| Latest status for I7000 Cpus: | |
| ## i701 | |
| * Largely untested. | |
| ## i704 | |
| * SAP works. | |
| * Fort2 unfinished. | |
| ## i7010 | |
| * PR155 works. | |
| * PR108 works. | |
| * Most Diags appear to pass without serious error. | |
| * Protection mode has some errors left. | |
| * Protection mode does not handle setting H or L to 0. | |
| ## i7070 | |
| * Will load Diags, need to remember how to run them to run | |
| * tests on machine. | |
| ## i7080 | |
| * Sort of working. | |
| * RWW, ECB untested. | |
| * TLx instructions implimented, untested, see 8SE | |
| * Will boot from card. | |
| * Tape system appear to be working. | |
| * 8CU10B errors: | |
| 410, 412, 413, 414, 418, 419, 420-427 error becuase | |
| storage is not parity checked. | |
| 440 divide not producing correct sign on error. | |
| ## i7090 | |
| * Working with exceptions. | |
| * Known bugs: | |
| * DFDP/DFMP Sometimes off by +/-1 or 2 in least signifigant part of result. | |
| * EAD +n + -n should be -0 is +0 | |
| * Not all channel skips working for 9P01C. | |
| * HTx Not sure what problems are, does not quite work. | |
| * DKx Sometimes fails diagnostics with missing inhibit of interrupt. | |
| * CTSS works. | |
| * IBSYS works. | |
| * Stand alone assembler works. | |
| * Lisp 1.5 works. | |
| * Signifigence mode Not tested, Test Code Needed. | |