
| this.div32_result = new Float64Array(2); |
| |
| this.tsc_offset = 0; |
| |
| /** @type {number} */ |
| this.modrm_byte = 0; |
| |
| /** @type {number} */ |
| this.phys_addr = 0; |
| |
| /** @type {number} */ |
| this.phys_addr_high = 0; |
| |
| /** @type {!Object} */ |
| this.devices = {}; |
| |
| this.table = []; |
| |
| // paging enabled |
| /** @type {boolean} */ |
| this.paging = false; |
| |
| /** @type {number} */ |
| this.instruction_pointer = 0; |
| |
| /** @type {number} */ |
| this.previous_ip = 0; |
| |
| this.apic_enabled = true; |
| |
| /** |
| * @type {number} |
| */ |
| this.timestamp_counter = 0; |
| |
| // registers |
| this.reg32s = new Int32Array(8); |
| this.reg32 = new Uint32Array(this.reg32s.buffer); |
| this.reg16s = new Int16Array(this.reg32s.buffer); |
| this.reg16 = new Uint16Array(this.reg32s.buffer); |
| this.reg8s = new Int8Array(this.reg32s.buffer); |
| this.reg8 = new Uint8Array(this.reg32s.buffer); |
| |
| // mm0-mm7 split up into 32 bit pairs |
| this.reg_mmxs = new Int32Array(16); |
| this.reg_mmx = new Uint32Array(this.reg_mmxs.buffer); |
| this.reg_mmx8s = new Int8Array(this.reg_mmxs.buffer); |
| this.reg_mmx8 = new Uint8Array(this.reg_mmxs.buffer); |
| |
| this.reg_xmm32s = new Int32Array(8 * 4); |
| this.mxcsr = 0x1F80; |
| |
| // segment registers, tr and ldtr |
| this.sreg = new Uint16Array(8); |
| |
| // debug registers |
| this.dreg = new Int32Array(8); |
| |
| |
| // managed in io.js |
| /** @const */ this.memory_map_read8 = []; |
| /** @const */ this.memory_map_write8 = []; |
| /** @const */ this.memory_map_read32 = []; |
| /** @const */ this.memory_map_write32 = []; |
| |
| /** |
| * @const |
| * @type {{main: ArrayBuffer, vga: ArrayBuffer}} |
| */ |
| this.bios = { |
| main: null, |
| vga: null, |
| }; |
| |
| /** @type {number} */ |
| this.fw_value = 0; |
| |
| this.io = undefined; |
| this.fpu = undefined; |
| |
| this.bus = bus; |
| |
| dbg_assert(this.table16 && this.table32); |
| dbg_assert(this.table0F_16 && this.table0F_32); |
| |
| this.update_operand_size(); |
| |
| this.tsc_offset = v86.microtick(); |
| |
| this.debug_init(); |
| |
| this.init2(); |
| |
| //Object.seal(this); |
| } |
| |
| CPU.prototype.get_state = function() |
| { |
| var state = []; |
| |
| state[0] = this.memory_size; |
| state[1] = this.segment_is_null; |
| state[2] = this.segment_offsets; |
| state[3] = this.segment_limits; |
| state[4] = this.protected_mode; |
| state[5] = this.idtr_offset; |
| state[6] = this.idtr_size; |
| state[7] = this.gdtr_offset; |
| state[8] = this.gdtr_size; |
| state[9] = this.page_fault; |
| state[10] = this.cr; |
| state[11] = this.cpl; |
| state[12] = this.page_size_extensions; |
| state[13] = this.is_32; |
| |
| state[16] = this.stack_size_32; |
| state[17] = this.in_hlt; |
| state[18] = this.last_virt_eip; |
| state[19] = this.eip_phys; |
| state[20] = this.last_virt_esp; |
| state[21] = this.esp_phys; |
| state[22] = this.sysenter_cs; |
| state[23] = this.sysenter_eip; |
| state[24] = this.sysenter_esp; |
| state[25] = this.prefixes; |
| state[26] = this.flags; |
| state[27] = this.flags_changed; |
| state[28] = this.last_op1; |
| state[29] = this.last_op2; |
| state[30] = this.last_op_size; |
| state[31] = this.last_add_result; |
| state[32] = this.modrm_byte; |
| |
| state[36] = this.paging; |
| state[37] = this.instruction_pointer; |
| state[38] = this.previous_ip; |
| state[39] = this.reg32s; |
| state[40] = this.sreg; |
| state[41] = this.dreg; |
| state[42] = this.mem8; |
| state[43] = this.fpu; |
| |
| state[45] = this.devices.virtio; |
| state[46] = this.devices.apic; |
| state[47] = this.devices.rtc; |
| state[48] = this.devices.pci; |
| state[49] = this.devices.dma; |
| state[50] = this.devices.acpi; |
| state[51] = this.devices.hpet; |
| state[52] = this.devices.vga; |
| state[53] = this.devices.ps2; |
| state[54] = this.devices.uart; |
| state[55] = this.devices.fdc; |
| state[56] = this.devices.cdrom; |
| state[57] = this.devices.hda; |
| state[58] = this.devices.pit; |
| state[59] = this.devices.net; |
| state[60] = this.devices.pic; |
| state[61] = this.devices.sb16; |
| |
| state[62] = this.a20_enabled; |
| state[63] = this.fw_value; |
| |
| state[64] = this.devices.ioapic; |
| |
| state[65] = this.tss_size_32; |
| |
| state[66] = this.reg_mmxs; |
| |
| return state; |
| }; |
| |
| CPU.prototype.set_state = function(state) |
| { |
| this.memory_size = state[0]; |
| this.segment_is_null = state[1]; |
| this.segment_offsets = state[2]; |
| this.segment_limits = state[3]; |
| this.protected_mode = state[4]; |
| this.idtr_offset = state[5]; |
| this.idtr_size = state[6]; |
| this.gdtr_offset = state[7]; |
| this.gdtr_size = state[8]; |
| this.page_fault = state[9]; |
| this.cr = state[10]; |
| this.cpl = state[11]; |
| this.page_size_extensions = state[12]; |
| this.is_32 = state[13]; |
| |
| this.stack_size_32 = state[16]; |
| |
| this.in_hlt = state[17]; |
| this.last_virt_eip = state[18]; |
| this.eip_phys = state[19]; |
| this.last_virt_esp = state[20]; |
| this.esp_phys = state[21]; |
| this.sysenter_cs = state[22]; |
| this.sysenter_eip = state[23]; |
| this.sysenter_esp = state[24]; |
| this.prefixes = state[25]; |
| |
| this.flags = state[26]; |
| this.flags_changed = state[27]; |
| this.last_op1 = state[28]; |
| this.last_op2 = state[29]; |
| this.last_op_size = state[30]; |
| this.last_add_result = state[31]; |
| this.modrm_byte = state[32]; |
| |
| this.paging = state[36]; |
| this.instruction_pointer = state[37]; |
| this.previous_ip = state[38]; |
| this.reg32s = state[39]; |
| this.sreg = state[40]; |
| this.dreg = state[41]; |
| this.mem8 = state[42]; |
| this.fpu = state[43]; |
| |
| this.devices.virtio = state[45]; |
| this.devices.apic = state[46]; |
| this.devices.rtc = state[47]; |
| this.devices.pci = state[48]; |
| this.devices.dma = state[49]; |
| this.devices.acpi = state[50]; |
| this.devices.hpet = state[51]; |
| this.devices.vga = state[52]; |
| this.devices.ps2 = state[53]; |
| this.devices.uart = state[54]; |
| this.devices.fdc = state[55]; |
| this.devices.cdrom = state[56]; |
| this.devices.hda = state[57]; |
| this.devices.pit = state[58]; |
| this.devices.net = state[59]; |
| this.devices.pic = state[60]; |
| this.devices.sb16 = state[61]; |
| |
| this.a20_enabled = state[62]; |
| this.fw_value = state[63]; |
| |
| this.devices.ioapic = state[64]; |
| |
| this.tss_size_32 = state[65]; |
| |
| this.reg_mmxs = state[66]; |
| |
| this.mem16 = new Uint16Array(this.mem8.buffer, this.mem8.byteOffset, this.mem8.length >> 1); |
| this.mem32s = new Int32Array(this.mem8.buffer, this.mem8.byteOffset, this.mem8.length >> 2); |
| |
| |
| this.full_clear_tlb(); |
| // tsc_offset? |
| |
| this.reg32 = new Uint32Array(this.reg32s.buffer); |
| this.reg16s = new Int16Array(this.reg32s.buffer); |
| this.reg16 = new Uint16Array(this.reg32s.buffer); |
| this.reg8s = new Int8Array(this.reg32s.buffer); |
| this.reg8 = new Uint8Array(this.reg32s.buffer); |
| |
| this.reg_mmx = new Uint32Array(this.reg_mmxs.buffer); |
| this.reg_mmx8s = new Int8Array(this.reg_mmxs.buffer); |
| this.reg_mmx8 = new Uint8Array(this.reg_mmxs.buffer); |
| this.update_operand_size(); |
| }; |
| |
| |
| /** |
| * @return {number} time in ms until this method should becalled again |
| */ |
| CPU.prototype.main_run = function() |
| { |
| if(this.in_hlt) |
| { |
| //if(false) |
| //{ |
| // var _t = this.hlt_loop(); |
| // var t = 0; |
| //} |
| //else |
| //{ |
| var t = this.hlt_loop(); |
| //} |
| |
| if(this.in_hlt) |
| { |
| return t; |
| } |
| } |
| |
| this.do_run(); |
| |
| return 0; |
| }; |
| |
| CPU.prototype.exception_cleanup = function(e) |
| { |
| if(e === MAGIC_CPU_EXCEPTION) |
| { |
| // A legit CPU exception (for instance, a page fault happened) |
| // call_interrupt_vector has already been called at this point, |
| // so we just need to reset some state |
| |
| this.page_fault = false; |
| |
| // restore state from prefixes |
| this.clear_prefixes(); |
| } |
| else |
| { |
| console.log(e); |
| console.log(e.stack); |
| //var e = new Error(e.message); |
| //Error.captureStackTrace && Error.captureStackTrace(e); |
| throw e; |
| } |
| }; |
| |
| CPU.prototype.reboot_internal = function() |
| { |
| this.reset(); |
| this.load_bios(); |
| |
| throw MAGIC_CPU_EXCEPTION; |
| }; |
| |
| CPU.prototype.reset = function() |
| { |
| this.a20_enabled = true; |
| |
| for(let i = 0; i < 8; i++) |
| { |
| this.segment_is_null[i] = 0; |
| this.segment_limits[i] = 0; |
| //this.segment_infos = new Uint32Array(8); |
| this.segment_offsets[i] = 0; |
| } |
| |
| this.full_clear_tlb(); |
| |
| for(let i = 0; i < 8; i++) |
| { |
| this.reg32s[i] = 0; |
| this.sreg[i] = 0; |
| this.cr[i] = 0; |
| this.dreg[i] = 0; |
| } |
| |
| for(let i = 0; i < this.reg_mmxs.length; i++) |
| { |
| this.reg_mmxs[i] = 0; |
| } |
| |
| for(let i = 0; i < this.reg_xmm32s.length; i++) |
| { |
| this.reg_xmm32s[i] = 0; |
| } |
| this.mxcsr = 0x1F80; |
| |
| this.protected_mode = false; |
| |
| // http://www.sandpile.org/x86/initial.htm |
| this.idtr_size = 0; |
| this.idtr_offset = 0; |
| |
| this.gdtr_size = 0; |
| this.gdtr_offset = 0; |
| |
| this.page_fault = false; |
| this.cr[0] = 1 << 30 | 1 << 29 | 1 << 4; |
| this.cr[2] = 0; |
| this.cr[3] = 0; |
| this.cr[4] = 0; |
| this.dreg[6] = 0xFFFF0FF0|0; |
| this.dreg[7] = 0x400; |
| this.cpl = 0; |
| this.paging = false; |
| this.page_size_extensions = 0; |
| this.is_32 = false; |
| this.stack_size_32 = false; |
| this.prefixes = 0; |
| |
| this.last_virt_eip = -1; |
| this.last_virt_esp = -1; |
| |
| this.update_operand_size(); |
| |
| this.timestamp_counter = 0; |
| this.previous_ip = 0; |
| this.in_hlt = false; |
| |
| this.sysenter_cs = 0; |
| this.sysenter_esp = 0; |
| this.sysenter_eip = 0; |
| |
| this.flags = flags_default; |
| this.flags_changed = 0; |
| |
| this.last_result = 0; |
| this.last_add_result = 0; |
| this.last_op1 = 0; |
| this.last_op2 = 0; |
| this.last_op_size = 0; |
| |
| this.tsc_offset = v86.microtick(); |
| |
| this.instruction_pointer = 0xFFFF0; |
| this.switch_cs_real_mode(0xF000); |
| |
| this.switch_seg(reg_ss, 0x30); |
| this.reg16[reg_sp] = 0x100; |
| |
| if(this.devices.virtio) |
| { |
| this.devices.virtio.reset(); |
| } |
| |
| this.fw_value = 0; |
| }; |
| |
| /** @export */ |
| CPU.prototype.create_memory = function(size) |
| { |
| if(size < 1024 * 1024) |
| { |
| size = 1024 * 1024; |
| } |
| else if((size | 0) < 0) |
| { |
| size = Math.pow(2, 31) - MMAP_BLOCK_SIZE; |
| } |
| |
| size = ((size - 1) | (MMAP_BLOCK_SIZE - 1)) + 1 | 0; |
| dbg_assert((size | 0) > 0); |
| dbg_assert((size & MMAP_BLOCK_SIZE - 1) === 0); |
| |
| this.memory_size = size; |
| |
| var buffer = new ArrayBuffer(size); |
| |
| this.mem8 = new Uint8Array(buffer); |
| this.mem16 = new Uint16Array(buffer); |
| this.mem32s = new Int32Array(buffer); |
| }; |
| |
| CPU.prototype.init = function(settings, device_bus) |
| { |
| this.create_memory(typeof settings.memory_size === "number" ? |
| settings.memory_size : 1024 * 1024 * 64); |
| |
| this.reset(); |
| |
| var io = new IO(this); |
| this.io = io; |
| |
| this.bios.main = settings.bios; |
| this.bios.vga = settings.vga_bios; |
| |
| this.load_bios(); |
| |
| var a20_byte = 0; |
| |
| io.register_read(0xB3, this, function() |
| { |
| // seabios smm_relocate_and_restore |
| dbg_log("port 0xB3 read"); |
| return 0; |
| }); |
| |
| io.register_read(0x92, this, function() |
| { |
| return a20_byte; |
| }); |
| |
| io.register_write(0x92, this, function(out_byte) |
| { |
| a20_byte = out_byte; |
| }); |
| |
| io.register_read(0x511, this, function() |
| { |
| // bios config port (used by seabios and kvm-unit-test) |
| let result = this.fw_value & 0xFF; |
| this.fw_value >>>= 8; |
| return result; |
| }); |
| io.register_write(0x510, this, undefined, function(value) |
| { |
| dbg_log("bios config port, index=" + h(value)); |
| |
| if(value === FW_CFG_SIGNATURE) |
| { |
| // We could pretend to be QEMU here to control certain options in |
| // seabios, but for now this isn't needed |
| this.fw_value = 0xfab0fab0|0; |
| } |
| else if(value === FW_CFG_RAM_SIZE) |
| { |
| this.fw_value = this.memory_size; |
| } |
| else if(value === FW_CFG_NB_CPUS) |
| { |
| this.fw_value = 1; |
| } |
| else |
| { |
| dbg_assert(false, "Unimplemented fw index: " + h(value)); |
| this.fw_value = 0; |
| } |
| }); |
| |
| if(DEBUG) |
| { |
| // Use by linux for port-IO delay |
| // Avoid generating tons of debug messages |
| io.register_write(0x80, this, function(out_byte) |
| { |
| }); |
| } |
| |
| this.devices = {}; |
| |
| // TODO: Make this more configurable |
| if(settings.load_devices) |
| { |
| this.devices.pic = new PIC(this); |
| this.devices.pci = new PCI(this); |
| |
| if(ENABLE_ACPI) |
| { |
| this.devices.ioapic = new IOAPIC(this); |
| this.devices.apic = new APIC(this); |
| this.devices.acpi = new ACPI(this); |
| } |
| |
| this.devices.rtc = new RTC(this); |
| this.fill_cmos(this.devices.rtc, settings); |
| |
| this.devices.dma = new DMA(this); |
| |
| if(ENABLE_HPET) |
| { |
| this.devices.hpet = new HPET(this); |
| } |
| |
| this.devices.vga = new VGAScreen(this, device_bus, |
| settings.vga_memory_size || 8 * 1024 * 1024); |
| |
| this.fpu = new FPU(this); |
| |
| this.devices.ps2 = new PS2(this, device_bus); |
| |
| this.devices.uart = new UART(this, 0x3F8, device_bus); |
| |
| this.devices.fdc = new FloppyController(this, settings.fda, settings.fdb); |
| |
| var ide_device_count = 0; |
| |
| if(settings.hda) |
| { |
| this.devices.hda = new IDEDevice(this, settings.hda, false, ide_device_count++, device_bus); |
| } |
| |
| if(settings.cdrom) |
| { |
| this.devices.cdrom = new IDEDevice(this, settings.cdrom, true, ide_device_count++, device_bus); |
| } |
| |
| if(settings.hdb) |
| { |
| this.devices.hdb = new IDEDevice(this, settings.hdb, false, ide_device_count++, device_bus); |
| } |
| |
| this.devices.pit = new PIT(this, device_bus); |
| |
| if(settings.enable_ne2k) |
| { |
| this.devices.net = new Ne2k(this, device_bus); |
| } |
| |
| if(settings.fs9p) |
| { |
| this.devices.virtio = new VirtIO(this, device_bus, settings.fs9p); |
| } |
| |
| if(true) |
| { |
| this.devices.sb16 = new SB16(this, device_bus); |
| } |
| } |
| |
| if(settings.multiboot) |
| { |
| dbg_assert(settings.multiboot.buffer); |
| this.load_multiboot(settings.multiboot.buffer); |
| } |
| |
| if(DEBUG) |
| { |
| this.debug.init(); |
| } |
| }; |
| |
| CPU.prototype.load_multiboot = function(buffer) |
| { |
| // https://www.gnu.org/software/grub/manual/multiboot/multiboot.html |
| |
| dbg_log("Trying multiboot from buffer of size " + buffer.byteLength, LOG_CPU); |
| |
| const MAGIC = 0x1BADB002; |
| const ELF_MAGIC = 0x464C457F; |
| const MULTIBOOT_HEADER_ADDRESS = 0x10000; |
| const MULTIBOOT_SEARCH_BYTES = 8192; |
| |
| if(buffer.byteLength < MULTIBOOT_SEARCH_BYTES) |
| { |
| var buf32 = new Int32Array(MULTIBOOT_SEARCH_BYTES / 4); |
| new Uint8Array(buf32.buffer).set(new Uint8Array(buffer)); |
| } |
| else |
| { |
| var buf32 = new Int32Array(buffer, 0, MULTIBOOT_SEARCH_BYTES / 4); |
| } |
| |
| for(var offset = 0; offset < MULTIBOOT_SEARCH_BYTES; offset += 4) |
| { |
| if(buf32[offset >> 2] === MAGIC) |
| { |
| var flags = buf32[offset + 4 >> 2]; |
| var checksum = buf32[offset + 8 >> 2]; |
| var total = MAGIC + flags + checksum | 0; |
| |
| if(total) |
| { |
| dbg_log("Multiboot checksum check failed", LOG_CPU); |
| continue; |
| } |
| } |
| else |
| { |
| continue; |
| } |
| |
| dbg_log("Multiboot magic found, flags: " + h(flags >>> 0, 8), LOG_CPU); |
| dbg_assert((flags & ~MULTIBOOT_HEADER_ADDRESS) === 0, "TODO"); |
| |
| this.reg32s[reg_eax] = 0x2BADB002; |
| |
| let multiboot_info_addr = 0x7C00; |
| this.reg32s[reg_ebx] = multiboot_info_addr; |
| this.write32(multiboot_info_addr, 0); |
| |
| this.cr[0] = 1; |
| this.protected_mode = true; |
| this.flags = flags_default; |
| this.update_cs_size(true); |
| this.stack_size_32 = true; |
| |
| for(var i = 0; i < 6; i++) |
| { |
| this.segment_is_null[i] = 0; |
| this.segment_offsets[i] = 0; |
| this.segment_limits[i] = 0xFFFFFFFF; |
| |
| // Value doesn't matter, OS isn't allowed to reload without setting |
| // up a proper GDT |
| this.sreg[i] = 0xB002; |
| } |
| |
| if(flags & MULTIBOOT_HEADER_ADDRESS) |
| { |
| dbg_log("Multiboot specifies its own address table", LOG_CPU); |
| |
| var header_addr = buf32[offset + 12 >> 2]; |
| var load_addr = buf32[offset + 16 >> 2]; |
| var load_end_addr = buf32[offset + 20 >> 2]; |
| var bss_end_addr = buf32[offset + 24 >> 2]; |
| var entry_addr = buf32[offset + 28 >> 2]; |
| |
| dbg_log("header=" + h(header_addr, 8) + |
| " load=" + h(load_addr, 8) + |
| " load_end=" + h(load_end_addr, 8) + |
| " bss_end=" + h(bss_end_addr, 8) + |
| " entry=" + h(entry_addr, 8)); |
| |
| dbg_assert(load_addr <= header_addr); |
| |
| var file_start = offset - (header_addr - load_addr); |
| |
| if(load_end_addr === 0) |
| { |
| var length = undefined; |
| } |
| else |
| { |
| dbg_assert(load_end_addr >= load_addr); |
| var length = load_end_addr - load_addr; |
| } |
| |
| let blob = new Uint8Array(buffer, file_start, length); |
| this.write_blob(blob, load_addr); |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + entry_addr | 0; |
| } |
| else if(buf32[0] === ELF_MAGIC) |
| { |
| dbg_log("Multiboot image is in elf format", LOG_CPU); |
| |
| let elf = read_elf(buffer); |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + elf.header.entry | 0; |
| |
| for(let program of elf.program_headers) |
| { |
| if(program.type === 0) |
| { |
| // null |
| } |
| else if(program.type === 1) |
| { |
| // load |
| |
| // Since multiboot specifies that paging is disabled, |
| // virtual and physical address must be equal |
| dbg_assert(program.paddr === program.vaddr); |
| dbg_assert(program.filesz <= program.memsz); |
| |
| let blob = new Uint8Array(buffer, program.offset, program.filesz); |
| this.write_blob(blob, program.paddr); |
| } |
| else if(program.type === 4 || |
| program.type === 0x6474e550 || |
| program.type === 0x6474e551) |
| { |
| // ignore for now |
| } |
| else |
| { |
| dbg_assert(false, "unimplemented elf section type"); |
| } |
| } |
| } |
| else |
| { |
| dbg_assert(false, "Not a bootable multiboot format"); |
| } |
| |
| // only for kvm-unit-test |
| this.io.register_write_consecutive(0xF4, this, |
| function(value) |
| { |
| console.log("Test exited with code " + h(value, 2)); |
| throw "HALT"; |
| }, |
| function() {}, |
| function() {}, |
| function() {}); |
| |
| // only for kvm-unit-test |
| for(let i = 0xE; i <= 0xF; i++) |
| { |
| this.io.register_write(0x2000 + i, this, |
| function(value) |
| { |
| dbg_log("kvm-unit-test: Set irq " + h(i) + " to " + h(value, 2)); |
| if(value) |
| { |
| this.device_raise_irq(i); |
| } |
| else |
| { |
| this.device_lower_irq(i); |
| } |
| }); |
| } |
| |
| dbg_log("Starting multiboot kernel at:", LOG_CPU); |
| this.debug.dump_state(); |
| this.debug.dump_regs(); |
| |
| break; |
| } |
| }; |
| |
| CPU.prototype.fill_cmos = function(rtc, settings) |
| { |
| var boot_order = settings.boot_order || 0x213; |
| |
| // Used by seabios to determine the boot order |
| // Nibble |
| // 1: FloppyPrio |
| // 2: HDPrio |
| // 3: CDPrio |
| // 4: BEVPrio |
| // bootflag 1, high nibble, lowest priority |
| // Low nibble: Disable floppy signature check (1) |
| rtc.cmos_write(CMOS_BIOS_BOOTFLAG1 , 1 | boot_order >> 4 & 0xF0); |
| |
| // bootflag 2, both nibbles, high and middle priority |
| rtc.cmos_write(CMOS_BIOS_BOOTFLAG2, boot_order & 0xFF); |
| |
| // 640k or less if less memory is used |
| rtc.cmos_write(CMOS_MEM_BASE_LOW, 640 & 0xFF); |
| rtc.cmos_write(CMOS_MEM_BASE_HIGH, 640 >> 8); |
| |
| var memory_above_1m = 0; // in k |
| if(this.memory_size >= 1024 * 1024) |
| { |
| memory_above_1m = (this.memory_size - 1024 * 1024) >> 10; |
| memory_above_1m = Math.min(memory_above_1m, 0xFFFF); |
| } |
| |
| rtc.cmos_write(CMOS_MEM_OLD_EXT_LOW, memory_above_1m & 0xFF); |
| rtc.cmos_write(CMOS_MEM_OLD_EXT_HIGH, memory_above_1m >> 8 & 0xFF); |
| rtc.cmos_write(CMOS_MEM_EXTMEM_LOW, memory_above_1m & 0xFF); |
| rtc.cmos_write(CMOS_MEM_EXTMEM_HIGH, memory_above_1m >> 8 & 0xFF); |
| |
| var memory_above_16m = 0; // in 64k blocks |
| if(this.memory_size >= 16 * 1024 * 1024) |
| { |
| memory_above_16m = (this.memory_size - 16 * 1024 * 1024) >> 16; |
| memory_above_16m = Math.min(memory_above_16m, 0xFFFF); |
| } |
| rtc.cmos_write(CMOS_MEM_EXTMEM2_LOW, memory_above_16m & 0xFF); |
| rtc.cmos_write(CMOS_MEM_EXTMEM2_HIGH, memory_above_16m >> 8 & 0xFF); |
| |
| // memory above 4G (not supported by this emulator) |
| rtc.cmos_write(CMOS_MEM_HIGHMEM_LOW, 0); |
| rtc.cmos_write(CMOS_MEM_HIGHMEM_MID, 0); |
| rtc.cmos_write(CMOS_MEM_HIGHMEM_HIGH, 0); |
| |
| rtc.cmos_write(CMOS_EQUIPMENT_INFO, 0x2F); |
| |
| rtc.cmos_write(CMOS_BIOS_SMP_COUNT, 0); |
| |
| // Used by bochs BIOS to skip the boot menu delay. |
| if (settings.fastboot) rtc.cmos_write(0x3f, 0x01); |
| }; |
| |
| CPU.prototype.load_bios = function() |
| { |
| var bios = this.bios.main; |
| var vga_bios = this.bios.vga; |
| |
| if(!bios) |
| { |
| dbg_log("Warning: No BIOS"); |
| return; |
| } |
| |
| // load bios |
| var data = new Uint8Array(bios), |
| start = 0x100000 - bios.byteLength; |
| |
| this.write_blob(data, start); |
| |
| if(vga_bios) |
| { |
| // load vga bios |
| var vga_bios8 = new Uint8Array(vga_bios); |
| |
| // older versions of seabios |
| this.write_blob(vga_bios8, 0xC0000); |
| |
| // newer versions of seabios (needs to match pci rom address, see vga.js) |
| this.io.mmap_register(0xFEB00000, 0x100000, |
| function(addr) |
| { |
| addr = (addr - 0xFEB00000) | 0; |
| if(addr < vga_bios8.length) |
| { |
| return vga_bios8[addr]; |
| } |
| else |
| { |
| return 0; |
| } |
| }, |
| function(addr, value) |
| { |
| dbg_assert(false, "Unexpected write to VGA rom"); |
| }); |
| } |
| else |
| { |
| dbg_log("Warning: No VGA BIOS"); |
| } |
| |
| // seabios expects the bios to be mapped to 0xFFF00000 also |
| this.io.mmap_register(0xFFF00000, 0x100000, |
| function(addr) |
| { |
| addr &= 0xFFFFF; |
| return this.mem8[addr]; |
| }.bind(this), |
| function(addr, value) |
| { |
| addr &= 0xFFFFF; |
| this.mem8[addr] = value; |
| }.bind(this)); |
| }; |
| |
| CPU.prototype.do_run = function() |
| { |
| /** @type {number} */ |
| var start = v86.microtick(); |
| |
| /** @type {number} */ |
| var now = start; |
| |
| // outer loop: |
| // runs cycles + timers |
| for(; now - start < TIME_PER_FRAME;) |
| { |
| this.run_hardware_timers(now); |
| this.handle_irqs(); |
| |
| this.do_many_cycles(); |
| |
| if(this.in_hlt) |
| { |
| return; |
| } |
| |
| now = v86.microtick(); |
| } |
| }; |
| |
| CPU.prototype.do_many_cycles = function() |
| { |
| try { |
| this.do_many_cycles_unsafe(); |
| } |
| catch(e) |
| { |
| this.exception_cleanup(e); |
| } |
| }; |
| |
| CPU.prototype.do_many_cycles_unsafe = function() |
| { |
| // inner loop: |
| // runs only cycles |
| for(var k = LOOP_COUNTER; k--;) |
| { |
| this.cycle_internal(); |
| } |
| }; |
| |
| // Some functions must not be inlined, because then more code is in the |
| // deoptimized try-catch block. |
| // This trick is a bit ugly, but it works without further complication. |
| if(typeof window !== "undefined") |
| { |
| window["__no_inline_for_closure_compiler__"] = [ |
| CPU.prototype.exception_cleanup, |
| CPU.prototype.do_many_cycles_unsafe, |
| CPU.prototype.do_many_cycles, |
| ]; |
| } |
| |
| /** @const */ |
| var PROFILING = false; |
| |
| if(PROFILING) |
| { |
| var instruction_total = new Float64Array(256); |
| var instruction_count = new Float64Array(256); |
| |
| window["print_profiling"] = function print_profiling() |
| { |
| var prof_instructions = []; |
| for(var i = 0; i < 256; i++) prof_instructions[i] = { |
| n: h(i, 2), |
| total: instruction_total[i], |
| count: instruction_count[i], |
| per: (instruction_total[i] / instruction_count[i]) || 0, |
| }; |
| |
| console.log("count:"); |
| console.table(prof_instructions.sort((p0, p1) => p1.count - p0.count)); |
| |
| console.log("time:"); |
| console.table(prof_instructions.sort((p0, p1) => p1.total - p0.total)); |
| |
| console.log("time/count:"); |
| console.table(prof_instructions.sort((p0, p1) => p1.per - p0.per)); |
| }; |
| } |
| |
| /** |
| * execute a single instruction cycle on the cpu |
| * this includes reading all prefixes and the whole instruction |
| */ |
| CPU.prototype.cycle_internal = function() |
| { |
| this.previous_ip = this.instruction_pointer; |
| |
| this.timestamp_counter++; |
| |
| if(PROFILING) |
| { |
| var start = performance.now(); |
| } |
| |
| var opcode = this.read_imm8(); |
| //this.translate_address_read(this.instruction_pointer + 15|0) |
| |
| if(DEBUG) |
| { |
| this.debug.logop(this.instruction_pointer - 1 >>> 0, opcode); |
| } |
| |
| // call the instruction |
| this.table[opcode](this); |
| |
| if(PROFILING) |
| { |
| var end = performance.now(); |
| instruction_total[opcode] += end - start; |
| instruction_count[opcode]++; |
| } |
| |
| if(this.flags & flag_trap) |
| { |
| // TODO |
| dbg_log("Trap flag: Ignored", LOG_CPU); |
| } |
| }; |
| |
| /** @export */ |
| CPU.prototype.cycle = function() |
| { |
| try |
| { |
| this.cycle_internal(); |
| } |
| catch(e) |
| { |
| this.exception_cleanup(e); |
| } |
| }; |
| |
| CPU.prototype.segment_prefix_op = function(sreg) |
| { |
| dbg_assert(sreg <= 5); |
| this.prefixes |= sreg + 1; |
| this.run_prefix_instruction(); |
| this.prefixes = 0; |
| }; |
| |
| CPU.prototype.run_prefix_instruction = function() |
| { |
| if(this.is_osize_32()) |
| { |
| this.table32[this.read_imm8()](this); |
| } |
| else |
| { |
| this.table16[this.read_imm8()](this); |
| } |
| }; |
| |
| CPU.prototype.hlt_loop = function() |
| { |
| dbg_assert(this.flags & flag_interrupt); |
| //dbg_log("In HLT loop", LOG_CPU); |
| |
| this.run_hardware_timers(v86.microtick()); |
| this.handle_irqs(); |
| |
| return 0; |
| }; |
| |
| CPU.prototype.run_hardware_timers = function(now) |
| { |
| if(ENABLE_HPET) |
| { |
| var pit_time = this.devices.pit.timer(now, this.devices.hpet.legacy_mode); |
| var rtc_time = this.devices.rtc.timer(now, this.devices.hpet.legacy_mode); |
| this.devices.hpet.timer(now); |
| } |
| else |
| { |
| var pit_time = this.devices.pit.timer(now, false); |
| var rtc_time = this.devices.rtc.timer(now, false); |
| } |
| |
| if(ENABLE_ACPI) |
| { |
| this.devices.acpi.timer(now); |
| this.devices.apic.timer(now); |
| } |
| }; |
| |
| CPU.prototype.clear_prefixes = function() |
| { |
| this.prefixes = 0; |
| }; |
| |
| CPU.prototype.set_cr0 = function(cr0) |
| { |
| //dbg_log("cr0 = " + h(this.cr[0] >>> 0), LOG_CPU); |
| |
| if((cr0 & (CR0_PE | CR0_PG)) === CR0_PG) |
| { |
| // cannot load PG without PE |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| this.cr[0] = cr0; |
| |
| if(!this.fpu) |
| { |
| // if there's no FPU, keep emulation set |
| this.cr[0] |= CR0_EM; |
| } |
| this.cr[0] |= CR0_ET; |
| |
| var new_paging = (this.cr[0] & CR0_PG) === CR0_PG; |
| |
| dbg_assert(typeof this.paging === "boolean"); |
| if(new_paging !== this.paging) |
| { |
| this.paging = new_paging; |
| this.full_clear_tlb(); |
| } |
| |
| this.protected_mode = (this.cr[0] & CR0_PE) === CR0_PE; |
| }; |
| |
| CPU.prototype.set_cr4 = function(cr4) |
| { |
| if(cr4 & (1 << 11 | 1 << 12 | 1 << 15 | 1 << 16 | 1 << 19 | 0xFFC00000)) |
| { |
| this.trigger_gp(0); |
| } |
| |
| if((this.cr[4] ^ cr4) & CR4_PGE) |
| { |
| if(cr4 & CR4_PGE) |
| { |
| // The PGE bit has been enabled. The global TLB is |
| // still empty, so we only have to copy it over |
| this.clear_tlb(); |
| } |
| else |
| { |
| // Clear the global TLB |
| this.full_clear_tlb(); |
| } |
| } |
| |
| this.cr[4] = cr4; |
| this.page_size_extensions = (cr4 & CR4_PSE) ? PSE_ENABLED : 0; |
| |
| if(cr4 & CR4_PAE) |
| { |
| throw this.debug.unimpl("PAE"); |
| } |
| |
| if(cr4 & 0xFFFFF900) |
| { |
| dbg_assert(false, "Unimplemented CR4 bits: " + h(cr4)); |
| this.trigger_ud(); |
| } |
| |
| dbg_log("cr4=" + h(cr4 >>> 0), LOG_CPU); |
| }; |
| |
| CPU.prototype.cpl_changed = function() |
| { |
| this.last_virt_eip = -1; |
| this.last_virt_esp = -1; |
| }; |
| |
| CPU.prototype.read_imm8 = function() |
| { |
| if((this.instruction_pointer & ~0xFFF) ^ this.last_virt_eip) |
| { |
| this.eip_phys = this.translate_address_read(this.instruction_pointer) ^ this.instruction_pointer; |
| this.last_virt_eip = this.instruction_pointer & ~0xFFF; |
| } |
| |
| var data8 = this.read8(this.eip_phys ^ this.instruction_pointer); |
| this.instruction_pointer = this.instruction_pointer + 1 | 0; |
| |
| return data8; |
| }; |
| |
| CPU.prototype.read_imm8s = function() |
| { |
| return this.read_imm8() << 24 >> 24; |
| }; |
| |
| CPU.prototype.read_imm16 = function() |
| { |
| // Two checks in one comparison: |
| // 1. Did the high 20 bits of eip change |
| // or 2. Are the low 12 bits of eip 0xFFF (and this read crosses a page boundary) |
| if(((this.instruction_pointer ^ this.last_virt_eip) >>> 0) > 0xFFE) |
| { |
| return this.read_imm8() | this.read_imm8() << 8; |
| } |
| |
| var data16 = this.read16(this.eip_phys ^ this.instruction_pointer); |
| this.instruction_pointer = this.instruction_pointer + 2 | 0; |
| |
| return data16; |
| }; |
| |
| CPU.prototype.read_imm32s = function() |
| { |
| // Analogue to the above comment |
| if(((this.instruction_pointer ^ this.last_virt_eip) >>> 0) > 0xFFC) |
| { |
| return this.read_imm16() | this.read_imm16() << 16; |
| } |
| |
| var data32 = this.read32s(this.eip_phys ^ this.instruction_pointer); |
| this.instruction_pointer = this.instruction_pointer + 4 | 0; |
| |
| return data32; |
| }; |
| |
| /* |
| * Create an internal data unit to represent 64 bits of data |
| */ |
| CPU.prototype.create_atom64s = function(low, high) |
| { |
| let data = new Int32Array(2); |
| data[0] = low; |
| data[1] = high; |
| return data; |
| }; |
| |
| CPU.prototype.create_atom128s = function(d0, d1, d2, d3) |
| { |
| let data = new Int32Array(4); |
| data[0] = d0; |
| data[1] = d1; |
| data[2] = d2; |
| data[3] = d3; |
| return data; |
| } |
| |
| CPU.prototype.read_modrm_byte = function() |
| { |
| this.modrm_byte = this.read_imm8(); |
| }; |
| |
| CPU.prototype.read_op0F = CPU.prototype.read_imm8; |
| CPU.prototype.read_sib = CPU.prototype.read_imm8; |
| CPU.prototype.read_op8 = CPU.prototype.read_imm8; |
| CPU.prototype.read_op8s = CPU.prototype.read_imm8s; |
| CPU.prototype.read_op16 = CPU.prototype.read_imm16; |
| CPU.prototype.read_op32s = CPU.prototype.read_imm32s; |
| CPU.prototype.read_disp8 = CPU.prototype.read_imm8; |
| CPU.prototype.read_disp8s = CPU.prototype.read_imm8s; |
| CPU.prototype.read_disp16 = CPU.prototype.read_imm16; |
| CPU.prototype.read_disp32s = CPU.prototype.read_imm32s; |
| |
| CPU.prototype.init2 = function () {}; |
| CPU.prototype.branch_taken = function () {}; |
| CPU.prototype.branch_not_taken = function () {}; |
| CPU.prototype.diverged = function () {}; |
| |
| CPU.prototype.modrm_resolve = function(modrm_byte) |
| { |
| dbg_assert(modrm_byte < 0xC0); |
| |
| return (this.is_asize_32() ? this.modrm_table32 : this.modrm_table16)[modrm_byte](this); |
| }; |
| |
| CPU.prototype.sib_resolve = function(mod) |
| { |
| return this.sib_table[this.read_sib()](this, mod); |
| }; |
| |
| CPU.prototype.clear_instruction_cache = function() {}; |
| |
| // read word from a page boundary, given 2 physical addresses |
| CPU.prototype.virt_boundary_read16 = function(low, high) |
| { |
| dbg_assert((low & 0xFFF) === 0xFFF); |
| dbg_assert((high & 0xFFF) === 0); |
| |
| return this.read8(low) | this.read8(high) << 8; |
| }; |
| |
| // read doubleword from a page boundary, given 2 addresses |
| CPU.prototype.virt_boundary_read32s = function(low, high) |
| { |
| dbg_assert((low & 0xFFF) >= 0xFFD); |
| dbg_assert((high - 3 & 0xFFF) === (low & 0xFFF)); |
| |
| var mid; |
| |
| if(low & 1) |
| { |
| if(low & 2) |
| { |
| // 0xFFF |
| mid = this.read_aligned16(high - 2 >> 1); |
| } |
| else |
| { |
| // 0xFFD |
| mid = this.read_aligned16(low + 1 >> 1); |
| } |
| } |
| else |
| { |
| // 0xFFE |
| mid = this.virt_boundary_read16(low + 1 | 0, high - 1 | 0); |
| } |
| |
| return this.read8(low) | mid << 8 | this.read8(high) << 24; |
| }; |
| |
| CPU.prototype.virt_boundary_write16 = function(low, high, value) |
| { |
| dbg_assert((low & 0xFFF) === 0xFFF); |
| dbg_assert((high & 0xFFF) === 0); |
| |
| this.write8(low, value); |
| this.write8(high, value >> 8); |
| }; |
| |
| CPU.prototype.virt_boundary_write32 = function(low, high, value) |
| { |
| dbg_assert((low & 0xFFF) >= 0xFFD); |
| dbg_assert((high - 3 & 0xFFF) === (low & 0xFFF)); |
| |
| this.write8(low, value); |
| this.write8(high, value >> 24); |
| |
| if(low & 1) |
| { |
| if(low & 2) |
| { |
| // 0xFFF |
| this.write8(high - 2, value >> 8); |
| this.write8(high - 1, value >> 16); |
| } |
| else |
| { |
| // 0xFFD |
| this.write8(low + 1 | 0, value >> 8); |
| this.write8(low + 2 | 0, value >> 16); |
| } |
| } |
| else |
| { |
| // 0xFFE |
| this.write8(low + 1 | 0, value >> 8); |
| this.write8(high - 1, value >> 16); |
| } |
| }; |
| |
| // safe_read, safe_write |
| // read or write byte, word or dword to the given *virtual* address, |
| // and be safe on page boundaries |
| |
| CPU.prototype.safe_read8 = function(addr) |
| { |
| dbg_assert(addr < 0x80000000); |
| return this.read8(this.translate_address_read(addr)); |
| }; |
| |
| CPU.prototype.safe_read16 = function(addr) |
| { |
| if(this.paging && (addr & 0xFFF) === 0xFFF) |
| { |
| return this.safe_read8(addr) | this.safe_read8(addr + 1 | 0) << 8; |
| } |
| else |
| { |
| return this.read16(this.translate_address_read(addr)); |
| } |
| }; |
| |
| CPU.prototype.safe_read32s = function(addr) |
| { |
| if(this.paging && (addr & 0xFFF) >= 0xFFD) |
| { |
| return this.safe_read16(addr) | this.safe_read16(addr + 2 | 0) << 16; |
| } |
| else |
| { |
| return this.read32s(this.translate_address_read(addr)); |
| } |
| }; |
| |
| CPU.prototype.safe_read64s = function(addr) |
| { |
| let data = this.create_atom64s(0, 0); |
| if(this.paging && (addr & 0xFFF) >= 0xFF9) |
| { |
| data[0] = this.safe_read32s(addr); |
| data[1] = this.safe_read32s(addr + 4 | 0); |
| } |
| else |
| { |
| data[0] = this.read32s(this.translate_address_read(addr)); |
| data[1] = this.read32s(this.translate_address_read(addr + 4 | 0)); |
| } |
| return data; |
| }; |
| |
| CPU.prototype.safe_read128s_aligned = function(addr) |
| { |
| dbg_assert((addr & 0xF) === 0); |
| let phys = this.translate_address_read(addr); |
| return this.create_atom128s( |
| this.read32s(phys), |
| this.read32s(phys + 4 | 0), |
| this.read32s(phys + 8 | 0), |
| this.read32s(phys + 12 | 0) |
| ); |
| }; |
| |
| CPU.prototype.safe_read128s_unaligned = function(addr) |
| { |
| return this.create_atom128s( |
| this.safe_read32s(addr), |
| this.safe_read32s(addr + 4 | 0), |
| this.safe_read32s(addr + 8 | 0), |
| this.safe_read32s(addr + 12 | 0) |
| ); |
| }; |
| |
| CPU.prototype.safe_write8 = function(addr, value) |
| { |
| dbg_assert(addr < 0x80000000); |
| this.write8(this.translate_address_write(addr), value); |
| }; |
| |
| CPU.prototype.safe_write16 = function(addr, value) |
| { |
| var phys_low = this.translate_address_write(addr); |
| |
| if((addr & 0xFFF) === 0xFFF) |
| { |
| this.virt_boundary_write16(phys_low, this.translate_address_write(addr + 1 | 0), value); |
| } |
| else |
| { |
| this.write16(phys_low, value); |
| } |
| }; |
| |
| CPU.prototype.safe_write32 = function(addr, value) |
| { |
| var phys_low = this.translate_address_write(addr); |
| |
| if((addr & 0xFFF) >= 0xFFD) |
| { |
| // XXX |
| this.virt_boundary_write32(phys_low, this.translate_address_write(addr + 3 & ~3) | (addr + 3) & 3, value); |
| } |
| else |
| { |
| this.write32(phys_low, value); |
| } |
| }; |
| |
| CPU.prototype.safe_write64 = function(addr, low, high) |
| { |
| this.writable_or_pagefault(addr, 8); |
| this.safe_write32(addr, low); |
| this.safe_write32(addr + 4 | 0, high); |
| }; |
| |
| CPU.prototype.safe_write128 = function(addr, d0, d1, d2, d3) |
| { |
| this.writable_or_pagefault(addr, 16); |
| this.safe_write32(addr, d0); |
| this.safe_write32(addr + 4 | 0, d1); |
| this.safe_write32(addr + 8 | 0, d2); |
| this.safe_write32(addr + 12 | 0, d3); |
| }; |
| |
| |
| // read 2 or 4 byte from ip, depending on address size attribute |
| CPU.prototype.read_moffs = function() |
| { |
| if(this.is_asize_32()) |
| { |
| return this.get_seg_prefix(reg_ds) + this.read_op32s() | 0; |
| } |
| else |
| { |
| return this.get_seg_prefix(reg_ds) + this.read_op16() | 0; |
| } |
| }; |
| |
| CPU.prototype.getiopl = function() |
| { |
| return this.flags >> 12 & 3; |
| }; |
| |
| CPU.prototype.vm86_mode = function() |
| { |
| return !!(this.flags & flag_vm); |
| }; |
| |
| CPU.prototype.get_eflags = function() |
| { |
| return (this.flags & ~flags_all) | !!this.getcf() | !!this.getpf() << 2 | !!this.getaf() << 4 | |
| !!this.getzf() << 6 | !!this.getsf() << 7 | !!this.getof() << 11; |
| }; |
| |
| /** |
| * Update the flags register depending on iopl and cpl |
| */ |
| CPU.prototype.update_eflags = function(new_flags) |
| { |
| var dont_update = flag_rf | flag_vm | flag_vip | flag_vif, |
| clear = ~flag_vip & ~flag_vif & flags_mask; |
| |
| if(this.flags & flag_vm) |
| { |
| // other case needs to be handled in popf or iret |
| dbg_assert(this.getiopl() === 3); |
| |
| dont_update |= flag_iopl; |
| |
| // don't clear vip or vif |
| clear |= flag_vip | flag_vif; |
| } |
| else |
| { |
| if(!this.protected_mode) dbg_assert(this.cpl === 0); |
| |
| if(this.cpl) |
| { |
| // cpl > 0 |
| // cannot update iopl |
| dont_update |= flag_iopl; |
| |
| if(this.cpl > this.getiopl()) |
| { |
| // cpl > iopl |
| // cannot update interrupt flag |
| dont_update |= flag_interrupt; |
| } |
| } |
| } |
| |
| this.flags = (new_flags ^ ((this.flags ^ new_flags) & dont_update)) & clear | flags_default; |
| |
| this.flags_changed = 0; |
| }; |
| |
| CPU.prototype.get_stack_reg = function() |
| { |
| if(this.stack_size_32) |
| { |
| return this.reg32s[reg_esp]; |
| } |
| else |
| { |
| return this.reg16[reg_sp]; |
| } |
| }; |
| |
| CPU.prototype.set_stack_reg = function(value) |
| { |
| if(this.stack_size_32) |
| { |
| this.reg32s[reg_esp] = value; |
| } |
| else |
| { |
| this.reg16[reg_sp] = value; |
| } |
| }; |
| |
| CPU.prototype.adjust_stack_reg = function(value) |
| { |
| if(this.stack_size_32) |
| { |
| this.reg32s[reg_esp] += value; |
| } |
| else |
| { |
| this.reg16[reg_sp] += value; |
| } |
| }; |
| |
| CPU.prototype.get_stack_pointer = function(mod) |
| { |
| if(this.stack_size_32) |
| { |
| return this.get_seg(reg_ss) + this.reg32s[reg_esp] + mod | 0; |
| } |
| else |
| { |
| return this.get_seg(reg_ss) + (this.reg16[reg_sp] + mod & 0xFFFF) | 0; |
| } |
| }; |
| |
| /* |
| * returns the "real" instruction pointer, |
| * without segment offset |
| */ |
| CPU.prototype.get_real_eip = function() |
| { |
| return this.instruction_pointer - this.get_seg(reg_cs) | 0; |
| }; |
| |
| CPU.prototype.call_interrupt_vector = function(interrupt_nr, is_software_int, error_code) |
| { |
| //dbg_log("int " + h(interrupt_nr, 2) + " (" + (is_software_int ? "soft" : "hard") + "ware)", LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("int " + h(interrupt_nr) + " start" + |
| " (" + (is_software_int ? "soft" : "hard") + "ware)"); |
| CPU_LOG_VERBOSE && this.debug.dump_regs(); |
| |
| this.debug.debug_interrupt(interrupt_nr); |
| |
| dbg_assert(error_code === false || typeof error_code === "number"); |
| |
| // we have to leave hlt_loop at some point, this is a |
| // good place to do it |
| //this.in_hlt && dbg_log("Leave HLT loop", LOG_CPU); |
| this.in_hlt = false; |
| |
| if(this.protected_mode) |
| { |
| if(this.vm86_mode() && (this.cr[4] & CR4_VME)) |
| { |
| throw this.debug.unimpl("VME"); |
| } |
| |
| if(this.vm86_mode() && is_software_int && this.getiopl() < 3) |
| { |
| dbg_log("call_interrupt_vector #GP. vm86 && software int && iopl < 3", LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if((interrupt_nr << 3 | 7) > this.idtr_size) |
| { |
| dbg_log(interrupt_nr, LOG_CPU); |
| dbg_trace(LOG_CPU); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| var addr = this.idtr_offset + (interrupt_nr << 3) | 0; |
| dbg_assert((addr & 0xFFF) < 0xFF8); |
| |
| if(this.paging) |
| { |
| addr = this.translate_address_system_read(addr); |
| } |
| |
| var base = this.read16(addr) | this.read16(addr + 6 | 0) << 16; |
| var selector = this.read16(addr + 2 | 0); |
| var access = this.read8(addr + 5 | 0); |
| var dpl = access >> 5 & 3; |
| var type = access & 31; |
| |
| if((access & 0x80) === 0) |
| { |
| // present bit not set |
| throw this.debug.unimpl("#NP handler"); |
| } |
| |
| if(is_software_int && dpl < this.cpl) |
| { |
| dbg_log("#gp software interrupt (" + h(interrupt_nr, 2) + ") and dpl < cpl", LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(interrupt_nr << 3 | 2); |
| } |
| |
| if(type === 5) |
| { |
| // task gate |
| dbg_log("interrupt to task gate: int=" + h(interrupt_nr, 2) + " sel=" + h(selector, 4) + " dpl=" + dpl, LOG_CPU); |
| dbg_trace(LOG_CPU); |
| |
| this.do_task_switch(selector, error_code); |
| CPU_LOG_VERBOSE && this.debug.dump_state("int end"); |
| return; |
| } |
| |
| if((type & ~1 & ~8) !== 6) |
| { |
| // invalid type |
| dbg_trace(LOG_CPU); |
| dbg_log("invalid type: " + h(type)); |
| dbg_log(h(addr) + " " + h(base >>> 0) + " " + h(selector)); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| var is_trap = (type & 1) === 1; |
| var is_16 = (type & 8) === 0; |
| |
| var info = this.lookup_segment_selector(selector); |
| |
| dbg_assert((base >>> 0) <= info.effective_limit); |
| dbg_assert(info.is_valid); |
| |
| if(info.is_null) |
| { |
| dbg_log("is null"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| if(!info.is_executable || info.dpl > this.cpl) |
| { |
| dbg_log("not exec"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| if(!info.is_present) |
| { |
| // kvm-unit-test |
| dbg_log("not present"); |
| this.trigger_np(interrupt_nr << 3 | 2); |
| } |
| |
| var old_flags = this.get_eflags(); |
| |
| //dbg_log("interrupt " + h(interrupt_nr, 2) + " (" + (is_software_int ? "soft" : "hard") + "ware) from cpl=" + this.cpl + " vm=" + (this.flags & flag_vm) + " cs:eip=" + h(this.sreg[reg_cs], 4) + ":" + h(this.get_real_eip(), 8) + " to cpl=" |
| |
| if(!info.dc_bit && info.dpl < this.cpl) |
| { |
| // inter privilege level interrupt |
| // interrupt from vm86 mode |
| |
| //dbg_log("Inter privilege interrupt gate=" + h(selector, 4) + ":" + h(base >>> 0, 8) + " trap=" + is_trap + " 16bit=" + is_16, LOG_CPU); |
| //this.debug.dump_regs(); |
| var tss_stack_addr = this.get_tss_stack_addr(info.dpl); |
| |
| if(this.tss_size_32) |
| { |
| var new_esp = this.read32s(tss_stack_addr); |
| var new_ss = this.read16(tss_stack_addr + 4 | 0); |
| } |
| else |
| { |
| var new_esp = this.read16(tss_stack_addr); |
| var new_ss = this.read16(tss_stack_addr + 2 | 0); |
| } |
| var ss_info = this.lookup_segment_selector(new_ss); |
| |
| // Disabled: Incorrect handling of direction bit |
| // See http://css.csail.mit.edu/6.858/2014/readings/i386/s06_03.htm |
| //if(!((new_esp >>> 0) <= ss_info.effective_limit)) |
| // debugger; |
| //dbg_assert((new_esp >>> 0) <= ss_info.effective_limit); |
| dbg_assert(ss_info.is_valid && !ss_info.is_system && ss_info.is_writable); |
| |
| if(ss_info.is_null) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(ss_info.rpl !== info.dpl) // xxx: 0 in v86 mode |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(ss_info.dpl !== info.dpl || !ss_info.rw_bit) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(!ss_info.is_present) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| var old_esp = this.reg32s[reg_esp]; |
| var old_ss = this.sreg[reg_ss]; |
| |
| if(old_flags & flag_vm) |
| { |
| //dbg_log("return from vm86 mode"); |
| //this.debug.dump_regs(); |
| dbg_assert(info.dpl === 0, "switch to non-0 dpl from vm86 mode"); |
| } |
| |
| var stack_space = (is_16 ? 2 : 4) * (5 + (error_code !== false) + 4 * ((old_flags & flag_vm) === flag_vm)); |
| var new_stack_pointer = ss_info.base + (ss_info.size ? new_esp - stack_space : (new_esp - stack_space & 0xFFFF)); |
| |
| // XXX: with new cpl or with cpl 0? |
| this.translate_address_system_write(new_stack_pointer); |
| this.translate_address_system_write(ss_info.base + new_esp - 1); |
| |
| // no exceptions below |
| |
| this.cpl = info.dpl; |
| this.cpl_changed(); |
| |
| this.update_cs_size(info.size); |
| |
| this.flags &= ~flag_vm & ~flag_rf; |
| |
| this.switch_seg(reg_ss, new_ss); |
| this.set_stack_reg(new_esp); |
| |
| if(old_flags & flag_vm) |
| { |
| if(is_16) |
| { |
| dbg_assert(false); |
| } |
| else |
| { |
| this.push32(this.sreg[reg_gs]); |
| this.push32(this.sreg[reg_fs]); |
| this.push32(this.sreg[reg_ds]); |
| this.push32(this.sreg[reg_es]); |
| } |
| } |
| |
| if(is_16) |
| { |
| this.push16(old_ss); |
| this.push16(old_esp); |
| } |
| else |
| { |
| this.push32(old_ss); |
| this.push32(old_esp); |
| } |
| } |
| else if(info.dc_bit || info.dpl === this.cpl) |
| { |
| // intra privilege level interrupt |
| |
| //dbg_log("Intra privilege interrupt gate=" + h(selector, 4) + ":" + h(base >>> 0, 8) + |
| // " trap=" + is_trap + " 16bit=" + is_16 + |
| // " cpl=" + this.cpl + " dpl=" + info.dpl + " conforming=" + +info.dc_bit, LOG_CPU); |
| //this.debug.dump_regs(); |
| |
| if(this.flags & flag_vm) |
| { |
| dbg_assert(false, "check error code"); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| var stack_space = (is_16 ? 2 : 4) * (3 + (error_code !== false)); |
| |
| // XXX: with current cpl or with cpl 0? |
| this.writable_or_pagefault(this.get_stack_pointer(-stack_space), stack_space); |
| |
| // no exceptions below |
| } |
| else |
| { |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(is_16) |
| { |
| this.push16(old_flags); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| |
| if(error_code !== false) |
| { |
| this.push16(error_code); |
| } |
| |
| base &= 0xFFFF; |
| } |
| else |
| { |
| this.push32(old_flags); |
| this.push32(this.sreg[reg_cs]); |
| this.push32(this.get_real_eip()); |
| |
| if(error_code !== false) |
| { |
| this.push32(error_code); |
| } |
| } |
| |
| if(old_flags & flag_vm) |
| { |
| this.switch_seg(reg_gs, 0); |
| this.switch_seg(reg_fs, 0); |
| this.switch_seg(reg_ds, 0); |
| this.switch_seg(reg_es, 0); |
| } |
| |
| this.sreg[reg_cs] = selector & ~3 | this.cpl; |
| dbg_assert((this.sreg[reg_cs] & 3) === this.cpl); |
| |
| this.update_cs_size(info.size); |
| |
| this.segment_limits[reg_cs] = info.effective_limit; |
| this.segment_offsets[reg_cs] = info.base; |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + base | 0; |
| |
| this.flags &= ~flag_nt & ~flag_vm & ~flag_rf & ~flag_trap; |
| |
| if(!is_trap) |
| { |
| // clear int flag for interrupt gates |
| this.flags &= ~flag_interrupt; |
| } |
| else |
| { |
| if((this.flags & flag_interrupt) && !(old_flags & flag_interrupt)) |
| { |
| if(!this.page_fault[0]) // XXX |
| { |
| this.handle_irqs(); |
| } |
| } |
| } |
| } |
| else |
| { |
| // call 4 byte cs:ip interrupt vector from ivt at cpu.memory 0 |
| |
| var index = interrupt_nr << 2; |
| var new_ip = this.read16(index); |
| var new_cs = this.read16(index + 2 | 0); |
| |
| // push flags, cs:ip |
| this.push16(this.get_eflags()); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| |
| this.flags &= ~flag_interrupt; |
| |
| this.switch_cs_real_mode(new_cs); |
| this.instruction_pointer = this.get_seg(reg_cs) + new_ip | 0; |
| } |
| |
| //dbg_log("int to:", LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("int end"); |
| }; |
| |
| CPU.prototype.iret16 = function() |
| { |
| this.iret(true); |
| }; |
| |
| CPU.prototype.iret32 = function() |
| { |
| this.iret(false); |
| }; |
| |
| CPU.prototype.iret = function(is_16) |
| { |
| //dbg_log("iret is_16=" + is_16, LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("iret" + (is_16 ? "16" : "32") + " start"); |
| //this.debug.dump_regs(); |
| |
| if(this.vm86_mode() && this.getiopl() < 3) |
| { |
| // vm86 mode, iopl != 3 |
| dbg_log("#gp iret vm86 mode, iopl != 3", LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(is_16) |
| { |
| var new_eip = this.safe_read16(this.get_stack_pointer(0)); |
| var new_cs = this.safe_read16(this.get_stack_pointer(2)); |
| var new_flags = this.safe_read16(this.get_stack_pointer(4)); |
| } |
| else |
| { |
| var new_eip = this.safe_read32s(this.get_stack_pointer(0)); |
| var new_cs = this.safe_read16(this.get_stack_pointer(4)); |
| var new_flags = this.safe_read32s(this.get_stack_pointer(8)); |
| } |
| |
| if(!this.protected_mode || (this.vm86_mode() && this.getiopl() === 3)) |
| { |
| if(new_eip & 0xFFFF0000) |
| { |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| this.switch_cs_real_mode(new_cs); |
| this.instruction_pointer = new_eip + this.get_seg(reg_cs) | 0; |
| |
| if(is_16) |
| { |
| this.update_eflags(new_flags | this.flags & ~0xFFFF); |
| this.adjust_stack_reg(3 * 2); |
| } |
| else |
| { |
| this.update_eflags(new_flags); |
| this.adjust_stack_reg(3 * 4); |
| } |
| |
| //dbg_log("iret32 to:", LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("iret end"); |
| |
| this.handle_irqs(); |
| return; |
| } |
| |
| dbg_assert(!this.vm86_mode()); |
| |
| if(this.flags & flag_nt) |
| { |
| if(DEBUG) throw this.debug.unimpl("nt"); |
| this.trigger_gp(0); |
| } |
| |
| if(new_flags & flag_vm) |
| { |
| if(this.cpl === 0) |
| { |
| // return to virtual 8086 mode |
| |
| // vm86 cannot be set in 16 bit flag |
| dbg_assert(!is_16); |
| |
| dbg_assert((new_eip & ~0xFFFF) === 0); |
| |
| //dbg_log("in vm86 mode now " + |
| // " cs:eip=" + h(new_cs, 4) + ":" + h(this.instruction_pointer >>> 0, 8) + |
| // " iopl=" + this.getiopl() + " flags=" + h(new_flags, 8), LOG_CPU); |
| |
| |
| var temp_esp = this.safe_read32s(this.get_stack_pointer(12)); |
| var temp_ss = this.safe_read16(this.get_stack_pointer(16)); |
| |
| var new_es = this.safe_read16(this.get_stack_pointer(20)); |
| var new_ds = this.safe_read16(this.get_stack_pointer(24)); |
| var new_fs = this.safe_read16(this.get_stack_pointer(28)); |
| var new_gs = this.safe_read16(this.get_stack_pointer(32)); |
| |
| // no exceptions below |
| |
| this.update_eflags(new_flags); |
| this.flags |= flag_vm; |
| |
| this.switch_cs_real_mode(new_cs); |
| this.instruction_pointer = (new_eip & 0xFFFF) + this.get_seg(reg_cs) | 0; |
| |
| this.switch_seg(reg_es, new_es); |
| this.switch_seg(reg_ds, new_ds); |
| this.switch_seg(reg_fs, new_fs); |
| this.switch_seg(reg_gs, new_gs); |
| |
| this.adjust_stack_reg(9 * 4); // 9 dwords: eip, cs, flags, esp, ss, es, ds, fs, gs |
| |
| this.reg32s[reg_esp] = temp_esp; |
| this.switch_seg(reg_ss, temp_ss); |
| |
| this.cpl = 3; |
| this.cpl_changed(); |
| |
| this.update_cs_size(false); |
| |
| //dbg_log("iret32 to:", LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("iret end"); |
| //this.debug.dump_regs(); |
| |
| return; |
| } |
| else |
| { |
| dbg_log("vm86 flag ignored because cpl != 0", LOG_CPU); |
| new_flags &= ~flag_vm; |
| } |
| } |
| |
| // protected mode return |
| |
| var info = this.lookup_segment_selector(new_cs); |
| |
| dbg_assert(info.is_valid); |
| dbg_assert((new_eip >>> 0) <= info.effective_limit); |
| |
| if(info.is_null) |
| { |
| throw this.debug.unimpl("is null"); |
| } |
| if(!info.is_present) |
| { |
| throw this.debug.unimpl("not present"); |
| } |
| if(!info.is_executable) |
| { |
| throw this.debug.unimpl("not exec"); |
| } |
| if(info.rpl < this.cpl) |
| { |
| throw this.debug.unimpl("rpl < cpl"); |
| } |
| if(info.dc_bit && info.dpl > info.rpl) |
| { |
| throw this.debug.unimpl("conforming and dpl > rpl"); |
| } |
| |
| if(!info.dc_bit && info.rpl !== info.dpl) |
| { |
| dbg_log("#gp iret: non-conforming cs and rpl != dpl, dpl=" + info.dpl + " rpl=" + info.rpl, LOG_CPU); |
| this.trigger_gp(new_cs & ~3); |
| } |
| |
| if(info.rpl > this.cpl) |
| { |
| // outer privilege return |
| if(is_16) |
| { |
| var temp_esp = this.safe_read16(this.get_stack_pointer(6)); |
| var temp_ss = this.safe_read16(this.get_stack_pointer(8)); |
| } |
| else |
| { |
| var temp_esp = this.safe_read32s(this.get_stack_pointer(12)); |
| var temp_ss = this.safe_read16(this.get_stack_pointer(16)); |
| } |
| |
| var ss_info = this.lookup_segment_selector(temp_ss); |
| var new_cpl = info.rpl; |
| |
| if(ss_info.is_null) |
| { |
| dbg_log("#GP for loading 0 in SS sel=" + h(temp_ss, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(!ss_info.is_valid || |
| ss_info.is_system || |
| ss_info.rpl !== new_cpl || |
| !ss_info.is_writable || |
| ss_info.dpl !== new_cpl) |
| { |
| dbg_log("#GP for loading invalid in SS sel=" + h(temp_ss, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(temp_ss & ~3); |
| } |
| |
| if(!ss_info.is_present) |
| { |
| dbg_log("#SS for loading non-present in SS sel=" + h(temp_ss, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_ss(temp_ss & ~3); |
| } |
| |
| // no exceptions below |
| |
| if(is_16) |
| { |
| this.update_eflags(new_flags | this.flags & ~0xFFFF); |
| } |
| else |
| { |
| this.update_eflags(new_flags); |
| } |
| |
| this.cpl = info.rpl; |
| this.cpl_changed(); |
| |
| //dbg_log("outer privilege return: from=" + this.cpl + " to=" + info.rpl + " ss:esp=" + h(temp_ss, 4) + ":" + h(temp_esp >>> 0, 8), LOG_CPU); |
| |
| this.switch_seg(reg_ss, temp_ss); |
| |
| this.set_stack_reg(temp_esp); |
| |
| if(this.cpl === 0) |
| { |
| this.flags = this.flags & ~flag_vif & ~flag_vip | (new_flags & (flag_vif | flag_vip)); |
| } |
| |
| |
| // XXX: Set segment to 0 if it's not usable in the new cpl |
| // XXX: Use cached segment information |
| //var ds_info = this.lookup_segment_selector(this.sreg[reg_ds]); |
| //if(this.cpl > ds_info.dpl && (!ds_info.is_executable || !ds_info.dc_bit)) this.switch_seg(reg_ds, 0); |
| // ... |
| } |
| else if(info.rpl === this.cpl) |
| { |
| // same privilege return |
| // no exceptions below |
| if(is_16) |
| { |
| this.adjust_stack_reg(3 * 2); |
| this.update_eflags(new_flags | this.flags & ~0xFFFF); |
| } |
| else |
| { |
| this.adjust_stack_reg(3 * 4); |
| this.update_eflags(new_flags); |
| } |
| |
| // update vip and vif, which are not changed by update_eflags |
| if(this.cpl === 0) |
| { |
| this.flags = this.flags & ~flag_vif & ~flag_vip | (new_flags & (flag_vif | flag_vip)); |
| } |
| } |
| else |
| { |
| dbg_assert(false); |
| } |
| |
| this.sreg[reg_cs] = new_cs; |
| dbg_assert((new_cs & 3) === this.cpl); |
| |
| this.update_cs_size(info.size); |
| |
| this.segment_limits[reg_cs] = info.effective_limit; |
| this.segment_offsets[reg_cs] = info.base; |
| |
| this.instruction_pointer = new_eip + this.get_seg(reg_cs) | 0; |
| |
| CPU_LOG_VERBOSE && this.debug.dump_state("iret" + (is_16 ? "16" : "32") + " end"); |
| |
| this.handle_irqs(); |
| }; |
| |
| CPU.prototype.switch_cs_real_mode = function(selector) |
| { |
| dbg_assert(!this.protected_mode || this.vm86_mode()); |
| |
| this.sreg[reg_cs] = selector; |
| this.segment_is_null[reg_cs] = 0; |
| this.segment_offsets[reg_cs] = selector << 4; |
| }; |
| |
| CPU.prototype.far_return = function(eip, selector, stack_adjust) |
| { |
| dbg_assert(typeof selector === "number" && selector < 0x10000 && selector >= 0); |
| |
| //dbg_log("far return eip=" + h(eip >>> 0, 8) + " cs=" + h(selector, 4) + " stack_adjust=" + h(stack_adjust), LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("far ret start"); |
| |
| if(!this.protected_mode) |
| { |
| dbg_assert(!this.is_32); |
| //dbg_assert(!this.stack_size_32); |
| } |
| |
| if(!this.protected_mode || this.vm86_mode()) |
| { |
| this.switch_cs_real_mode(selector); |
| this.instruction_pointer = this.get_seg(reg_cs) + eip | 0; |
| this.adjust_stack_reg(2 * (this.is_osize_32() ? 4 : 2) + stack_adjust); |
| return; |
| } |
| |
| var info = this.lookup_segment_selector(selector); |
| |
| if(info.is_null) |
| { |
| dbg_log("null cs", LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(!info.is_valid) |
| { |
| dbg_log("invalid cs: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(info.is_system) |
| { |
| dbg_assert(false, "is system in far return"); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.is_executable) |
| { |
| dbg_log("non-executable cs: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(info.rpl < this.cpl) |
| { |
| dbg_log("cs rpl < cpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(info.dc_bit && info.dpl > info.rpl) |
| { |
| dbg_log("cs conforming and dpl > rpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.dc_bit && info.dpl !== info.rpl) |
| { |
| dbg_log("cs non-conforming and dpl != rpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NP for loading not-present in cs sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_np(selector & ~3); |
| } |
| |
| if(info.rpl > this.cpl) |
| { |
| dbg_log("far return privilege change cs: " + h(selector) + " from=" + this.cpl + " to=" + info.rpl + " is_16=" + this.is_osize_32(), LOG_CPU); |
| |
| if(this.is_osize_32()) |
| { |
| //dbg_log("esp read from " + h(this.translate_address_system_read(this.get_stack_pointer(stack_adjust + 8)))) |
| var temp_esp = this.safe_read32s(this.get_stack_pointer(stack_adjust + 8)); |
| //dbg_log("esp=" + h(temp_esp)); |
| var temp_ss = this.safe_read16(this.get_stack_pointer(stack_adjust + 12)); |
| } |
| else |
| { |
| //dbg_log("esp read from " + h(this.translate_address_system_read(this.get_stack_pointer(stack_adjust + 4)))); |
| var temp_esp = this.safe_read16(this.get_stack_pointer(stack_adjust + 4)); |
| //dbg_log("esp=" + h(temp_esp)); |
| var temp_ss = this.safe_read16(this.get_stack_pointer(stack_adjust + 6)); |
| } |
| |
| this.cpl = info.rpl; |
| this.cpl_changed(); |
| |
| // XXX: Can raise, conditions should be checked before side effects |
| this.switch_seg(reg_ss, temp_ss); |
| this.set_stack_reg(temp_esp + stack_adjust); |
| |
| //if(this.is_osize_32()) |
| //{ |
| // this.adjust_stack_reg(2 * 4); |
| //} |
| //else |
| //{ |
| // this.adjust_stack_reg(2 * 2); |
| //} |
| |
| //throw this.debug.unimpl("privilege change"); |
| |
| //this.adjust_stack_reg(stack_adjust); |
| } |
| else |
| { |
| if(this.is_osize_32()) |
| { |
| this.adjust_stack_reg(2 * 4 + stack_adjust); |
| } |
| else |
| { |
| this.adjust_stack_reg(2 * 2 + stack_adjust); |
| } |
| } |
| |
| //dbg_assert(this.cpl === info.dpl); |
| |
| this.update_cs_size(info.size); |
| |
| this.segment_is_null[reg_cs] = 0; |
| this.segment_limits[reg_cs] = info.effective_limit; |
| //this.segment_infos[reg_cs] = 0; // TODO |
| |
| this.segment_offsets[reg_cs] = info.base; |
| this.sreg[reg_cs] = selector; |
| |
| dbg_assert((selector & 3) === this.cpl); |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + eip | 0; |
| |
| //dbg_log("far return to:", LOG_CPU) |
| CPU_LOG_VERBOSE && this.debug.dump_state("far ret end"); |
| }; |
| |
| CPU.prototype.far_jump = function(eip, selector, is_call) |
| { |
| dbg_assert(typeof selector === "number" && selector < 0x10000 && selector >= 0); |
| |
| //dbg_log("far " + ["jump", "call"][+is_call] + " eip=" + h(eip >>> 0, 8) + " cs=" + h(selector, 4), LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state("far " + ["jump", "call"][+is_call]); |
| |
| if(!this.protected_mode || this.vm86_mode()) |
| { |
| if(is_call) |
| { |
| if(this.is_osize_32()) |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-8), 8); |
| this.push32(this.sreg[reg_cs]); |
| this.push32(this.get_real_eip()); |
| } |
| else |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-4), 4); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| } |
| } |
| this.switch_cs_real_mode(selector); |
| this.instruction_pointer = this.get_seg(reg_cs) + eip | 0; |
| return; |
| } |
| |
| var info = this.lookup_segment_selector(selector); |
| |
| if(info.is_null) |
| { |
| dbg_log("#gp null cs", LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(!info.is_valid) |
| { |
| dbg_log("#gp invalid cs: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(info.is_system) |
| { |
| dbg_assert(is_call, "TODO: Jump"); |
| |
| dbg_log("system type cs: " + h(selector), LOG_CPU); |
| |
| if(info.type === 0xC || info.type === 4) |
| { |
| // call gate |
| var is_16 = info.type === 4; |
| |
| if(info.dpl < this.cpl || info.dpl < info.rpl) |
| { |
| dbg_log("#gp cs gate dpl < cpl or dpl < rpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NP for loading not-present in gate cs sel=" + h(selector, 4), LOG_CPU); |
| this.trigger_np(selector & ~3); |
| } |
| |
| var cs_selector = info.raw0 >>> 16; |
| var cs_info = this.lookup_segment_selector(cs_selector); |
| |
| if(cs_info.is_null) |
| { |
| dbg_log("#gp null cs", LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(!cs_info.is_valid) |
| { |
| dbg_log("#gp invalid cs: " + h(cs_selector), LOG_CPU); |
| this.trigger_gp(cs_selector & ~3); |
| } |
| |
| if(!cs_info.is_executable) |
| { |
| dbg_log("#gp non-executable cs: " + h(cs_selector), LOG_CPU); |
| this.trigger_gp(cs_selector & ~3); |
| } |
| |
| if(cs_info.dpl > this.cpl) |
| { |
| dbg_log("#gp dpl > cpl: " + h(cs_selector), LOG_CPU); |
| this.trigger_gp(cs_selector & ~3); |
| } |
| |
| if(!cs_info.is_present) |
| { |
| dbg_log("#NP for loading not-present in cs sel=" + h(cs_selector, 4), LOG_CPU); |
| this.trigger_np(cs_selector & ~3); |
| } |
| |
| if(!cs_info.dc_bit && cs_info.dpl < this.cpl) |
| { |
| dbg_log("more privilege call gate is_16=" + is_16 + " from=" + this.cpl + " to=" + cs_info.dpl); |
| var tss_stack_addr = this.get_tss_stack_addr(cs_info.dpl); |
| |
| if(this.tss_size_32) |
| { |
| var new_esp = this.read32s(tss_stack_addr); |
| var new_ss = this.read16(tss_stack_addr + 4 | 0); |
| } |
| else |
| { |
| var new_esp = this.read16(tss_stack_addr); |
| var new_ss = this.read16(tss_stack_addr + 2 | 0); |
| } |
| var ss_info = this.lookup_segment_selector(new_ss); |
| |
| // Disabled: Incorrect handling of direction bit |
| // See http://css.csail.mit.edu/6.858/2014/readings/i386/s06_03.htm |
| //if(!((new_esp >>> 0) <= ss_info.effective_limit)) |
| // debugger; |
| //dbg_assert((new_esp >>> 0) <= ss_info.effective_limit); |
| dbg_assert(ss_info.is_valid && !ss_info.is_system && ss_info.is_writable); |
| |
| if(ss_info.is_null) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(ss_info.rpl !== cs_info.dpl) // xxx: 0 in v86 mode |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(ss_info.dpl !== cs_info.dpl || !ss_info.rw_bit) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| if(!ss_info.is_present) |
| { |
| throw this.debug.unimpl("#SS handler"); |
| } |
| |
| var parameter_count = info.raw1 & 0x1F; |
| var stack_space = is_16 ? 4 : 8; |
| if(is_call) |
| { |
| stack_space += is_16 ? 4 + 2 * parameter_count : 8 + 4 * parameter_count; |
| } |
| if(ss_info.size) |
| { |
| //try { |
| this.writable_or_pagefault(ss_info.base + new_esp - stack_space | 0, stack_space); // , cs_info.dpl |
| //} catch(e) { debugger; } |
| } |
| else |
| { |
| //try { |
| this.writable_or_pagefault(ss_info.base + (new_esp - stack_space & 0xFFFF) | 0, stack_space); // , cs_info.dpl |
| //} catch(e) { debugger; } |
| } |
| |
| var old_esp = this.reg32s[reg_esp]; |
| var old_ss = this.sreg[reg_ss]; |
| var old_stack_pointer = this.get_stack_pointer(0); |
| |
| //dbg_log("old_esp=" + h(old_esp)); |
| |
| this.cpl = cs_info.dpl; |
| this.cpl_changed(); |
| |
| this.update_cs_size(cs_info.size); |
| |
| this.switch_seg(reg_ss, new_ss); |
| this.set_stack_reg(new_esp); |
| |
| //dbg_log("parameter_count=" + parameter_count); |
| //dbg_assert(parameter_count === 0, "TODO"); |
| |
| if(is_16) |
| { |
| this.push16(old_ss); |
| this.push16(old_esp); |
| //dbg_log("old esp written to " + h(this.translate_address_system_read(this.get_stack_pointer(0)))); |
| } |
| else |
| { |
| this.push32(old_ss); |
| this.push32(old_esp); |
| //dbg_log("old esp written to " + h(this.translate_address_system_read(this.get_stack_pointer(0)))); |
| } |
| |
| if(is_call) |
| { |
| if(is_16) |
| { |
| for(var i = parameter_count - 1; i >= 0; i--) |
| { |
| var parameter = this.safe_read16(old_stack_pointer + 2 * i); |
| this.push16(parameter); |
| } |
| |
| //this.writable_or_pagefault(this.get_stack_pointer(-4), 4); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| } |
| else |
| { |
| for(var i = parameter_count - 1; i >= 0; i--) |
| { |
| var parameter = this.safe_read32s(old_stack_pointer + 4 * i); |
| this.push32(parameter); |
| } |
| |
| //this.writable_or_pagefault(this.get_stack_pointer(-8), 8); |
| this.push32(this.sreg[reg_cs]); |
| this.push32(this.get_real_eip()); |
| } |
| } |
| } |
| else |
| { |
| dbg_log("same privilege call gate is_16=" + is_16 + " from=" + this.cpl + " to=" + cs_info.dpl + " conforming=" + cs_info.dc_bit); |
| // ok |
| |
| if(is_call) |
| { |
| if(is_16) |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-4), 4); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| } |
| else |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-8), 8); |
| this.push32(this.sreg[reg_cs]); |
| this.push32(this.get_real_eip()); |
| } |
| } |
| } |
| |
| // Note: eip from call is ignored |
| var new_eip = info.raw0 & 0xFFFF; |
| if(!is_16) |
| { |
| new_eip |= info.raw1 & 0xFFFF0000; |
| } |
| |
| dbg_log("call gate eip=" + h(new_eip >>> 0) + " cs=" + h(cs_selector) + " conforming=" + cs_info.dc_bit); |
| dbg_assert((new_eip >>> 0) <= cs_info.effective_limit, "todo: #gp"); |
| |
| this.update_cs_size(cs_info.size); |
| |
| this.segment_is_null[reg_cs] = 0; |
| this.segment_limits[reg_cs] = cs_info.effective_limit; |
| //this.segment_infos[reg_cs] = 0; // TODO |
| this.segment_offsets[reg_cs] = cs_info.base; |
| this.sreg[reg_cs] = cs_selector & ~3 | this.cpl; |
| dbg_assert((this.sreg[reg_cs] & 3) === this.cpl); |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + new_eip | 0; |
| } |
| else |
| { |
| var types = { 9: "Available 386 TSS", 0xb: "Busy 386 TSS", 4: "286 Call Gate", 0xc: "386 Call Gate" }; |
| throw this.debug.unimpl("load system segment descriptor, type = " + (info.access & 15) + " (" + types[info.access & 15] + ")"); |
| } |
| } |
| else |
| { |
| if(!info.is_executable) |
| { |
| dbg_log("#gp non-executable cs: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(info.dc_bit) |
| { |
| // conforming code segment |
| if(info.dpl > this.cpl) |
| { |
| dbg_log("#gp cs dpl > cpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| } |
| else |
| { |
| // non-conforming code segment |
| |
| if(info.rpl > this.cpl || info.dpl !== this.cpl) |
| { |
| dbg_log("#gp cs rpl > cpl or dpl != cpl: " + h(selector), LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NP for loading not-present in cs sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_np(selector & ~3); |
| } |
| |
| if(is_call) |
| { |
| if(this.is_osize_32()) |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-8), 8); |
| this.push32(this.sreg[reg_cs]); |
| this.push32(this.get_real_eip()); |
| } |
| else |
| { |
| this.writable_or_pagefault(this.get_stack_pointer(-4), 4); |
| this.push16(this.sreg[reg_cs]); |
| this.push16(this.get_real_eip()); |
| } |
| } |
| |
| dbg_assert((eip >>> 0) <= info.effective_limit, "todo: #gp"); |
| |
| this.update_cs_size(info.size); |
| |
| this.segment_is_null[reg_cs] = 0; |
| this.segment_limits[reg_cs] = info.effective_limit; |
| //this.segment_infos[reg_cs] = 0; // TODO |
| |
| this.segment_offsets[reg_cs] = info.base; |
| this.sreg[reg_cs] = selector & ~3 | this.cpl; |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + eip | 0; |
| } |
| |
| //dbg_log("far " + ["jump", "call"][+is_call] + " to:", LOG_CPU) |
| CPU_LOG_VERBOSE && this.debug.dump_state("far " + ["jump", "call"][+is_call] + " end"); |
| }; |
| |
| CPU.prototype.get_tss_stack_addr = function(dpl) |
| { |
| if(this.tss_size_32) |
| { |
| var tss_stack_addr = (dpl << 3) + 4 | 0; |
| |
| if((tss_stack_addr + 5 | 0) > this.segment_limits[reg_tr]) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| tss_stack_addr = tss_stack_addr + this.segment_offsets[reg_tr] | 0; |
| |
| dbg_assert((tss_stack_addr & 0xFFF) <= 0x1000 - 6); |
| } |
| else |
| { |
| var tss_stack_addr = (dpl << 2) + 2 | 0; |
| |
| if((tss_stack_addr + 5 | 0) > this.segment_limits[reg_tr]) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| tss_stack_addr = tss_stack_addr + this.segment_offsets[reg_tr] | 0; |
| dbg_assert((tss_stack_addr & 0xFFF) <= 0x1000 - 4); |
| } |
| |
| if(this.paging) |
| { |
| tss_stack_addr = this.translate_address_system_read(tss_stack_addr); |
| } |
| |
| return tss_stack_addr; |
| }; |
| |
| CPU.prototype.do_task_switch = function(selector, error_code) |
| { |
| dbg_assert(this.tss_size_32, "TODO"); |
| |
| dbg_log("do_task_switch sel=" + h(selector), LOG_CPU); |
| var descriptor = this.lookup_segment_selector(selector); |
| |
| dbg_assert((descriptor.type | 2) === 3 || (descriptor.type | 2) === 0xb); |
| var tss_is_16 = descriptor.type <= 3; |
| var tss_is_busy = (descriptor.type & 2) === 2; |
| |
| if(!descriptor.is_valid || descriptor.is_null || !descriptor.from_gdt) |
| { |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if((descriptor.access & 31) === 0xB) |
| { |
| // is busy |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(!descriptor.is_present) |
| { |
| throw this.debug.unimpl("#NP handler"); |
| } |
| |
| if(descriptor.effective_limit < 103) |
| { |
| throw this.debug.unimpl("#NP handler"); |
| } |
| |
| var tsr_size = this.segment_limits[reg_tr]; |
| var tsr_offset = this.segment_offsets[reg_tr]; |
| |
| var old_eflags = this.get_eflags(); |
| |
| if(tss_is_busy) |
| { |
| old_eflags &= ~flag_nt; |
| } |
| |
| this.writable_or_pagefault(tsr_offset, 0x66); |
| |
| //this.safe_write32(tsr_offset + TSR_CR3, this.cr[3]); |
| |
| // TODO: Write 16 bit values if old tss is 16 bit |
| this.safe_write32(tsr_offset + TSR_EIP, this.get_real_eip()); |
| this.safe_write32(tsr_offset + TSR_EFLAGS, old_eflags); |
| |
| this.safe_write32(tsr_offset + TSR_EAX, this.reg32s[reg_eax]); |
| this.safe_write32(tsr_offset + TSR_ECX, this.reg32s[reg_ecx]); |
| this.safe_write32(tsr_offset + TSR_EDX, this.reg32s[reg_edx]); |
| this.safe_write32(tsr_offset + TSR_EBX, this.reg32s[reg_ebx]); |
| |
| this.safe_write32(tsr_offset + TSR_ESP, this.reg32s[reg_esp]); |
| this.safe_write32(tsr_offset + TSR_EBP, this.reg32s[reg_ebp]); |
| this.safe_write32(tsr_offset + TSR_ESI, this.reg32s[reg_esi]); |
| this.safe_write32(tsr_offset + TSR_EDI, this.reg32s[reg_edi]); |
| |
| this.safe_write32(tsr_offset + TSR_ES, this.sreg[reg_es]); |
| this.safe_write32(tsr_offset + TSR_CS, this.sreg[reg_cs]); |
| this.safe_write32(tsr_offset + TSR_SS, this.sreg[reg_ss]); |
| this.safe_write32(tsr_offset + TSR_DS, this.sreg[reg_ds]); |
| this.safe_write32(tsr_offset + TSR_FS, this.sreg[reg_fs]); |
| this.safe_write32(tsr_offset + TSR_GS, this.sreg[reg_gs]); |
| |
| //this.safe_write32(tsr_offset + TSR_LDT, this.sreg[reg_ldtr]); |
| |
| if(true /* is jump or call or int */) |
| { |
| // mark as busy |
| this.write8(descriptor.table_offset + 5 | 0, this.read8(descriptor.table_offset + 5 | 0) | 2); |
| } |
| |
| //var new_tsr_size = descriptor.effective_limit; |
| var new_tsr_offset = descriptor.base; |
| |
| dbg_assert(!tss_is_16, "unimplemented"); |
| |
| if(true /* is call or int */) |
| { |
| this.safe_write16(new_tsr_offset + TSR_BACKLINK, this.sreg[reg_tr]); |
| } |
| |
| var new_cr3 = this.safe_read32s(new_tsr_offset + TSR_CR3); |
| |
| this.flags &= ~flag_vm; |
| |
| var new_eip = this.safe_read32s(new_tsr_offset + TSR_EIP); |
| var new_cs = this.safe_read16(new_tsr_offset + TSR_CS); |
| var info = this.lookup_segment_selector(new_cs); |
| |
| if(info.is_null) |
| { |
| dbg_log("null cs", LOG_CPU); |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(!info.is_valid) |
| { |
| dbg_log("invalid cs: " + h(selector), LOG_CPU); |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(info.is_system) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(!info.is_executable) |
| { |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(info.dc_bit && info.dpl > info.rpl) |
| { |
| dbg_log("cs conforming and dpl > rpl: " + h(selector), LOG_CPU); |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(!info.dc_bit && info.dpl !== info.rpl) |
| { |
| dbg_log("cs non-conforming and dpl != rpl: " + h(selector), LOG_CPU); |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NP for loading not-present in cs sel=" + h(selector, 4), LOG_CPU); |
| throw this.debug.unimpl("#TS handler"); |
| } |
| |
| this.segment_is_null[reg_cs] = 0; |
| this.segment_limits[reg_cs] = info.effective_limit; |
| this.segment_offsets[reg_cs] = info.base; |
| this.sreg[reg_cs] = new_cs; |
| |
| this.cpl = info.dpl; |
| this.cpl_changed(); |
| |
| dbg_assert((this.sreg[reg_cs] & 3) === this.cpl); |
| |
| dbg_assert((new_eip >>> 0) <= info.effective_limit, "todo: #gp"); |
| this.update_cs_size(info.size); |
| |
| var new_eflags = this.safe_read32s(new_tsr_offset + TSR_EFLAGS); |
| |
| if(true /* is call or int */) |
| { |
| this.safe_write32(tsr_offset + TSR_BACKLINK, selector); |
| new_eflags |= flag_nt; |
| } |
| |
| if(new_eflags & flag_vm) |
| { |
| throw this.debug.unimpl("task switch to VM mode"); |
| } |
| |
| this.update_eflags(new_eflags); |
| |
| if(true /* call or int */) |
| { |
| this.flags |= flag_nt; |
| } |
| |
| var new_ldt = this.safe_read16(new_tsr_offset + TSR_LDT); |
| this.load_ldt(new_ldt); |
| |
| this.reg32s[reg_eax] = this.safe_read32s(new_tsr_offset + TSR_EAX); |
| this.reg32s[reg_ecx] = this.safe_read32s(new_tsr_offset + TSR_ECX); |
| this.reg32s[reg_edx] = this.safe_read32s(new_tsr_offset + TSR_EDX); |
| this.reg32s[reg_ebx] = this.safe_read32s(new_tsr_offset + TSR_EBX); |
| |
| this.reg32s[reg_esp] = this.safe_read32s(new_tsr_offset + TSR_ESP); |
| this.reg32s[reg_ebp] = this.safe_read32s(new_tsr_offset + TSR_EBP); |
| this.reg32s[reg_esi] = this.safe_read32s(new_tsr_offset + TSR_ESI); |
| this.reg32s[reg_edi] = this.safe_read32s(new_tsr_offset + TSR_EDI); |
| |
| this.switch_seg(reg_es, this.safe_read16(new_tsr_offset + TSR_ES)); |
| this.switch_seg(reg_ss, this.safe_read16(new_tsr_offset + TSR_SS)); |
| this.switch_seg(reg_ds, this.safe_read16(new_tsr_offset + TSR_DS)); |
| this.switch_seg(reg_fs, this.safe_read16(new_tsr_offset + TSR_FS)); |
| this.switch_seg(reg_gs, this.safe_read16(new_tsr_offset + TSR_GS)); |
| |
| this.instruction_pointer = this.get_seg(reg_cs) + new_eip | 0; |
| |
| this.segment_offsets[reg_tr] = descriptor.base; |
| this.segment_limits[reg_tr] = descriptor.effective_limit; |
| this.sreg[reg_tr] = selector; |
| |
| this.cr[3] = new_cr3; |
| dbg_assert((this.cr[3] & 0xFFF) === 0); |
| this.clear_tlb(); |
| |
| this.cr[0] |= CR0_TS; |
| |
| if(error_code !== false) |
| { |
| if(tss_is_16) |
| { |
| this.push16(error_code & 0xFFFF); |
| } |
| else |
| { |
| this.push32(error_code); |
| } |
| } |
| }; |
| |
| CPU.prototype.hlt_op = function() |
| { |
| if(this.cpl) |
| { |
| this.trigger_gp(0); |
| } |
| |
| if((this.flags & flag_interrupt) === 0) |
| { |
| this.debug.show("cpu halted"); |
| this.bus.send("cpu-event-halt"); |
| if(DEBUG) this.debug.dump_regs(); |
| throw "HALT"; |
| } |
| else |
| { |
| // get out of here and into hlt_loop |
| this.in_hlt = true; |
| |
| //if(false) // possibly unsafe, test in safari |
| //{ |
| // this.hlt_loop(); |
| // this.diverged(); |
| // if(this.in_hlt) |
| // { |
| // throw MAGIC_CPU_EXCEPTION; |
| // } |
| //} |
| //else |
| { |
| throw MAGIC_CPU_EXCEPTION; |
| } |
| } |
| }; |
| |
| // assumes ip to point to the byte before the next instruction |
| CPU.prototype.raise_exception = function(interrupt_nr) |
| { |
| //if(DEBUG && interrupt_nr !== 7) |
| //{ |
| // // show interesting exceptions |
| // dbg_log("Exception " + h(interrupt_nr) + " at " + h(this.previous_ip >>> 0, 8) + " (cs=" + h(this.sreg[reg_cs], 4) + ")", LOG_CPU); |
| // dbg_trace(LOG_CPU); |
| // this.debug.dump_regs(); |
| // this.debug.dump_state(); |
| //} |
| |
| this.call_interrupt_vector(interrupt_nr, false, false); |
| throw MAGIC_CPU_EXCEPTION; |
| }; |
| |
| CPU.prototype.raise_exception_with_code = function(interrupt_nr, error_code) |
| { |
| dbg_assert(typeof error_code === "number"); |
| |
| //if(DEBUG) |
| //{ |
| // dbg_log("Exception " + h(interrupt_nr) + " err=" + h(error_code) + " at " + h(this.previous_ip >>> 0, 8) + " (cs=" + h(this.sreg[reg_cs], 4) + ")", LOG_CPU); |
| // dbg_trace(LOG_CPU); |
| // this.debug.dump_regs(); |
| //} |
| |
| this.call_interrupt_vector(interrupt_nr, false, error_code); |
| throw MAGIC_CPU_EXCEPTION; |
| }; |
| |
| CPU.prototype.trigger_de = function() |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception(0); |
| }; |
| |
| CPU.prototype.trigger_ud = function() |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception(6); |
| }; |
| |
| CPU.prototype.trigger_nm = function() |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception(7); |
| }; |
| |
| CPU.prototype.trigger_ts = function(code) |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception_with_code(10, code); |
| }; |
| |
| CPU.prototype.trigger_gp = function(code) |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception_with_code(13, code); |
| }; |
| |
| CPU.prototype.trigger_np = function(code) |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception_with_code(11, code); |
| }; |
| |
| CPU.prototype.trigger_ss = function(code) |
| { |
| this.instruction_pointer = this.previous_ip; |
| this.raise_exception_with_code(12, code); |
| }; |
| |
| // used before fpu instructions |
| CPU.prototype.task_switch_test = function() |
| { |
| if(this.cr[0] & (CR0_EM | CR0_TS)) |
| { |
| this.trigger_nm(); |
| } |
| }; |
| |
| // used before mmx instructions |
| CPU.prototype.task_switch_test_mmx = function() |
| { |
| if(this.cr[0] & (CR0_EM | CR0_TS)) |
| { |
| if(this.cr[0] & CR0_TS) |
| { |
| this.trigger_nm(); |
| } |
| else |
| { |
| this.trigger_ud(); |
| } |
| } |
| |
| }; |
| |
| CPU.prototype.todo = function() |
| { |
| if(DEBUG) |
| { |
| dbg_trace(); |
| throw "TODO"; |
| } |
| |
| this.trigger_ud(); |
| }; |
| |
| CPU.prototype.undefined_instruction = function() |
| { |
| dbg_assert(false, "Possible fault: undefined instruction"); |
| this.trigger_ud(); |
| }; |
| |
| CPU.prototype.unimplemented_sse = function() |
| { |
| dbg_log("No SSE", LOG_CPU); |
| dbg_assert(false); |
| this.trigger_ud(); |
| }; |
| |
| CPU.prototype.get_seg_prefix_ds = function() |
| { |
| return this.get_seg_prefix(reg_ds); |
| }; |
| |
| CPU.prototype.get_seg_prefix_ss = function() |
| { |
| return this.get_seg_prefix(reg_ss); |
| }; |
| |
| CPU.prototype.get_seg_prefix_cs = function() |
| { |
| return this.get_seg_prefix(reg_cs); |
| }; |
| |
| /** |
| * Get segment base by prefix or default |
| * @param {number} default_segment |
| */ |
| CPU.prototype.get_seg_prefix = function(default_segment /*, offset*/) |
| { |
| var prefix = this.prefixes & PREFIX_MASK_SEGMENT; |
| |
| if(prefix) |
| { |
| if(prefix === SEG_PREFIX_ZERO) |
| { |
| return 0; |
| } |
| else |
| { |
| return this.get_seg(prefix - 1 /*, offset*/); |
| } |
| } |
| else |
| { |
| return this.get_seg(default_segment /*, offset*/); |
| } |
| }; |
| |
| /** |
| * Get segment base |
| * @param {number} segment |
| */ |
| CPU.prototype.get_seg = function(segment /*, offset*/) |
| { |
| dbg_assert(segment >= 0 && segment < 8); |
| |
| if(this.protected_mode) |
| { |
| if(this.segment_is_null[segment]) |
| { |
| dbg_assert(segment !== reg_cs && segment !== reg_ss); |
| dbg_trace(); |
| dbg_log("#gp Use null segment: " + segment + " sel=" + h(this.sreg[segment], 4), LOG_CPU); |
| |
| this.trigger_gp(0); |
| } |
| |
| // TODO: |
| // - validate segment limits |
| // - validate if segment is writable |
| } |
| |
| return this.segment_offsets[segment]; |
| }; |
| |
| CPU.prototype.read_e8 = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read8(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| return this.reg8[this.modrm_byte << 2 & 0xC | this.modrm_byte >> 2 & 1]; |
| } |
| }; |
| |
| CPU.prototype.read_e8s = function() |
| { |
| return this.read_e8() << 24 >> 24; |
| }; |
| |
| CPU.prototype.read_e16 = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read16(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| return this.reg16[this.modrm_byte << 1 & 14]; |
| } |
| }; |
| |
| CPU.prototype.read_e16s = function() |
| { |
| return this.read_e16() << 16 >> 16; |
| }; |
| |
| CPU.prototype.read_e32s = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read32s(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| return this.reg32s[this.modrm_byte & 7]; |
| } |
| }; |
| |
| CPU.prototype.read_e32 = function() |
| { |
| return this.read_e32s() >>> 0; |
| }; |
| |
| CPU.prototype.read_mmx_mem32s = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read32s(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| // Returning lower dword of qword |
| return this.reg_mmxs[2 * (this.modrm_byte & 7)]; |
| } |
| }; |
| |
| CPU.prototype.read_mmx_mem64s = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read64s(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| return this.create_atom64s( |
| this.reg_mmxs[2 * (this.modrm_byte & 7)], |
| this.reg_mmxs[2 * (this.modrm_byte & 7) + 1] |
| ); |
| } |
| }; |
| |
| CPU.prototype.read_xmm_mem64s = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read64s(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| let i = (this.modrm_byte & 7) << 2; |
| return this.create_atom64s( |
| this.reg_xmm32s[i], |
| this.reg_xmm32s[i | 1] |
| ); |
| } |
| }; |
| |
| CPU.prototype.read_xmm_mem128s = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read128s_aligned(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| let i = (this.modrm_byte & 7) << 2; |
| return this.create_atom128s( |
| this.reg_xmm32s[i], |
| this.reg_xmm32s[i | 1], |
| this.reg_xmm32s[i | 2], |
| this.reg_xmm32s[i | 3] |
| ); |
| } |
| }; |
| |
| CPU.prototype.read_xmm_mem128s_unaligned = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| return this.safe_read128s_unaligned(this.modrm_resolve(this.modrm_byte)); |
| } else { |
| let i = (this.modrm_byte & 7) << 2; |
| return this.create_atom128s( |
| this.reg_xmm32s[i], |
| this.reg_xmm32s[i | 1], |
| this.reg_xmm32s[i | 2], |
| this.reg_xmm32s[i | 3] |
| ); |
| } |
| }; |
| |
| CPU.prototype.set_e8 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| var addr = this.modrm_resolve(this.modrm_byte); |
| this.safe_write8(addr, value); |
| } else { |
| this.reg8[this.modrm_byte << 2 & 0xC | this.modrm_byte >> 2 & 1] = value; |
| } |
| }; |
| |
| CPU.prototype.set_e16 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| var addr = this.modrm_resolve(this.modrm_byte); |
| this.safe_write16(addr, value); |
| } else { |
| this.reg16[this.modrm_byte << 1 & 14] = value; |
| } |
| }; |
| |
| CPU.prototype.set_e32 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| var addr = this.modrm_resolve(this.modrm_byte); |
| this.safe_write32(addr, value); |
| } else { |
| this.reg32s[this.modrm_byte & 7] = value; |
| } |
| }; |
| |
| CPU.prototype.set_mmx_mem64s = function(low, high) |
| { |
| if(this.modrm_byte < 0xC0) { |
| var addr = this.modrm_resolve(this.modrm_byte); |
| this.safe_write64(addr, low, high); |
| } else { |
| this.reg_mmxs[2 * (this.modrm_byte & 7)] = low; |
| this.reg_mmxs[2 * (this.modrm_byte & 7) + 1] = high; |
| } |
| }; |
| |
| CPU.prototype.read_write_e8 = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| var virt_addr = this.modrm_resolve(this.modrm_byte); |
| this.phys_addr = this.translate_address_write(virt_addr); |
| return this.read8(this.phys_addr); |
| } else { |
| return this.reg8[this.modrm_byte << 2 & 0xC | this.modrm_byte >> 2 & 1]; |
| } |
| }; |
| |
| CPU.prototype.write_e8 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| this.write8(this.phys_addr, value); |
| } |
| else { |
| this.reg8[this.modrm_byte << 2 & 0xC | this.modrm_byte >> 2 & 1] = value; |
| } |
| }; |
| |
| CPU.prototype.read_write_e16 = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| var virt_addr = this.modrm_resolve(this.modrm_byte); |
| this.phys_addr = this.translate_address_write(virt_addr); |
| if(this.paging && (virt_addr & 0xFFF) === 0xFFF) { |
| this.phys_addr_high = this.translate_address_write(virt_addr + 1 | 0); |
| dbg_assert(this.phys_addr_high); |
| return this.virt_boundary_read16(this.phys_addr, this.phys_addr_high); |
| } else { |
| this.phys_addr_high = 0; |
| return this.read16(this.phys_addr); |
| } |
| } else { |
| return this.reg16[this.modrm_byte << 1 & 14]; |
| } |
| }; |
| |
| CPU.prototype.write_e16 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| if(this.phys_addr_high) { |
| this.virt_boundary_write16(this.phys_addr, this.phys_addr_high, value); |
| } else { |
| this.write16(this.phys_addr, value); |
| } |
| } else { |
| this.reg16[this.modrm_byte << 1 & 14] = value; |
| } |
| }; |
| |
| CPU.prototype.read_write_e32 = function() |
| { |
| if(this.modrm_byte < 0xC0) { |
| var virt_addr = this.modrm_resolve(this.modrm_byte); |
| this.phys_addr = this.translate_address_write(virt_addr); |
| if(this.paging && (virt_addr & 0xFFF) >= 0xFFD) { |
| //this.phys_addr_high = this.translate_address_write(virt_addr + 3 | 0); |
| this.phys_addr_high = this.translate_address_write(virt_addr + 3 & ~3) | (virt_addr + 3) & 3; |
| dbg_assert(this.phys_addr_high); |
| return this.virt_boundary_read32s(this.phys_addr, this.phys_addr_high); |
| } else { |
| this.phys_addr_high = 0; |
| return this.read32s(this.phys_addr); |
| } |
| } else { |
| return this.reg32s[this.modrm_byte & 7]; |
| } |
| }; |
| |
| CPU.prototype.write_e32 = function(value) |
| { |
| if(this.modrm_byte < 0xC0) { |
| if(this.phys_addr_high) { |
| this.virt_boundary_write32(this.phys_addr, this.phys_addr_high, value); |
| } else { |
| this.write32(this.phys_addr, value); |
| } |
| } else { |
| this.reg32s[this.modrm_byte & 7] = value; |
| } |
| }; |
| |
| CPU.prototype.read_reg_e16 = function() |
| { |
| return this.reg16[this.modrm_byte << 1 & 14]; |
| }; |
| |
| CPU.prototype.write_reg_e16 = function(value) |
| { |
| this.reg16[this.modrm_byte << 1 & 14] = value; |
| }; |
| |
| CPU.prototype.read_reg_e32s = function() |
| { |
| return this.reg32s[this.modrm_byte & 7]; |
| }; |
| |
| CPU.prototype.write_reg_e32 = function(value) |
| { |
| this.reg32s[this.modrm_byte & 7] = value; |
| }; |
| |
| CPU.prototype.read_g8 = function() |
| { |
| return this.reg8[this.modrm_byte >> 1 & 0xC | this.modrm_byte >> 5 & 1]; |
| }; |
| |
| CPU.prototype.write_g8 = function(value) |
| { |
| this.reg8[this.modrm_byte >> 1 & 0xC | this.modrm_byte >> 5 & 1] = value; |
| }; |
| |
| CPU.prototype.read_g16 = function() |
| { |
| return this.reg16[this.modrm_byte >> 2 & 14]; |
| }; |
| |
| CPU.prototype.read_g16s = function() |
| { |
| return this.reg16s[this.modrm_byte >> 2 & 14]; |
| }; |
| |
| CPU.prototype.write_g16 = function(value) |
| { |
| this.reg16[this.modrm_byte >> 2 & 14] = value; |
| }; |
| |
| CPU.prototype.read_g32s = function() |
| { |
| return this.reg32s[this.modrm_byte >> 3 & 7]; |
| }; |
| |
| CPU.prototype.write_g32 = function(value) |
| { |
| this.reg32[this.modrm_byte >> 3 & 7] = value; |
| }; |
| |
| CPU.prototype.read_xmm64s = function() |
| { |
| return this.create_atom64s( |
| this.reg_xmm32s[(this.modrm_byte >> 3 & 7) << 2], |
| this.reg_xmm32s[(this.modrm_byte >> 3 & 7) << 2 | 1] |
| ); |
| }; |
| |
| CPU.prototype.read_xmm128s = function() |
| { |
| let i = (this.modrm_byte >> 3 & 7) << 2; |
| return this.create_atom128s( |
| this.reg_xmm32s[i | 0], |
| this.reg_xmm32s[i | 1], |
| this.reg_xmm32s[i | 2], |
| this.reg_xmm32s[i | 3] |
| ); |
| }; |
| |
| CPU.prototype.read_mmx64s = function() |
| { |
| return this.create_atom64s( |
| this.reg_mmxs[2 * (this.modrm_byte >> 3 & 7)], |
| this.reg_mmxs[2 * (this.modrm_byte >> 3 & 7) + 1] |
| ); |
| }; |
| |
| CPU.prototype.write_mmx64s = function(low, high) |
| { |
| this.reg_mmxs[2 * (this.modrm_byte >> 3 & 7)] = low; |
| this.reg_mmxs[2 * (this.modrm_byte >> 3 & 7) + 1] = high; |
| }; |
| |
| CPU.prototype.write_xmm64 = function(low, high) |
| { |
| let i = (this.modrm_byte >> 3 & 7) << 2; |
| this.reg_xmm32s[i] = low; |
| this.reg_xmm32s[i + 1] = high; |
| }; |
| |
| CPU.prototype.write_xmm128s = function(d0, d1, d2, d3) |
| { |
| let i = (this.modrm_byte >> 3 & 7) << 2; |
| this.reg_xmm32s[i] = d0; |
| this.reg_xmm32s[i + 1] = d1; |
| this.reg_xmm32s[i + 2] = d2; |
| this.reg_xmm32s[i + 3] = d3; |
| }; |
| |
| CPU.prototype.pic_call_irq = function(int) |
| { |
| try |
| { |
| this.previous_ip = this.instruction_pointer; |
| this.call_interrupt_vector(int, false, false); |
| } |
| catch(e) |
| { |
| this.exception_cleanup(e); |
| } |
| }; |
| |
| CPU.prototype.handle_irqs = function() |
| { |
| dbg_assert(!this.page_fault); |
| |
| this.diverged(); |
| |
| if((this.flags & flag_interrupt) && !this.page_fault) |
| { |
| if(this.devices.pic) |
| { |
| this.devices.pic.acknowledge_irq(); |
| } |
| |
| if(this.devices.apic) |
| { |
| this.devices.apic.acknowledge_irq(); |
| } |
| } |
| }; |
| |
| CPU.prototype.device_raise_irq = function(i) |
| { |
| dbg_assert(arguments.length === 1); |
| if(this.devices.pic) |
| { |
| this.devices.pic.set_irq(i); |
| } |
| |
| if(this.devices.ioapic) |
| { |
| this.devices.ioapic.set_irq(i); |
| } |
| }; |
| |
| CPU.prototype.device_lower_irq = function(i) |
| { |
| if(this.devices.pic) |
| { |
| this.devices.pic.clear_irq(i); |
| } |
| |
| if(this.devices.ioapic) |
| { |
| this.devices.ioapic.clear_irq(i); |
| } |
| }; |
| |
| CPU.prototype.test_privileges_for_io = function(port, size) |
| { |
| if(this.protected_mode && (this.cpl > this.getiopl() || (this.flags & flag_vm))) |
| { |
| if(!this.tss_size_32) |
| { |
| dbg_log("#GP for port io, 16-bit TSS port=" + h(port) + " size=" + size, LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state(); |
| this.trigger_gp(0); |
| } |
| |
| var tsr_size = this.segment_limits[reg_tr]; |
| var tsr_offset = this.segment_offsets[reg_tr]; |
| |
| if(tsr_size >= 0x67) |
| { |
| dbg_assert((tsr_offset + 0x64 + 2 & 0xFFF) < 0xFFF); |
| |
| var iomap_base = this.read16(this.translate_address_system_read(tsr_offset + 0x64 + 2 | 0)), |
| high_port = port + size - 1 | 0; |
| |
| if(tsr_size >= (iomap_base + (high_port >> 3) | 0)) |
| { |
| var mask = ((1 << size) - 1) << (port & 7), |
| addr = this.translate_address_system_read(tsr_offset + iomap_base + (port >> 3) | 0), |
| port_info = (mask & 0xFF00) ? |
| this.read16(addr) : this.read8(addr); |
| |
| dbg_assert((addr & 0xFFF) < 0xFFF); |
| |
| if(!(port_info & mask)) |
| { |
| return; |
| } |
| } |
| } |
| |
| dbg_log("#GP for port io port=" + h(port) + " size=" + size, LOG_CPU); |
| CPU_LOG_VERBOSE && this.debug.dump_state(); |
| this.trigger_gp(0); |
| } |
| }; |
| |
| CPU.prototype.cpuid = function() |
| { |
| // cpuid |
| // TODO: Fill in with less bogus values |
| |
| // http://lxr.linux.no/linux+%2a/arch/x86/include/asm/cpufeature.h |
| // http://www.sandpile.org/x86/cpuid.htm |
| |
| var eax = 0; |
| var ecx = 0; |
| var edx = 0; |
| var ebx = 0; |
| |
| var winnt_fix = false; |
| |
| switch(this.reg32s[reg_eax]) |
| { |
| case 0: |
| // maximum supported level |
| if(winnt_fix) |
| { |
| eax = 2; |
| } |
| else |
| { |
| eax = 5; |
| } |
| |
| ebx = 0x756E6547|0; // Genu |
| edx = 0x49656E69|0; // ineI |
| ecx = 0x6C65746E|0; // ntel |
| break; |
| |
| case 1: |
| // pentium |
| eax = 3 | 6 << 4 | 15 << 8; |
| ebx = 1 << 16 | 8 << 8; // cpu count, clflush size |
| ecx = 1 << 23 | 1 << 30; // popcnt, rdrand |
| var vme = 0 << 1; |
| if(VMWARE_HYPERVISOR_PORT) ecx |= 1 << 31; // hypervisor |
| edx = (this.fpu ? 1 : 0) | // fpu |
| vme | 1 << 3 | 1 << 4 | 1 << 5 | // vme, pse, tsc, msr |
| 1 << 8 | 1 << 11 | 1 << 13 | 1 << 15 | // cx8, sep, pge, cmov |
| 0 << 23 | 0 << 24 | 0 << 25 | 0 << 26; // mmx, fxsr, sse, sse2 |
| |
| if(ENABLE_ACPI && this.apic_enabled) |
| { |
| edx |= 1 << 9; // apic |
| } |
| break; |
| |
| case 2: |
| // Taken from http://siyobik.info.gf/main/reference/instruction/CPUID |
| eax = 0x665B5001|0; |
| ebx = 0; |
| ecx = 0; |
| edx = 0x007A7000; |
| break; |
| |
| case 4: |
| // from my local machine |
| switch(this.reg32s[reg_ecx]) |
| { |
| case 0: |
| eax = 0x00000121; |
| ebx = 0x01c0003f; |
| ecx = 0x0000003f; |
| edx = 0x00000001; |
| break; |
| case 1: |
| eax = 0x00000122; |
| ebx = 0x01c0003f; |
| ecx = 0x0000003f; |
| edx = 0x00000001; |
| break; |
| case 2: |
| eax = 0x00000143; |
| ebx = 0x05c0003f; |
| ecx = 0x00000fff; |
| edx = 0x00000001; |
| break; |
| } |
| break; |
| |
| case 5: |
| // from my local machine |
| eax = 0x40; |
| ebx = 0x40; |
| ecx = 3; |
| edx = 0x00142120; |
| break; |
| |
| case 0x80000000|0: |
| // maximum supported extended level |
| eax = 5; |
| // other registers are reserved |
| break; |
| |
| case 0x40000000|0: // hypervisor |
| if(VMWARE_HYPERVISOR_PORT) |
| { |
| // h("Ware".split("").reduce((a, c, i) => a | c.charCodeAt(0) << i * 8, 0)) |
| ebx = 0x61774D56|0; // VMwa |
| ecx = 0x4D566572|0; // reVM |
| edx = 0x65726177|0; // ware |
| } |
| break; |
| |
| default: |
| dbg_log("cpuid: unimplemented eax: " + h(this.reg32[reg_eax]), LOG_CPU); |
| } |
| |
| dbg_log("cpuid: eax=" + h(this.reg32[reg_eax], 8) + " cl=" + h(this.reg8[reg_cl], 2), LOG_CPU); |
| |
| this.reg32s[reg_eax] = eax; |
| this.reg32s[reg_ecx] = ecx; |
| this.reg32s[reg_edx] = edx; |
| this.reg32s[reg_ebx] = ebx; |
| }; |
| |
| CPU.prototype.update_cs_size = function(new_size) |
| { |
| dbg_assert(typeof new_size === "boolean"); |
| |
| if(this.is_32 !== new_size) |
| { |
| this.clear_instruction_cache(); |
| this.is_32 = new_size; |
| this.update_operand_size(); |
| } |
| }; |
| |
| CPU.prototype.update_operand_size = function() |
| { |
| if(this.is_32) |
| { |
| this.table = this.table32; |
| } |
| else |
| { |
| this.table = this.table16; |
| } |
| }; |
| |
| /** |
| * @param {number} selector |
| */ |
| CPU.prototype.lookup_segment_selector = function(selector) |
| { |
| dbg_assert(typeof selector === "number" && selector >= 0 && selector < 0x10000); |
| |
| var is_gdt = (selector & 4) === 0, |
| selector_offset = selector & ~7, |
| info, |
| table_offset, |
| table_limit; |
| |
| info = { |
| rpl: selector & 3, |
| from_gdt: is_gdt, |
| is_null: false, |
| is_valid: true, |
| |
| base: 0, |
| access: 0, |
| flags: 0, |
| type: 0, |
| dpl: 0, |
| is_system: false, |
| is_present: false, |
| is_executable: false, |
| rw_bit: false, |
| dc_bit: false, |
| size: false, |
| |
| is_conforming_executable: false, |
| |
| // limit after applying granularity |
| effective_limit: 0, |
| |
| is_writable: false, |
| is_readable: false, |
| table_offset: 0, |
| |
| raw0: 0, |
| raw1: 0, |
| }; |
| |
| if(is_gdt) |
| { |
| table_offset = this.gdtr_offset; |
| table_limit = this.gdtr_size; |
| } |
| else |
| { |
| table_offset = this.segment_offsets[reg_ldtr]; |
| table_limit = this.segment_limits[reg_ldtr]; |
| } |
| |
| if(is_gdt && selector_offset === 0) |
| { |
| info.is_null = true; |
| return info; |
| } |
| |
| // limit is the number of entries in the table minus one |
| if((selector | 7) > table_limit) |
| { |
| dbg_log("Selector " + h(selector, 4) + " is outside of the " + |
| (is_gdt ? "g" : "l") + "dt limits", LOG_CPU); |
| info.is_valid = false; |
| return info; |
| } |
| |
| table_offset = table_offset + selector_offset | 0; |
| |
| if(this.paging) |
| { |
| table_offset = this.translate_address_system_read(table_offset); |
| } |
| info.table_offset = table_offset; |
| |
| info.base = this.read16(table_offset + 2 | 0) | this.read8(table_offset + 4 | 0) << 16 | |
| this.read8(table_offset + 7 | 0) << 24; |
| info.access = this.read8(table_offset + 5 | 0); |
| info.flags = this.read8(table_offset + 6 | 0) >> 4; |
| |
| info.raw0 = this.read32s(table_offset | 0); |
| info.raw1 = this.read32s(table_offset + 4 | 0); |
| |
| //this.write8(table_offset + 5 | 0, info.access | 1); |
| |
| // used if system |
| info.type = info.access & 0xF; |
| |
| info.dpl = info.access >> 5 & 3; |
| |
| info.is_system = (info.access & 0x10) === 0; |
| info.is_present = (info.access & 0x80) === 0x80; |
| info.is_executable = (info.access & 8) === 8; |
| |
| info.rw_bit = (info.access & 2) === 2; |
| info.dc_bit = (info.access & 4) === 4; |
| |
| info.is_conforming_executable = info.dc_bit && info.is_executable; |
| |
| info.size = (info.flags & 4) === 4; |
| |
| var limit = this.read16(table_offset) | |
| (this.read8(table_offset + 6 | 0) & 0xF) << 16; |
| |
| if(info.flags & 8) |
| { |
| // granularity set |
| info.effective_limit = (limit << 12 | 0xFFF) >>> 0; |
| } |
| else |
| { |
| info.effective_limit = limit; |
| } |
| |
| info.is_writable = info.rw_bit && !info.is_executable; |
| info.is_readable = info.rw_bit || !info.is_executable; |
| |
| return info; |
| }; |
| |
| /** |
| * @param {number} reg |
| * @param {number} selector |
| */ |
| CPU.prototype.switch_seg = function(reg, selector) |
| { |
| dbg_assert(reg >= 0 && reg <= 5); |
| dbg_assert(typeof selector === "number" && selector < 0x10000 && selector >= 0); |
| |
| if(!this.protected_mode || this.vm86_mode()) |
| { |
| this.sreg[reg] = selector; |
| this.segment_is_null[reg] = 0; |
| this.segment_offsets[reg] = selector << 4; |
| |
| if(reg === reg_ss) |
| { |
| this.stack_size_32 = false; |
| } |
| return; |
| } |
| |
| var info = this.lookup_segment_selector(selector); |
| |
| if(reg === reg_ss) |
| { |
| if(info.is_null) |
| { |
| dbg_log("#GP for loading 0 in SS sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(0); |
| } |
| |
| if(!info.is_valid || |
| info.is_system || |
| info.rpl !== this.cpl || |
| !info.is_writable || |
| info.dpl !== this.cpl) |
| { |
| dbg_log("#GP for loading invalid in SS sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#SS for loading non-present in SS sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_ss(selector & ~3); |
| } |
| |
| this.stack_size_32 = info.size; |
| } |
| else if(reg === reg_cs) |
| { |
| // handled by switch_cs_real_mode, far_return or far_jump |
| dbg_assert(false); |
| } |
| else |
| { |
| // es, ds, fs, gs |
| if(info.is_null) |
| { |
| //dbg_log("0 loaded in seg=" + reg + " sel=" + h(selector, 4), LOG_CPU); |
| //dbg_trace(LOG_CPU); |
| this.sreg[reg] = selector; |
| this.segment_is_null[reg] = 1; |
| return; |
| } |
| |
| if(!info.is_valid || |
| info.is_system || |
| !info.is_readable || |
| (!info.is_conforming_executable && |
| (info.rpl > info.dpl || this.cpl > info.dpl)) |
| ) { |
| dbg_log("#GP for loading invalid in seg " + reg + " sel=" + h(selector, 4), LOG_CPU); |
| this.debug.dump_state(); |
| this.debug.dump_regs(); |
| dbg_trace(LOG_CPU); |
| this.trigger_gp(selector & ~3); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NP for loading not-present in seg " + reg + " sel=" + h(selector, 4), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| this.trigger_np(selector & ~3); |
| } |
| } |
| |
| this.segment_is_null[reg] = 0; |
| this.segment_limits[reg] = info.effective_limit; |
| //this.segment_infos[reg] = 0; // TODO |
| |
| this.segment_offsets[reg] = info.base; |
| this.sreg[reg] = selector; |
| }; |
| |
| CPU.prototype.load_tr = function(selector) |
| { |
| var info = this.lookup_segment_selector(selector); |
| |
| dbg_assert(info.is_valid); |
| //dbg_log("load tr: " + h(selector, 4) + " offset=" + h(info.base >>> 0, 8) + " limit=" + h(info.effective_limit >>> 0, 8), LOG_CPU); |
| |
| if(!info.from_gdt) |
| { |
| throw this.debug.unimpl("TR can only be loaded from GDT"); |
| } |
| |
| if(info.is_null) |
| { |
| dbg_log("#GP(0) | tried to load null selector (ltr)"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(!info.is_system) |
| { |
| dbg_log("#GP | ltr: not a system entry"); |
| throw this.debug.unimpl("#GP handler (happens when running kvm-unit-test without ACPI)"); |
| } |
| |
| if(info.type !== 9 && info.type !== 1) |
| { |
| // 0xB: busy 386 TSS (GP) |
| // 0x9: 386 TSS |
| // 0x3: busy 286 TSS (GP) |
| // 0x1: 286 TSS (??) |
| dbg_log("#GP | ltr: invalid type (type = " + h(info.type) + ")"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("#NT | present bit not set (ltr)"); |
| throw this.debug.unimpl("#NT handler"); |
| } |
| |
| this.tss_size_32 = info.type === 9; |
| this.segment_offsets[reg_tr] = info.base; |
| this.segment_limits[reg_tr] = info.effective_limit; |
| this.sreg[reg_tr] = selector; |
| |
| // Mark task as busy |
| this.write8(info.table_offset + 5 | 0, this.read8(info.table_offset + 5 | 0) | 2); |
| |
| //dbg_log("tsr at " + h(info.base) + "; (" + info.effective_limit + " bytes)"); |
| }; |
| |
| CPU.prototype.load_ldt = function(selector) |
| { |
| var info = this.lookup_segment_selector(selector); |
| |
| if(info.is_null) |
| { |
| // invalid |
| this.segment_offsets[reg_ldtr] = 0; |
| this.segment_limits[reg_ldtr] = 0; |
| return; |
| } |
| |
| dbg_assert(info.is_valid); |
| |
| if(!info.from_gdt) |
| { |
| throw this.debug.unimpl("LDTR can only be loaded from GDT"); |
| } |
| |
| if(!info.is_present) |
| { |
| dbg_log("lldt: present bit not set"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(!info.is_system) |
| { |
| dbg_log("lldt: not a system entry"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| if(info.type !== 2) |
| { |
| dbg_log("lldt: invalid type (" + info.type + ")"); |
| throw this.debug.unimpl("#GP handler"); |
| } |
| |
| this.segment_offsets[reg_ldtr] = info.base; |
| this.segment_limits[reg_ldtr] = info.effective_limit; |
| this.sreg[reg_ldtr] = selector; |
| |
| //dbg_log("ldt at " + h(info.base >>> 0) + "; (" + info.effective_limit + " bytes)", LOG_CPU); |
| }; |
| |
| CPU.prototype.arpl = function(seg, r16) |
| { |
| this.flags_changed &= ~flag_zero; |
| |
| if((seg & 3) < (this.reg16[r16] & 3)) |
| { |
| this.flags |= flag_zero; |
| return seg & ~3 | this.reg16[r16] & 3; |
| } |
| else |
| { |
| this.flags &= ~flag_zero; |
| return seg; |
| } |
| }; |
| |
| CPU.prototype.lar = function(selector, original) |
| { |
| dbg_log("lar sel=" + h(selector, 4), LOG_CPU); |
| |
| /** @const */ |
| var LAR_INVALID_TYPE = 1 << 0 | 1 << 6 | 1 << 7 | 1 << 8 | 1 << 0xA | |
| 1 << 0xD | 1 << 0xE | 1 << 0xF; |
| |
| var info = this.lookup_segment_selector(selector); |
| this.flags_changed &= ~flag_zero; |
| |
| var dpl_bad = info.dpl < this.cpl || info.dpl < info.rpl; |
| |
| if(info.is_null || !info.is_valid || |
| (info.is_system ? (LAR_INVALID_TYPE >> info.type & 1) || dpl_bad : |
| !info.is_conforming_executable && dpl_bad) |
| ) { |
| this.flags &= ~flag_zero; |
| dbg_log("lar: invalid selector=" + h(selector, 4) + " is_null=" + info.is_null, LOG_CPU); |
| return original; |
| } |
| else |
| { |
| this.flags |= flag_zero; |
| return info.raw1 & 0x00FFFF00; |
| } |
| }; |
| |
| CPU.prototype.lsl = function(selector, original) |
| { |
| dbg_log("lsl sel=" + h(selector, 4), LOG_CPU); |
| |
| /** @const */ |
| var LSL_INVALID_TYPE = 1 << 0 | 1 << 4 | 1 << 5 | 1 << 6 | 1 << 8 | |
| 1 << 0xA | 1 << 0xC | 1 << 0xD | 1 << 0xE | 1 << 0xF; |
| |
| var info = this.lookup_segment_selector(selector); |
| this.flags_changed &= ~flag_zero; |
| |
| var dpl_bad = info.dpl < this.cpl || info.dpl < info.rpl; |
| |
| if(info.is_null || !info.is_valid || |
| (info.is_system ? (LSL_INVALID_TYPE >> info.type & 1) || dpl_bad : |
| !info.is_conforming_executable && dpl_bad) |
| ) { |
| this.flags &= ~flag_zero; |
| dbg_log("lsl: invalid selector=" + h(selector, 4) + " is_null=" + info.is_null, LOG_CPU); |
| return original; |
| } |
| else |
| { |
| this.flags |= flag_zero; |
| return info.effective_limit | 0; |
| } |
| |
| }; |
| |
| CPU.prototype.verr = function(selector) |
| { |
| var info = this.lookup_segment_selector(selector); |
| this.flags_changed &= ~flag_zero; |
| |
| if(info.is_null || !info.is_valid || info.is_system || !info.is_readable || |
| (!info.is_conforming_executable && (info.dpl < this.cpl || info.dpl < info.rpl))) |
| { |
| dbg_log("verr -> invalid. selector=" + h(selector, 4), LOG_CPU); |
| this.flags &= ~flag_zero; |
| } |
| else |
| { |
| dbg_log("verr -> valid. selector=" + h(selector, 4), LOG_CPU); |
| this.flags |= flag_zero; |
| } |
| }; |
| |
| CPU.prototype.verw = function(selector) |
| { |
| var info = this.lookup_segment_selector(selector); |
| this.flags_changed &= ~flag_zero; |
| |
| if(info.is_null || !info.is_valid || info.is_system || !info.is_writable || |
| info.dpl < this.cpl || info.dpl < info.rpl) |
| { |
| dbg_log("verw invalid " + " " + h(selector) + " " + info.is_null + " " + |
| !info.is_valid + " " + info.is_system + " " + !info.is_writable + " " + |
| (info.dpl < this.cpl) + " " + (info.dpl < info.rpl) + " " + LOG_CPU); |
| this.flags &= ~flag_zero; |
| } |
| else |
| { |
| dbg_log("verw valid", LOG_CPU); |
| this.flags |= flag_zero; |
| } |
| }; |
| |
| CPU.prototype.clear_tlb = function() |
| { |
| // clear tlb excluding global pages |
| this.last_virt_eip = -1; |
| this.last_virt_esp = -1; |
| |
| this.tlb_info.set(this.tlb_info_global); |
| |
| //dbg_log("page table loaded", LOG_CPU); |
| }; |
| |
| CPU.prototype.full_clear_tlb = function() |
| { |
| //dbg_log("TLB full clear", LOG_CPU); |
| |
| // clear tlb including global pages |
| var buf32 = new Int32Array(this.tlb_info_global.buffer); |
| for(var i = 0; i < (1 << 18); ) |
| { |
| buf32[i++] = buf32[i++] = buf32[i++] = buf32[i++] = 0; |
| } |
| |
| this.clear_tlb(); |
| }; |
| |
| CPU.prototype.invlpg = function(addr) |
| { |
| var page = addr >>> 12; |
| //dbg_log("invlpg: addr=" + h(addr >>> 0), LOG_CPU); |
| |
| this.tlb_info[page] = 0; |
| this.tlb_info_global[page] = 0; |
| |
| this.last_virt_eip = -1; |
| this.last_virt_esp = -1; |
| }; |
| |
| CPU.prototype.translate_address_read = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| if(this.cpl === 3) |
| { |
| return this.translate_address_user_read(addr); |
| } |
| else |
| { |
| return this.translate_address_system_read(addr); |
| } |
| }; |
| |
| CPU.prototype.translate_address_write = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| if(this.cpl === 3) |
| { |
| return this.translate_address_user_write(addr); |
| } |
| else |
| { |
| return this.translate_address_system_write(addr); |
| } |
| }; |
| |
| CPU.prototype.translate_address_user_write = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| var base = addr >>> 12; |
| |
| if(this.tlb_info[base] & TLB_USER_WRITE) |
| { |
| return this.tlb_data[base] ^ addr; |
| } |
| else |
| { |
| return this.do_page_translation(addr, 1, 1) | addr & 0xFFF; |
| } |
| }; |
| |
| CPU.prototype.translate_address_user_read = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| var base = addr >>> 12; |
| |
| if(this.tlb_info[base] & TLB_USER_READ) |
| { |
| return this.tlb_data[base] ^ addr; |
| } |
| else |
| { |
| return this.do_page_translation(addr, 0, 1) | addr & 0xFFF; |
| } |
| }; |
| |
| CPU.prototype.translate_address_system_write = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| var base = addr >>> 12; |
| |
| if(this.tlb_info[base] & TLB_SYSTEM_WRITE) |
| { |
| return this.tlb_data[base] ^ addr; |
| } |
| else |
| { |
| return this.do_page_translation(addr, 1, 0) | addr & 0xFFF; |
| } |
| }; |
| |
| CPU.prototype.translate_address_system_read = function(addr) |
| { |
| if(!this.paging) |
| { |
| return addr; |
| } |
| |
| var base = addr >>> 12; |
| |
| if(this.tlb_info[base] & TLB_SYSTEM_READ) |
| { |
| return this.tlb_data[base] ^ addr; |
| } |
| else |
| { |
| return this.do_page_translation(addr, 0, 0) | addr & 0xFFF; |
| } |
| }; |
| |
| /** |
| * @return {number} |
| */ |
| CPU.prototype.do_page_translation = function(addr, for_writing, user) |
| { |
| var page = addr >>> 12, |
| page_dir_addr = (this.cr[3] >>> 2) + (page >> 10) | 0, |
| page_dir_entry = this.mem32s[page_dir_addr], |
| high, |
| can_write = true, |
| global, |
| cachable = true, |
| allow_user = true; |
| |
| dbg_assert(addr < 0x80000000); |
| |
| if(!(page_dir_entry & 1)) |
| { |
| // to do at this place: |
| // |
| // - set cr2 = addr (which caused the page fault) |
| // - call_interrupt_vector with id 14, error code 0-7 (requires information if read or write) |
| // - prevent execution of the function that triggered this call |
| //dbg_log("#PF not present", LOG_CPU); |
| |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 0); |
| |
| // never reached as this.trigger_pagefault throws up |
| dbg_assert(false); |
| } |
| |
| if((page_dir_entry & 2) === 0) |
| { |
| can_write = false; |
| |
| if(for_writing && (user || (this.cr[0] & CR0_WP))) |
| { |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 1); |
| dbg_assert(false); |
| } |
| } |
| |
| if((page_dir_entry & 4) === 0) |
| { |
| allow_user = false; |
| |
| if(user) |
| { |
| // "Page Fault: page table accessed by non-supervisor"; |
| //dbg_log("#PF supervisor", LOG_CPU); |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 1); |
| dbg_assert(false); |
| } |
| } |
| |
| if(page_dir_entry & this.page_size_extensions) |
| { |
| // size bit is set |
| |
| // set the accessed and dirty bits |
| this.mem32s[page_dir_addr] = page_dir_entry | 0x20 | for_writing << 6; |
| |
| high = (page_dir_entry & 0xFFC00000) | (addr & 0x3FF000); |
| global = page_dir_entry & 0x100; |
| } |
| else |
| { |
| var page_table_addr = ((page_dir_entry & 0xFFFFF000) >>> 2) + (page & 0x3FF) | 0, |
| page_table_entry = this.mem32s[page_table_addr]; |
| |
| if((page_table_entry & 1) === 0) |
| { |
| //dbg_log("#PF not present table", LOG_CPU); |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 0); |
| dbg_assert(false); |
| } |
| |
| if((page_table_entry & 2) === 0) |
| { |
| can_write = false; |
| |
| if(for_writing && (user || (this.cr[0] & CR0_WP))) |
| { |
| //dbg_log("#PF not writable page", LOG_CPU); |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 1); |
| dbg_assert(false); |
| } |
| } |
| |
| if((page_table_entry & 4) === 0) |
| { |
| allow_user = false; |
| |
| if(user) |
| { |
| //dbg_log("#PF not supervisor page", LOG_CPU); |
| this.cr[2] = addr; |
| this.trigger_pagefault(for_writing, user, 1); |
| dbg_assert(false); |
| } |
| } |
| |
| // set the accessed and dirty bits |
| this.write_aligned32(page_dir_addr, page_dir_entry | 0x20); |
| this.write_aligned32(page_table_addr, page_table_entry | 0x20 | for_writing << 6); |
| |
| high = page_table_entry & 0xFFFFF000; |
| global = page_table_entry & 0x100; |
| } |
| |
| this.tlb_data[page] = high ^ page << 12; |
| |
| var allowed_flag; |
| |
| if(allow_user) |
| { |
| if(can_write) |
| { |
| allowed_flag = TLB_SYSTEM_READ | TLB_SYSTEM_WRITE | TLB_USER_READ | TLB_USER_WRITE; |
| } |
| else |
| { |
| // TODO: Consider if cr0.wp is not set |
| allowed_flag = TLB_SYSTEM_READ | TLB_USER_READ; |
| } |
| } |
| else |
| { |
| if(can_write) |
| { |
| allowed_flag = TLB_SYSTEM_READ | TLB_SYSTEM_WRITE; |
| } |
| else |
| { |
| allowed_flag = TLB_SYSTEM_READ; |
| } |
| } |
| |
| this.tlb_info[page] = allowed_flag; |
| |
| if(global && (this.cr[4] & CR4_PGE)) |
| { |
| this.tlb_info_global[page] = allowed_flag; |
| } |
| |
| return high; |
| }; |
| |
| CPU.prototype.writable_or_pagefault = function(addr, size) |
| { |
| dbg_assert(size < 0x1000, "not supported yet"); |
| dbg_assert(size > 0); |
| |
| if(!this.paging) |
| { |
| return; |
| } |
| |
| var user = this.cpl === 3 ? 1 : 0, |
| mask = user ? TLB_USER_WRITE : TLB_SYSTEM_WRITE, |
| page = addr >>> 12; |
| |
| if((this.tlb_info[page] & mask) === 0) |
| { |
| this.do_page_translation(addr, 1, user); |
| } |
| |
| if((addr & 0xFFF) + size - 1 >= 0x1000) |
| { |
| if((this.tlb_info[page + 1 | 0] & mask) === 0) |
| { |
| this.do_page_translation(addr + size - 1 | 0, 1, user); |
| } |
| } |
| }; |
| |
| CPU.prototype.trigger_pagefault = function(write, user, present) |
| { |
| if(LOG_PAGE_FAULTS) |
| { |
| dbg_log("page fault w=" + write + " u=" + user + " p=" + present + |
| " eip=" + h(this.previous_ip >>> 0, 8) + |
| " cr2=" + h(this.cr[2] >>> 0, 8), LOG_CPU); |
| dbg_trace(LOG_CPU); |
| } |
| |
| if(this.page_fault) |
| { |
| dbg_trace(LOG_CPU); |
| throw this.debug.unimpl("Double fault"); |
| } |
| |
| // invalidate tlb entry |
| var page = this.cr[2] >>> 12; |
| this.tlb_info[page] = 0; |
| this.tlb_info_global[page] = 0; |
| |
| this.instruction_pointer = this.previous_ip; |
| this.page_fault = true; |
| this.call_interrupt_vector(14, false, user << 2 | write << 1 | present); |
| |
| throw MAGIC_CPU_EXCEPTION; |
| }; |
| |
| CPU.prototype.is_osize_32 = function() |
| { |
| return this.is_32 !== ((this.prefixes & PREFIX_MASK_OPSIZE) === PREFIX_MASK_OPSIZE); |
| }; |
| |
| CPU.prototype.is_asize_32 = function() |
| { |
| return this.is_32 !== ((this.prefixes & PREFIX_MASK_ADDRSIZE) === PREFIX_MASK_ADDRSIZE); |
| }; |
| |
| CPU.prototype.get_reg_asize = function(reg) |
| { |
| dbg_assert(reg === reg_ecx || reg === reg_esi || reg === reg_edi); |
| var r = this.reg32s[reg]; |
| |
| if(this.is_asize_32()) |
| { |
| return r; |
| } |
| else |
| { |
| return r & 0xFFFF; |
| } |
| }; |
| |
| CPU.prototype.set_ecx_asize = function(value) |
| { |
| if(this.is_asize_32()) |
| { |
| this.reg32s[reg_ecx] = value; |
| } |
| else |
| { |
| this.reg16[reg_cx] = value; |
| } |
| }; |
| |
| CPU.prototype.add_reg_asize = function(reg, value) |
| { |
| dbg_assert(reg === reg_ecx || reg === reg_esi || reg === reg_edi); |
| if(this.is_asize_32()) |
| { |
| this.reg32s[reg] += value; |
| } |
| else |
| { |
| this.reg16[reg << 1] += value; |
| } |
| }; |
| |
| CPU.prototype.decr_ecx_asize = function() |
| { |
| return this.is_asize_32() ? --this.reg32s[reg_ecx] : --this.reg16[reg_cx]; |
| }; |
| |
| // Closure Compiler's way of exporting |
| if(typeof window !== "undefined") |
| { |
| window["CPU"] = CPU; |
| } |
| else if(typeof module !== "undefined" && typeof module.exports !== "undefined") |
| { |
| module.exports["CPU"] = CPU; |
| } |
| else if(typeof importScripts === "function") |
| { |
| self["CPU"] = CPU; |
| } |