| "use strict"; |
| |
| var |
| /** @const */ |
| CDROM_SECTOR_SIZE = 2048, |
| /** @const */ |
| HD_SECTOR_SIZE = 512; |
| |
| var /** @const */ |
| IDE_CALLBACK_NONE = 0, |
| |
| /** @const */ |
| IDE_CALLBACK_WRITE = 1, |
| |
| /** @const */ |
| IDE_CALLBACK_ATAPI = 2; |
| |
| /** @constructor */ |
| function IDEDevice(cpu, buffer, is_cd, nr, bus) |
| { |
| /** @const */ |
| this.bus = bus; |
| |
| // gets set via PCI in seabios, likely doesn't matter |
| if(nr === 0) |
| { |
| this.ata_port = 0x1F0; |
| this.irq = 14; |
| |
| this.pci_id = 0x1E << 3; |
| } |
| else |
| { |
| this.ata_port = 0x1F0; |
| this.irq = 14; |
| |
| this.pci_id = 0x1F << 3; |
| } |
| |
| /** @const */ |
| this.nr = nr; |
| |
| // alternate status, starting at 3f4/374 |
| /** @type {number} */ |
| this.ata_port_high = this.ata_port | 0x204; |
| |
| /** @type {number} */ |
| this.master_port = 0xC000; |
| |
| /** @const */ |
| this.pic = cpu.devices.pic; |
| |
| /** @const */ |
| this.memory = cpu.memory; |
| |
| this.buffer = buffer; |
| |
| /** @type {number} */ |
| this.sector_size = is_cd ? CDROM_SECTOR_SIZE : HD_SECTOR_SIZE; |
| |
| /** @type {boolean} */ |
| this.is_atapi = is_cd; |
| |
| /** @type {number} */ |
| this.sector_count = 0; |
| |
| /** @type {number} */ |
| this.head_count = 0; |
| |
| /** @type {number} */ |
| this.sectors_per_track = 0; |
| |
| /** @type {number} */ |
| this.cylinder_count = 0; |
| |
| if(this.buffer) |
| { |
| this.sector_count = this.buffer.byteLength / this.sector_size; |
| |
| if(this.sector_count !== (this.sector_count | 0)) |
| { |
| dbg_log("Warning: Disk size not aligned with sector size", LOG_DISK); |
| this.sector_count = Math.ceil(this.sector_count); |
| } |
| |
| if(is_cd) |
| { |
| this.head_count = 1; |
| this.sectors_per_track = 0; |
| } |
| else |
| { |
| this.head_count = 255; |
| this.sectors_per_track = 63; |
| } |
| |
| this.cylinder_count = this.sector_count / (this.head_count + 1) / (this.sectors_per_track + 1); |
| |
| if(this.cylinder_count !== (this.cylinder_count | 0)) |
| { |
| dbg_log("Warning: Rounding up cylinder count. Choose different head number", LOG_DISK); |
| this.cylinder_count = Math.ceil(this.cylinder_count); |
| } |
| } |
| |
| /** @const */ |
| this.stats = { |
| sectors_read: 0, |
| sectors_written: 0, |
| bytes_read: 0, |
| bytes_written: 0, |
| loading: false, |
| }; |
| |
| this.pci_space = [ |
| 0x86, 0x80, 0x20, 0x3a, 0x05, 0x00, 0xa0, 0x02, 0x00, 0x8f, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, |
| this.ata_port & 0xFF | 1, this.ata_port >> 8, 0x00, 0x00, |
| this.ata_port_high & 0xFF | 1, this.ata_port_high >> 8, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, |
| this.master_port & 0xFF | 1, this.master_port >> 8, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, |
| 0x43, 0x10, 0xd4, 0x82, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, this.irq, 0x01, 0x00, 0x00, |
| |
| // 0x40 |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| // 0x80 |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| ]; |
| this.pci_bars = [ |
| { |
| size: 8, |
| }, |
| { |
| size: 4, |
| }, |
| false, |
| false, |
| { |
| size: 0x10, |
| }, |
| ]; |
| |
| // 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 |
| //0x86, 0x80, 0x20, 0x3a, 0x05, 0x00, 0xb0, 0x02, 0x00, 0x8f, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, |
| //0x01, 0x90, 0x00, 0x00, 0x01, 0x8c, 0x00, 0x00, 0x81, 0x88, 0x00, 0x00, 0x01, 0x88, 0x00, 0x00, |
| //0x81, 0x84, 0x00, 0x00, 0x01, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x43, 0x10, 0xd4, 0x82, |
| //0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x02, 0x00, 0x00, |
| cpu.devices.pci.register_device(this); |
| |
| // status |
| cpu.io.register_read(this.ata_port | 7, this, this.read_status); |
| cpu.io.register_read(this.ata_port_high | 2, this, this.read_status); |
| |
| cpu.io.register_write(this.ata_port | 7, this, this.write_control); |
| cpu.io.register_write(this.ata_port_high | 2, this, this.write_control); |
| |
| /** @type {number} */ |
| this.device_control = 2; |
| /** @type {number} */ |
| this.last_drive = 0xFF; |
| /** @type {number} */ |
| this.data_pointer = 0; |
| this.pio_data = new Uint8Array(0); |
| /** @type {number} */ |
| this.is_lba = 0; |
| /** @type {number} */ |
| this.bytecount = 0; |
| /** @type {number} */ |
| this.sector = 0; |
| /** @type {number} */ |
| this.lba_count = 0; |
| /** @type {number} */ |
| this.cylinder_low = 0; |
| /** @type {number} */ |
| this.cylinder_high = 0; |
| /** @type {number} */ |
| this.head = 0; |
| /** @type {number} */ |
| this.drive_head = 0; |
| /** @type {number} */ |
| this.status = 0x50; |
| /** @type {number} */ |
| this.sectors_per_drq = 1; |
| |
| /** @type {number} */ |
| this.write_dest = 0; |
| |
| /** @type {number} */ |
| this.data_port_count = 0; |
| /** @type {number} */ |
| this.data_port_current = 0; |
| this.data_port_buffer = new Uint8Array(0); |
| |
| this.data_port_callback = IDE_CALLBACK_NONE; |
| |
| /** @type {number} */ |
| this.next_status = -1; |
| |
| /** @type {number} */ |
| this.prdt_addr = 0; |
| /** @type {number} */ |
| this.dma_status = 0; |
| |
| cpu.io.register_read(this.ata_port | 0, this, this.read_data_port8, this.read_data_port16, this.read_data_port32); |
| cpu.io.register_read(this.ata_port | 1, this, this.read_lba_port); |
| cpu.io.register_read(this.ata_port | 2, this, this.read_bytecount_port); |
| cpu.io.register_read(this.ata_port | 3, this, this.read_sector_port); |
| |
| cpu.io.register_read(this.ata_port | 4, this, function() |
| { |
| dbg_log("Read 1F4: " + h(this.cylinder_low & 0xFF), LOG_DISK); |
| return this.cylinder_low & 0xFF; |
| }); |
| cpu.io.register_read(this.ata_port | 5, this, function() |
| { |
| dbg_log("Read 1F5: " + h(this.cylinder_high & 0xFF), LOG_DISK); |
| return this.cylinder_high & 0xFF; |
| }); |
| cpu.io.register_read(this.ata_port | 6, this, function() |
| { |
| dbg_log("Read 1F6", LOG_DISK); |
| return this.drive_head; |
| }); |
| |
| |
| cpu.io.register_write(this.ata_port | 0, this, this.write_data_port8, this.write_data_port16, this.write_data_port32); |
| cpu.io.register_write(this.ata_port | 1, this, this.write_lba_port); |
| cpu.io.register_write(this.ata_port | 2, this, this.write_bytecount_port); |
| cpu.io.register_write(this.ata_port | 3, this, this.write_sector_port); |
| |
| cpu.io.register_write(this.ata_port | 4, this, function(data) |
| { |
| dbg_log("1F4/sector low: " + h(data), LOG_DISK); |
| this.cylinder_low = (this.cylinder_low << 8 | data) & 0xFFFF; |
| }); |
| cpu.io.register_write(this.ata_port | 5, this, function(data) |
| { |
| dbg_log("1F5/sector high: " + h(data), LOG_DISK); |
| this.cylinder_high = (this.cylinder_high << 8 | data) & 0xFFFF; |
| }); |
| cpu.io.register_write(this.ata_port | 6, this, function(data) |
| { |
| var slave = data & 0x10, |
| mode = data & 0xE0, |
| low = data & 0xF; |
| |
| dbg_log("1F6/drive: " + h(data, 2), LOG_DISK); |
| |
| if(slave) |
| { |
| dbg_log("Slave", LOG_DISK); |
| return; |
| } |
| |
| if((mode & 0x40) === 0) |
| { |
| // chs mode |
| //dbg_log("CHS mode: Unimplemented", LOG_DISK); |
| //return; |
| } |
| |
| this.drive_head = data; |
| this.is_lba = data >> 6 & 1; |
| this.head = data & 0xF; |
| this.last_drive = data; |
| }); |
| |
| cpu.io.register_write(this.ata_port | 7, this, this.ata_command); |
| |
| cpu.io.register_read(this.master_port | 4, this, undefined, undefined, this.dma_read_addr); |
| cpu.io.register_write(this.master_port | 4, this, undefined, undefined, this.dma_set_addr); |
| |
| cpu.io.register_read(this.master_port, this, this.dma_read_command8, undefined, this.dma_read_command); |
| cpu.io.register_write(this.master_port, this, this.dma_write_command8, undefined, this.dma_write_command); |
| |
| cpu.io.register_read(this.master_port | 2, this, this.dma_read_status); |
| cpu.io.register_write(this.master_port | 2, this, this.dma_write_status); |
| |
| /** @const */ |
| this._state_skip = [ |
| this.memory, |
| this.pic, |
| this.stats, |
| this.buffer, |
| this.bus, |
| ]; |
| } |
| |
| IDEDevice.prototype.do_callback = function() |
| { |
| switch(this.data_port_callback) |
| { |
| case IDE_CALLBACK_NONE: |
| break; |
| |
| case IDE_CALLBACK_WRITE: |
| this.do_write(); |
| break; |
| |
| case IDE_CALLBACK_ATAPI: |
| this.atapi_handle(); |
| break; |
| |
| default: |
| dbg_assert(false, "Invalid IDE callback: " + this.data_port_callback); |
| } |
| }; |
| |
| |
| IDEDevice.prototype.push_irq = function() |
| { |
| if((this.device_control & 2) === 0) |
| { |
| dbg_log("push irq", LOG_DISK); |
| |
| this.dma_status |= 4; |
| this.pic.push_irq(this.irq); |
| } |
| }; |
| |
| IDEDevice.prototype.ata_command = function(cmd) |
| { |
| dbg_log("ATA Command: " + h(cmd), LOG_DISK); |
| |
| switch(cmd) |
| { |
| case 0x00: |
| // NOP |
| this.push_irq(); |
| this.status = 0x50; |
| break; |
| |
| case 0x08: |
| dbg_log("ATA device reset", LOG_DISK); |
| this.data_pointer = 0; |
| this.pio_data = new Uint8Array(0); |
| this.status = 0x50; |
| |
| this.push_irq(); |
| break; |
| |
| case 0x10: |
| // obsolete |
| dbg_log("ATA cmd 10", LOG_DISK); |
| this.push_irq(); |
| break; |
| |
| case 0x27: |
| // read native max address ext - read the actual size of the HD |
| // https://en.wikipedia.org/wiki/Host_protected_area |
| dbg_log("ATA cmd 27", LOG_DISK); |
| this.push_irq(); |
| this.pio_data = new Uint8Array([ |
| 0, 0, // error |
| 0, 0, // count |
| |
| // result |
| this.buffer.byteLength & 0xff, |
| this.buffer.byteLength >> 8 & 0xff, |
| this.buffer.byteLength >> 16 & 0xff, |
| this.buffer.byteLength >> 24 & 0xff, |
| 0, 0, |
| |
| 0, 0, |
| ]); |
| this.status = 0x58; |
| break; |
| |
| case 0x20: |
| case 0x29: |
| case 0x24: |
| case 0xC4: |
| // 0x20 read sectors |
| // 0x24 read sectors ext |
| // 0xC4 read multiple |
| // 0x29 read multiple ext |
| this.ata_read_sectors(cmd); |
| break; |
| |
| case 0x30: |
| case 0x34: |
| case 0x39: |
| // 0x30 write sectors |
| // 0x34 write sectors ext |
| // 0x39 write multiple ext |
| this.ata_write(cmd); |
| break; |
| |
| case 0x90: |
| // EXECUTE DEVICE DIAGNOSTIC |
| dbg_log("ATA cmd 90", LOG_DISK); |
| this.push_irq(); |
| this.lba_count = 0x101; |
| this.status = 0x50; |
| break; |
| |
| case 0x91: |
| // INITIALIZE DEVICE PARAMETERS |
| dbg_log("ATA cmd 91", LOG_DISK); |
| this.push_irq(); |
| break; |
| |
| case 0xA0: |
| if(this.is_atapi) |
| { |
| // ATA_CMD_PACKET |
| this.status = 0x58; |
| this.allocate_in_buffer(12); |
| this.data_port_callback = IDE_CALLBACK_ATAPI; |
| |
| this.bytecount = 1; |
| this.push_irq(); |
| } |
| break; |
| |
| case 0xA1: |
| dbg_log("ATA identify packet device", LOG_DISK); |
| |
| if(this.is_atapi) |
| { |
| this.create_identify_packet(); |
| this.status = 0x58; |
| |
| this.push_irq(); |
| } |
| else |
| { |
| this.status = 0x50; |
| this.push_irq(); |
| } |
| break; |
| |
| case 0xC6: |
| // SET MULTIPLE MODE |
| dbg_log("ATA cmd C6", LOG_DISK); |
| |
| // Logical sectors per DRQ Block in word 1 |
| dbg_log("Logical sectors per DRQ Block: " + h(this.bytecount), LOG_DISK); |
| this.sectors_per_drq = this.bytecount; |
| |
| this.push_irq(); |
| break; |
| |
| case 0xC8: |
| // 0xC8 read dma |
| this.ata_read_sectors_dma(cmd); |
| break; |
| |
| case 0xCA: |
| // write dma |
| this.ata_write_dma(cmd); |
| break; |
| |
| case 0xE1: |
| dbg_log("ATA idle immediate", LOG_DISK); |
| this.push_irq(); |
| break; |
| |
| case 0xEC: |
| dbg_log("ATA identify device", LOG_DISK); |
| // identify device |
| |
| if(this.is_atapi) |
| { |
| return; |
| } |
| |
| this.create_identify_packet(); |
| this.status = 0x58; |
| |
| this.push_irq(); |
| break; |
| |
| case 0xEA: |
| // FLUSH CACHE EXT |
| dbg_log("ATA cmd EA", LOG_DISK); |
| this.push_irq(); |
| break; |
| |
| case 0xEF: |
| // SET FEATURES |
| dbg_log("ATA cmd EF", LOG_DISK); |
| |
| this.push_irq(); |
| break; |
| |
| default: |
| dbg_log("New ATA cmd on 1F7: " + h(cmd), LOG_DISK); |
| |
| // abort bit set |
| this.lba_count = 4; |
| } |
| }; |
| |
| IDEDevice.prototype.atapi_handle = function() |
| { |
| dbg_log("ATAPI Command: " + h(this.data_port_buffer[0]), LOG_DISK); |
| |
| this.bytecount = 2; |
| |
| switch(this.data_port_buffer[0]) |
| { |
| case 0x00: |
| // test unit ready |
| this.status = 0x40; |
| this.cylinder_low = 8; |
| this.cylinder_high = 0; |
| this.push_irq(); |
| break; |
| |
| case 0x03: |
| // request sense |
| this.pio_data = new Uint8Array(Math.min(this.data_port_buffer[4], 15)); |
| this.status = 0x58; |
| |
| this.pio_data[0] = 0x80 | 0x70; |
| this.pio_data[7] = 8; |
| |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.cylinder_low = 8; |
| this.cylinder_high = 0; |
| |
| this.push_irq(); |
| break; |
| |
| case 0x12: |
| // inquiry |
| this.pio_data = new Uint8Array(Math.min(this.data_port_buffer[4], 36)); |
| this.status = 0x58; |
| |
| // http://www.t10.org/ftp/x3t9.2/document.87/87-106r0.txt |
| this.pio_data.set([ |
| 0x05, 0x80, 0x01, 0x31, |
| 0, 0, 0, 0, |
| |
| // 8 |
| 0x53, 0x4F, 0x4E, 0x59, |
| 0x20, 0x20, 0x20, 0x20, |
| |
| // 16 |
| 0x43, 0x44, 0x2D, 0x52, |
| 0x4F, 0x4D, 0x20, 0x43, |
| 0x44, 0x55, 0x2D, 0x31, |
| 0x30, 0x30, 0x30, 0x20, |
| |
| // 32 |
| 0x31, 0x2E, 0x31, 0x61, |
| ]); |
| |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.push_irq(); |
| break; |
| |
| case 0x1E: |
| // prevent/allow medium removal |
| this.pio_data = new Uint8Array(0); |
| this.status = 0x50; |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.push_irq(); |
| break; |
| |
| case 0x25: |
| // read capacity |
| this.pio_data = new Uint8Array([ |
| this.sector_count >> 24 & 0xff, |
| this.sector_count >> 16 & 0xff, |
| this.sector_count >> 8 & 0xff, |
| this.sector_count & 0xff, |
| 0, |
| 0, |
| this.sector_size >> 8 & 0xff, |
| this.sector_size & 0xff, |
| ]); |
| this.status = 0x58; |
| |
| this.data_pointer = 0; |
| |
| this.bytecount = 2; |
| this.cylinder_low = 8; |
| this.cylinder_high = 0; |
| |
| this.push_irq(); |
| break; |
| |
| case 0x28: |
| // read |
| if(this.lba_count & 1) |
| { |
| this.atapi_read_dma(this.data_port_buffer); |
| } |
| else |
| { |
| this.atapi_read(this.data_port_buffer); |
| } |
| break; |
| |
| case 0x43: |
| // read header |
| this.pio_data = new Uint8Array(2048); |
| this.pio_data[0] = 0; |
| this.pio_data[1] = 10; |
| this.pio_data[2] = 1; |
| this.pio_data[3] = 1; |
| this.status = 0x58; |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.cylinder_high = 8; |
| this.cylinder_low = 0; |
| this.push_irq(); |
| break; |
| |
| case 0x46: |
| // get configuration |
| this.pio_data = new Uint8Array(this.data_port_buffer[8] | this.data_port_buffer[7] << 8); |
| this.status = 0x58; |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.push_irq(); |
| break; |
| |
| case 0x4A: |
| // get event status notification |
| this.pio_data = new Uint8Array(this.data_port_buffer[8] | this.data_port_buffer[7] << 8); |
| this.status = 0x58; |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.push_irq(); |
| break; |
| |
| case 0x51: |
| // read disk information |
| this.pio_data = new Uint8Array(0); |
| this.status = 0x50; |
| this.data_pointer = 0; |
| this.bytecount = 2; |
| this.push_irq(); |
| break; |
| |
| case 0x5A: |
| // mode sense |
| this.push_irq(); |
| this.status = 0x50; |
| break; |
| |
| default: |
| this.status = 0x50; |
| dbg_log("Unimplemented ATAPI command: " + h(this.data_port_buffer[0]), LOG_DISK); |
| } |
| }; |
| |
| IDEDevice.prototype.do_write = function() |
| { |
| this.status = 0x50; |
| |
| var data = this.data_port_buffer.subarray(0, this.data_port_count); |
| |
| this.buffer.set(this.write_dest, data, function() |
| { |
| this.push_irq(); |
| }.bind(this)); |
| |
| this.report_write(this.data_port_count); |
| }; |
| |
| IDEDevice.prototype.read_status = function() |
| { |
| var ret = this.status; |
| dbg_log("ATA read status: " + h(this.status), LOG_DISK); |
| |
| if(this.next_status >= 0) |
| { |
| this.status = this.next_status; |
| this.next_status = -1; |
| } |
| |
| return ret; |
| }; |
| |
| IDEDevice.prototype.write_control = function(data) |
| { |
| dbg_log("device control: " + h(data), LOG_DISK); |
| this.device_control = data; |
| |
| if(data & 4) |
| { |
| dbg_log("Reset via control port", LOG_DISK); |
| |
| // reset |
| if(this.is_atapi) |
| { |
| this.status = 0x50 | 1; |
| this.bytecount = 1; |
| this.lba_count = 1; |
| this.sector = 1; // lba_low |
| this.cylinder_low = 0x14; // lba_mid |
| this.cylinder_high = 0xeb; // lba_high |
| } |
| else |
| { |
| this.status = 0x50 | 1; |
| this.bytecount = 1; |
| this.lba_count = 1; |
| this.sector = 1; // lba_low |
| this.cylinder_low = 0x3c; // lba_mid |
| this.cylinder_high = 0xc3; // lba_high |
| } |
| } |
| }; |
| |
| IDEDevice.prototype.allocate_in_buffer = function(size) |
| { |
| // reuse old buffer if it's smaller or the same size |
| if(size > this.data_port_buffer.length) |
| { |
| this.data_port_buffer = new Uint8Array(size); |
| } |
| |
| this.data_port_count = size; |
| this.data_port_current = 0; |
| }; |
| |
| IDEDevice.prototype.atapi_read = function(cmd) |
| { |
| // Note: Big Endian |
| var lba = cmd[2] << 24 | cmd[3] << 16 | cmd[4] << 8 | cmd[5], |
| count = cmd[7] << 8 | cmd[8], |
| flags = cmd[1], |
| byte_count = count * this.sector_size, |
| //transfered_ata_blocks = Math.min(this.bytecount / 512, this.cylinder_low << 8 | this.cylinder_high), |
| max_drq_size = (this.cylinder_high & 0xFF) << 8 | this.cylinder_low & 0xFF, |
| transfered_ata_blocks, |
| start = lba * this.sector_size; |
| |
| dbg_log("CD read lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count) + |
| " flags=" + h(flags), LOG_CD); |
| |
| if(!max_drq_size) |
| { |
| max_drq_size = 0x8000; |
| } |
| |
| transfered_ata_blocks = Math.min(byte_count, max_drq_size); |
| |
| this.cylinder_low = transfered_ata_blocks & 0xFF; |
| this.cylinder_high = transfered_ata_blocks >> 8 & 0xFF; |
| |
| if(start >= this.buffer.byteLength) |
| { |
| dbg_log("CD read: Outside of disk end=" + h(start + byte_count) + |
| " size=" + h(this.buffer.byteLength), LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| } |
| else |
| { |
| byte_count = Math.min(byte_count, this.buffer.byteLength - start); |
| this.status = 0x80; |
| this.report_read_start(); |
| |
| this.buffer.get(start, byte_count, function(data) |
| { |
| this.pio_data = data; |
| this.status = 0x58; |
| |
| //this.cylinder_low = 0; |
| //this.cylinder_high = 8; |
| |
| this.data_pointer = 0; |
| this.push_irq(); |
| |
| this.report_read_end(byte_count); |
| }.bind(this)); |
| } |
| }; |
| |
| IDEDevice.prototype.atapi_read_dma = function(cmd) |
| { |
| // Note: Big Endian |
| var lba = cmd[2] << 24 | cmd[3] << 16 | cmd[4] << 8 | cmd[5], |
| count = cmd[7] << 8 | cmd[8], |
| flags = cmd[1], |
| byte_count = count * this.sector_size, |
| start = lba * this.sector_size; |
| |
| dbg_log("CD read DMA lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count) + |
| " flags=" + h(flags), LOG_CD); |
| |
| |
| if(start >= this.buffer.byteLength) |
| { |
| dbg_log("CD read: Outside of disk end=" + h(start + byte_count) + |
| " size=" + h(this.buffer.byteLength), LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| } |
| else |
| { |
| byte_count = Math.min(byte_count, this.buffer.byteLength - start); |
| this.status = 0x80; |
| this.report_read_start(); |
| |
| this.buffer.get(start, byte_count, function(data) |
| { |
| var prdt_start = this.prdt_addr, |
| offset = 0; |
| |
| do { |
| var addr = this.memory.read32s(prdt_start), |
| count = this.memory.read16(prdt_start + 4), |
| end = this.memory.read8(prdt_start + 7) & 0x80; |
| |
| if(!count) |
| { |
| count = 0x10000; |
| } |
| |
| dbg_log("dma read dest=" + h(addr) + " count=" + h(count), LOG_DISK); |
| this.memory.write_blob(data.subarray(offset, offset + count), addr); |
| |
| offset += count; |
| prdt_start += 8; |
| } |
| while(!end); |
| |
| this.status = 0x50; |
| this.dma_status &= ~2 & ~1; |
| this.dma_status |= 4; |
| |
| this.push_irq(); |
| |
| this.report_read_end(byte_count); |
| }.bind(this)); |
| } |
| }; |
| |
| IDEDevice.prototype.read_data_port8 = function() |
| { |
| return this.read_data(); |
| }; |
| |
| IDEDevice.prototype.read_data_port16 = function() |
| { |
| return this.read_data() | this.read_data() << 8; |
| }; |
| |
| IDEDevice.prototype.read_data_port32 = function() |
| { |
| return this.read_data() | this.read_data() << 8 | |
| this.read_data() << 16 | this.read_data() << 24; |
| }; |
| |
| IDEDevice.prototype.read_lba_port = function() |
| { |
| dbg_log("Read lba_count: " + h(this.lba_count & 0xFF), LOG_DISK); |
| return this.lba_count & 0xFF; |
| }; |
| |
| IDEDevice.prototype.read_bytecount_port = function() |
| { |
| dbg_log("Read bytecount: " + h(this.bytecount & 0xFF), LOG_DISK); |
| return this.bytecount & 0xFF; |
| }; |
| |
| IDEDevice.prototype.read_sector_port = function() |
| { |
| dbg_log("Read sector: " + h(this.sector & 0xFF), LOG_DISK); |
| return this.sector & 0xFF; |
| }; |
| |
| IDEDevice.prototype.read_data = function() |
| { |
| if(this.data_pointer < this.pio_data.length) |
| { |
| if((this.data_pointer + 1) % (this.sectors_per_drq * 512) === 0 || |
| this.data_pointer + 1 === this.pio_data.length) |
| { |
| dbg_log("ATA IRQ", LOG_DISK); |
| this.push_irq(); |
| } |
| |
| if(this.cylinder_low) |
| { |
| this.cylinder_low--; |
| } |
| else |
| { |
| if(this.cylinder_high) |
| { |
| this.cylinder_high--; |
| this.cylinder_low = 0xFF; |
| } |
| } |
| |
| if(!this.cylinder_low && !this.cylinder_high) |
| { |
| var remaining = this.pio_data.length - this.data_pointer - 1; |
| dbg_log("reset to " + h(remaining), LOG_DISK); |
| |
| if(remaining >= 0x10000) |
| { |
| this.cylinder_high = 0xF0; |
| this.cylinder_low = 0; |
| } |
| else |
| { |
| this.cylinder_high = remaining >> 8; |
| this.cylinder_low = remaining; |
| } |
| |
| } |
| |
| if(this.data_pointer + 1 >= this.pio_data.length) |
| { |
| this.status = 0x50; |
| //this.bytecount = 3; |
| } |
| |
| if((this.data_pointer + 1 & 255) === 0) |
| { |
| dbg_log("Read 1F0: " + h(this.pio_data[this.data_pointer], 2) + |
| " cur=" + h(this.data_pointer) + |
| " cnt=" + h(this.pio_data.length), LOG_DISK); |
| } |
| |
| return this.pio_data[this.data_pointer++]; |
| } |
| else |
| { |
| dbg_log("Read 1F0: empty", LOG_DISK); |
| |
| this.data_pointer++; |
| return 0; |
| } |
| }; |
| |
| IDEDevice.prototype.write_data_port8 = function(data) |
| { |
| if(this.data_port_current >= this.data_port_count) |
| { |
| dbg_log("Redundant write to data port: " + h(data) + " count=" + h(this.data_port_count) + |
| " cur=" + h(this.data_port_current), LOG_DISK); |
| } |
| else |
| { |
| if((this.data_port_current + 1 & 255) === 0 || this.data_port_count < 20) |
| { |
| dbg_log("Data port: " + h(data) + " count=" + h(this.data_port_count) + |
| " cur=" + h(this.data_port_current), LOG_DISK); |
| } |
| |
| this.data_port_buffer[this.data_port_current++] = data; |
| |
| if((this.data_port_current % (this.sectors_per_drq * 512)) === 0) |
| { |
| dbg_log("ATA IRQ", LOG_DISK); |
| this.push_irq(); |
| } |
| |
| if(this.data_port_current === this.data_port_count) |
| { |
| this.do_callback(); |
| } |
| } |
| }; |
| |
| IDEDevice.prototype.write_data_port16 = function(data) |
| { |
| this.write_data_port8(data & 0xFF); |
| this.write_data_port8(data >> 8 & 0xFF); |
| }; |
| |
| IDEDevice.prototype.write_data_port32 = function(data) |
| { |
| this.write_data_port8(data & 0xFF); |
| this.write_data_port8(data >> 8 & 0xFF); |
| this.write_data_port8(data >> 16 & 0xFF); |
| this.write_data_port8(data >> 24 & 0xFF); |
| }; |
| |
| IDEDevice.prototype.write_lba_port = function(data) |
| { |
| dbg_log("1F1/lba_count: " + h(data), LOG_DISK); |
| this.lba_count = (this.lba_count << 8 | data) & 0xFFFF; |
| }; |
| |
| IDEDevice.prototype.write_bytecount_port = function(data) |
| { |
| dbg_log("1F2/bytecount: " + h(data), LOG_DISK); |
| this.bytecount = (this.bytecount << 8 | data) & 0xFFFF; |
| }; |
| |
| IDEDevice.prototype.write_sector_port = function(data) |
| { |
| dbg_log("1F3/sector: " + h(data), LOG_DISK); |
| this.sector = (this.sector << 8 | data) & 0xFFFF; |
| }; |
| |
| IDEDevice.prototype.ata_read_sectors = function(cmd) |
| { |
| if(cmd === 0x20 || cmd === 0xC4) |
| { |
| // read sectors |
| var count = this.bytecount & 0xff, |
| lba = this.is_lba ? this.get_lba28() : this.get_chs(); |
| |
| if(count === 0) |
| count = 0x100; |
| } |
| else if(cmd === 0x24 || cmd === 0x29) |
| { |
| // read sectors ext |
| var count = this.bytecount, |
| lba = this.get_lba48(); |
| |
| if(count === 0) |
| count = 0x10000; |
| } |
| else |
| { |
| dbg_assert(false); |
| return; |
| } |
| |
| var |
| byte_count = count * this.sector_size, |
| start = lba * this.sector_size; |
| |
| |
| dbg_log("ATA read lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count), LOG_DISK); |
| |
| this.cylinder_low += count; |
| |
| if(start + byte_count > this.buffer.byteLength) |
| { |
| dbg_log("ATA read: Outside of disk", LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| } |
| else |
| { |
| //this.status = 0xFF & ~8; |
| this.status = 0x80; |
| this.report_read_start(); |
| |
| this.buffer.get(start, byte_count, function(data) |
| { |
| this.pio_data = data; |
| this.status = 0x58; |
| this.data_pointer = 0; |
| |
| this.push_irq(); |
| |
| this.report_read_end(byte_count); |
| }.bind(this)); |
| } |
| }; |
| |
| IDEDevice.prototype.ata_read_sectors_dma = function(cmd) |
| { |
| var count = this.bytecount & 0xff, |
| lba = this.get_lba28(); |
| |
| var byte_count = count * this.sector_size, |
| start = lba * this.sector_size; |
| |
| dbg_log("ATA DMA read lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count), LOG_DISK); |
| |
| this.cylinder_low += count; |
| |
| if(start + byte_count > this.buffer.byteLength) |
| { |
| dbg_log("ATA read: Outside of disk", LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| return; |
| } |
| |
| //this.status = 0xFF & ~8; |
| this.status = 0x80; |
| this.dma_status |= 1; |
| this.report_read_start(); |
| |
| this.buffer.get(start, byte_count, function(data) |
| { |
| var prdt_start = this.prdt_addr, |
| offset = 0; |
| |
| do { |
| var addr = this.memory.read32s(prdt_start), |
| count = this.memory.read16(prdt_start + 4), |
| end = this.memory.read8(prdt_start + 7) & 0x80; |
| |
| if(!count) |
| { |
| count = 0x10000; |
| } |
| |
| dbg_log("dma read dest=" + h(addr) + " count=" + h(count), LOG_DISK); |
| this.memory.write_blob(data.subarray(offset, offset + count), addr); |
| |
| offset += count; |
| prdt_start += 8; |
| } |
| while(!end); |
| |
| this.status = 0x50; |
| this.dma_status &= ~2 & ~1; |
| this.dma_status |= 4; |
| |
| this.push_irq(); |
| |
| this.report_read_end(byte_count); |
| }.bind(this)); |
| }; |
| |
| IDEDevice.prototype.ata_write = function(cmd) |
| { |
| if(cmd === 0x30) |
| { |
| // write sectors |
| var count = this.bytecount & 0xff, |
| lba = this.is_lba ? this.get_lba28() : this.get_chs(); |
| |
| if(count === 0) |
| count = 0x100; |
| } |
| else if(cmd === 0x34 || cmd === 0x39) |
| { |
| var count = this.bytecount, |
| lba = this.get_lba48(); |
| |
| if(count === 0) |
| count = 0x10000; |
| } |
| else |
| { |
| dbg_assert(false); |
| return; |
| } |
| |
| var byte_count = count * this.sector_size, |
| start = lba * this.sector_size; |
| |
| |
| dbg_log("ATA write lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count), LOG_DISK); |
| |
| this.cylinder_low += count; |
| |
| if(start + byte_count > this.buffer.byteLength) |
| { |
| dbg_log("ATA write: Outside of disk", LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| } |
| else |
| { |
| this.status = 0x50; |
| this.next_status = 0x58; |
| |
| this.allocate_in_buffer(byte_count); |
| |
| this.write_dest = start; |
| this.data_port_callback = IDE_CALLBACK_WRITE; |
| |
| //this.bytecount = 1; |
| this.push_irq(); |
| } |
| }; |
| |
| IDEDevice.prototype.ata_write_dma = function(cmd) |
| { |
| var count = this.bytecount & 0xff, |
| lba = this.get_lba28(); |
| |
| var byte_count = count * this.sector_size, |
| start = lba * this.sector_size; |
| |
| dbg_log("ATA DMA write lba=" + h(lba) + |
| " lbacount=" + h(count) + |
| " bytecount=" + h(byte_count), LOG_DISK); |
| |
| this.cylinder_low += count; |
| |
| if(start + byte_count > this.buffer.byteLength) |
| { |
| dbg_log("ATA DMA write: Outside of disk", LOG_DISK); |
| |
| this.status = 0xFF; |
| this.push_irq(); |
| return; |
| } |
| |
| //status = 0xFF & ~8; |
| this.status = 0x80; |
| this.dma_status |= 1; |
| |
| var prdt_start = this.prdt_addr, |
| prdt_count = 0, |
| prdt_write_count = 0, |
| offset = 0; |
| |
| |
| do { |
| var prd_addr = this.memory.read32s(prdt_start), |
| prd_count = this.memory.read16(prdt_start + 4), |
| end = this.memory.read8(prdt_start + 7) & 0x80; |
| |
| if(!prd_count) |
| { |
| prd_count = 0x10000; |
| } |
| |
| dbg_log("dma write dest=" + h(prd_addr) + " prd_count=" + h(prd_count), LOG_DISK); |
| |
| var slice = this.memory.mem8.subarray(prd_addr, prd_addr + prd_count); |
| |
| this.buffer.set(start + offset, slice, function() |
| { |
| prdt_write_count++; |
| |
| if(prdt_write_count === prdt_count) |
| { |
| dbg_log("dma write completed", LOG_DISK); |
| this.status = 0x50; |
| this.push_irq(); |
| this.dma_status &= ~2 & ~1; |
| this.dma_status |= 4; |
| } |
| }.bind(this)); |
| |
| offset += prd_count; |
| prdt_start += 8; |
| prdt_count++; |
| } |
| while(!end); |
| |
| |
| if(prdt_write_count === prdt_count) |
| { |
| dbg_log("dma write completed", LOG_DISK); |
| this.status = 0x50; |
| this.push_irq(); |
| this.dma_status &= ~2 & ~1; |
| this.dma_status |= 4; |
| } |
| |
| this.report_write(byte_count); |
| }; |
| |
| IDEDevice.prototype.get_chs = function() |
| { |
| var c = this.cylinder_low & 0xFF | this.cylinder_high << 8 & 0xFF00, |
| h = this.head, |
| s = this.sector & 0xFF; |
| |
| return (c * this.head_count + h) * this.sectors_per_track + s - 1; |
| }; |
| |
| IDEDevice.prototype.get_lba28 = function() |
| { |
| return this.sector & 0xFF | this.cylinder_low << 8 & 0xFF00 | this.cylinder_high << 16 & 0xFF0000; |
| }; |
| |
| IDEDevice.prototype.get_lba48 = function() |
| { |
| // Note: Bits over 32 missing |
| return (this.sector & 0xFF | this.cylinder_low << 8 & 0xFF00 | this.cylinder_high << 16 & 0xFF0000 | |
| (this.sector >> 8) << 24 & 0xFF000000) >>> 0; |
| }; |
| |
| IDEDevice.prototype.create_identify_packet = function() |
| { |
| this.data_pointer = 0; |
| // http://bochs.sourceforge.net/cgi-bin/lxr/source/iodev/harddrv.cc#L2821 |
| |
| if(this.drive_head & 0x10) |
| { |
| // slave |
| this.pio_data = new Uint8Array(0); |
| return; |
| } |
| |
| this.pio_data = new Uint8Array([ |
| 0x40, this.is_atapi ? 0x85 : 0, |
| // 1 cylinders |
| this.cylinder_count, this.cylinder_count >> 8, |
| 0, 0, |
| |
| // 3 heads |
| this.head_count, this.head_count >> 8, |
| 0, 0, |
| // 5 |
| 0, 0, |
| // sectors per track |
| this.sectors_per_track, 0, |
| 0, 0, 0, 0, 0, 0, |
| // 10-19 serial number |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| // 15 |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| // 20 |
| 3, 0, |
| 0, 2, |
| 4, 0, |
| // 23-26 firmware revision |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| |
| // 27 model number |
| 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, |
| 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, |
| |
| // 47 |
| 0xFF, 0, |
| 1, 0, |
| 0, 3, // capabilities, 2: Only LBA / 3: LBA and DMA |
| // 50 |
| 0, 0, |
| 0, 2, |
| 0, 2, |
| 7, 0, |
| |
| // 54 cylinders |
| this.cylinder_count, this.cylinder_count >> 8, |
| // 55 heads |
| this.head_count, this.head_count >> 8, |
| // 56 sectors per track |
| this.sectors_per_track, 0, |
| // capacity in sectors |
| this.sector_count & 0xFF, this.sector_count >> 8 & 0xFF, |
| this.sector_count >> 16 & 0xFF, this.sector_count >> 24 & 0xFF, |
| |
| 0, 0, |
| // 60 |
| this.sector_count & 0xFF, this.sector_count >> 8 & 0xFF, |
| this.sector_count >> 16 & 0xFF, this.sector_count >> 24 & 0xFF, |
| |
| 0, 0, |
| // 63, dma selected mode |
| 0, 4, |
| //0, 0, // no DMA |
| |
| 0, 0, |
| // 65 |
| 30, 0, 30, 0, 30, 0, 30, 0, 0, 0, |
| // 70 |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| // 75 |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| // 80 |
| 0x7E, 0, 0, 0, 0, 0, 0, 0x74, 0, 0x40, |
| // 85 |
| 0, 0x40, 0, 0x74, 0, 0x40, 0, 0, 0, 0, |
| // 90 |
| 0, 0, 0, 0, 0, 0, 1, 0x60, 0, 0, |
| // 95 |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| // 100 |
| this.sector_count & 0xFF, this.sector_count >> 8 & 0xFF, |
| this.sector_count >> 16 & 0xFF, this.sector_count >> 24 & 0xFF, |
| ]); |
| |
| if(this.cylinder_count > 16383) |
| { |
| this.pio_data[2] = this.pio_data[108] = 16383 & 0xFF; |
| this.pio_data[3] = this.pio_data[109] = 16383 >> 8; |
| } |
| }; |
| |
| IDEDevice.prototype.dma_read_addr = function() |
| { |
| return this.prdt_addr; |
| }; |
| |
| IDEDevice.prototype.dma_set_addr = function(data) |
| { |
| this.prdt_addr = data; |
| }; |
| |
| IDEDevice.prototype.dma_read_status = function() |
| { |
| dbg_log("DMA read status: " + h(this.dma_status), LOG_DISK); |
| return this.dma_status; |
| }; |
| |
| IDEDevice.prototype.dma_write_status = function(value) |
| { |
| dbg_log("DMA set status: " + h(value), LOG_DISK); |
| this.dma_status &= ~value; |
| }; |
| |
| |
| IDEDevice.prototype.dma_read_command = function() |
| { |
| dbg_log("DMA read command", LOG_DISK); |
| return 1 | this.dma_read_status() << 16; |
| }; |
| |
| IDEDevice.prototype.dma_read_command8 = function() |
| { |
| dbg_log("DMA read command8", LOG_DISK); |
| return 1; |
| }; |
| |
| |
| IDEDevice.prototype.dma_write_command = function(value) |
| { |
| dbg_log("DMA write command: " + h(value), LOG_DISK); |
| |
| if(value & 1) |
| { |
| this.push_irq(); |
| } |
| |
| this.dma_write_status(value >> 16 & 0xFF); |
| }; |
| |
| |
| IDEDevice.prototype.dma_write_command8 = function(value) |
| { |
| dbg_log("DMA write command8: " + h(value), LOG_DISK); |
| |
| if(value & 1) |
| { |
| this.push_irq(); |
| } |
| }; |
| |
| IDEDevice.prototype.report_read_start = function() |
| { |
| this.stats.loading = true; |
| this.bus.send("ide-read-start"); |
| }; |
| |
| IDEDevice.prototype.report_read_end = function(byte_count) |
| { |
| this.stats.loading = false; |
| |
| var sector_count = byte_count / this.sector_size | 0; |
| this.stats.sectors_read += sector_count; |
| this.stats.bytes_read += byte_count; |
| |
| this.bus.send("ide-read-end", [this.nr, byte_count, sector_count]); |
| }; |
| |
| IDEDevice.prototype.report_write = function(byte_count) |
| { |
| var sector_count = byte_count / this.sector_size | 0; |
| this.stats.sectors_written += sector_count; |
| this.stats.bytes_written += byte_count; |
| |
| this.bus.send("ide-write-end", [this.nr, byte_count, sector_count]); |
| }; |
| |